Distribution of Effective Ferrierite Active Sites for Skeletal Isomerization of n ‐Butene to Isobutene

2019 ◽  
Vol 4 (27) ◽  
pp. 7851-7857 ◽  
Author(s):  
Wen Liu ◽  
Haiqiang Hu ◽  
Yang Liu ◽  
Lei Zhang ◽  
Chengjie Xia ◽  
...  
Keyword(s):  
Active Sites ◽  
Skeletal Isomerization

Catalysis at the interface of nano-oxides and nanozeolites

2008 ◽  
Vol 80 (11) ◽  
pp. 2273-2282 ◽  
Author(s):  
Kyosuke Ito ◽  
Hui Jang ◽  
Koji Sakashita ◽  
Sachio Asaoka
Keyword(s):  
Catalytic Property ◽  
Active Sites ◽  
Environmentally Friendly ◽  
Skeletal Isomerization ◽  
The Novel ◽  
Nanometer Size ◽  
Nano Oxide ◽  
Cracking Reaction ◽  
Type Zeolite ◽  
Strong Acids

The catalysts that can efficiently hydro-reform higher n-paraffin to lower isoparaffins for environmentally friendly gasoline were studied. The catalysts were examined by the conversion of n-hexadecane, n-C16H34 to i-C6H14~i-C12H26. The tri-modally nanoporous (nanometer-size) catalysts composed of (Ni-Mo)/[γ-Al2O3], nano-oxide, and nanocrystalline zeolite have some active and selective performances because of the cooperation between (Ni-Mo)/[γ-Al2O3] and the composite of nano-oxide-nanozeolite. The (Ni-Mo)/[γ-Al2O3] component holding the skeletal isomerization activity enhances the cracking activity on the composite of nanoporous (np)-Al2O3-USY (ultra-stable Y-type zeolite) to result in i-C6H14~i-C12H26 as the isomerization of n-hexadecane followed the cracking reaction. The catalyst composed of nanocrystalline BEA (beta-type zeolite) or MFI (ZSM-5-type zeolite) zeolite can be more activated with the nano-SiO2 than with the nano-Al2O3. The catalyst composed of the dealuminated zeolite, USY (SiO2/Al2O3 = 12) cannot be activated with the nano-SiO2 but with the nano-Al2O3. This activation depends on the SiO2/Al2O3 ratio of the USY. It is considered that the catalytic property of the three components is partially due to the novel active sites formed concertedly at the interface of the nano-oxides and the nanozeolites. The novel sites have a major role for the isomerization and cracking as the moderate and strong acids and are generated when Si-OH in the nanopores of the USY resulted from the dealumination catches Al-OH in the nano-Al2O3 to form Si-O-Al-O-Al-O-Si instead of Si-O-Al-O-Si-O-Si-O.

What catalysis needs from the electron microscopist

1988 ◽  
Vol 46 ◽  
pp. 694-695
Author(s):  
Alexis T. Bell
Keyword(s):  
Active Sites ◽  
Heterogeneous Catalysts ◽  
Catalyst Deactivation ◽  
Surface Composition ◽  
Internal Surface ◽  
Active Phase ◽  
Atomic Scale ◽  
Metal Catalyst ◽  
Internal Surface Area ◽  
Porous Support

Heterogeneous catalysts, used in industry for the production of fuels and chemicals, are microporous solids characterized by a high internal surface area. The catalyticly active sites may occur at the surface of the bulk solid or of small crystallites deposited on a porous support. An example of the former case would be a zeolite, and of the latter, a supported metal catalyst. Since the activity and selectivity of a catalyst are known to be a function of surface composition and structure, it is highly desirable to characterize catalyst surfaces with atomic scale resolution. Where the active phase is dispersed on a support, it is also important to know the dispersion of the deposited phase, as well as its structural and compositional uniformity, the latter characteristics being particularly important in the case of multicomponent catalysts. Knowledge of the pore size and shape is also important, since these can influence the transport of reactants and products through a catalyst and the dynamics of catalyst deactivation.

Scanning luminescence x-ray microscopy: Progress toward selective staining using microspheres

1994 ◽  
Vol 52 ◽  
pp. 74-75
Author(s):  
C. Jacobsen ◽  
J. Fu ◽  
S. Mayer ◽  
Y. Wang ◽  
S. Williams
Keyword(s):  
Visible Light ◽  
Active Sites ◽  
Light Emission ◽  
Chinese Hamster ◽  
Polystyrene Spheres ◽  
Good Resistance ◽  
X Ray ◽  
Selective Staining ◽  
Visible Light Emission ◽  
Specific Labelling

In scanning luminescence x-ray microscopy (SLXM), a high resolution x-ray probe is used to excite visible light emission (see Figs. 1 and 2). The technique has been developed with a goal of localizing dye-tagged biochemically active sites and structures at 50 nm resolution in thick, hydrated biological specimens. Following our initial efforts, Moronne et al. have begun to develop probes based on biotinylated terbium; we report here our progress towards using microspheres for tagging.Our initial experiments with microspheres were based on commercially-available carboxyl latex spheres which emitted ~ 5 visible light photons per x-ray absorbed, and which showed good resistance to bleaching under x-ray irradiation. Other work (such as that by Guo et al.) has shown that such spheres can be used for a variety of specific labelling applications. Our first efforts have been aimed at labelling ƒ actin in Chinese hamster ovarian (CHO) cells. By using a detergent/fixative protocol to load spheres into cells with permeabilized membranes and preserved morphology, we have succeeded in using commercial dye-loaded, spreptavidin-coated 0.03μm polystyrene spheres linked to biotin phalloidon to label f actin (see Fig. 3).

The design and catalytic performance of molybdenum active sites on an MCM-41 framework for the aerobic oxidation of 5-hydroxymethylfurfural to 2,5-diformylfuran

2019 ◽  
Vol 9 (3) ◽  
pp. 811-821 ◽  
Author(s):  
Zhao-Meng Wang ◽  
Li-Juan Liu ◽  
Bo Xiang ◽  
Yue Wang ◽  
Ya-Jing Lyu ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Active Sites ◽  
Aerobic Oxidation ◽  
Catalytic Performance ◽  
Mcm 41

The catalytic activity decreases as –(SiO)3Mo(OH)(O) > –(SiO)2Mo(O)2 > –(O)4–MoO.

A novel ligand with –NH2 and –COOH-decorated Co/Fe-based oxide for an efficient overall water splitting: dual modulation roles of active sites and local electronic structure

2020 ◽  
Vol 10 (18) ◽  
pp. 6266-6273
Author(s):  
Yalan Zhang ◽  
Zebin Yu ◽  
Ronghua Jiang ◽  
Jung Huang ◽  
Yanping Hou ◽  
...  
Keyword(s):  
Electronic Structure ◽  
Water Splitting ◽  
Energy Demand ◽  
Active Sites ◽  
Electrode Materials ◽  
Global Energy ◽  
Overall Water Splitting ◽  
Local Electronic Structure ◽  
Electrochemical Water Splitting

Excellent electrochemical water splitting with remarkable durability can provide a solution to satisfy the increasing global energy demand in which the electrode materials play an important role.

“Active Sites” on Platelet Membranes

1975 ◽  
Vol 34 (03) ◽  
pp. 859-860
Author(s):  
M. G Davey
Keyword(s):  
Active Sites ◽  
Platelet Membranes

A Pyridinic Fe-N4 Macrocycle Effectively Models the Active Sites in Fe/N-Doped Carbon Electrocatalysts

2020 ◽  
Author(s):  
Travis Marshall-Roth ◽  
Nicole J. Libretto ◽  
Alexandra T. Wrobel ◽  
Kevin Anderton ◽  
Nathan D. Ricke ◽  
...  
Keyword(s):  
Oxygen Reduction ◽  
Active Sites ◽  
Catalytic Properties ◽  
Reduction Reaction ◽  
Iron Phthalocyanine ◽  
Electrochemical Studies ◽  
Onset Potential ◽  
Nitrogen Doped Carbon ◽  
Iron Active Sites

Iron- and nitrogen-doped carbon (Fe-N-C) materials are leading candidates to replace platinum in fuel cells, but their active site structures are poorly understood. A leading postulate is that iron active sites in this class of materials exist in an Fe-N<sub>4</sub> pyridinic ligation environment. Yet, molecular Fe-based catalysts for the oxygen reduction reaction (ORR) generally feature pyrrolic coordination and pyridinic Fe-N<sub>4</sub> catalysts are, to the best of our knowledge, non-existent. We report the synthesis and characterization of a molecular pyridinic hexaazacyclophane macrocycle, (phen<sub>2</sub>N<sub>2</sub>)Fe, and compare its spectroscopic, electrochemical, and catalytic properties for oxygen reduction to a prototypical Fe-N-C material, as well as iron phthalocyanine, (Pc)Fe, and iron octaethylporphyrin, (OEP)Fe, prototypical pyrrolic iron macrocycles. N 1s XPS signatures for coordinated N atoms in (phen<sub>2</sub>N<sub>2</sub>)Fe are positively shifted relative to (Pc)Fe and (OEP)Fe, and overlay with those of Fe-N-C. Likewise, spectroscopic XAS signatures of (phen<sub>2</sub>N<sub>2</sub>)Fe are distinct from those of both (Pc)Fe and (OEP)Fe, and are remarkably similar to those of Fe-N-C with compressed Fe–N bond lengths of 1.97 Å in (phen<sub>2</sub>N<sub>2</sub>)Fe that are close to the average 1.94 Å length in Fe-N-C. Electrochemical studies establish that both (Pc)Fe and (phen<sub>2</sub>N<sub>2</sub>)Fe have relatively high Fe(III/II) potentials at ~0.6 V, ~300 mV positive of (OEP)Fe. The ORR onset potential is found to directly correlate with the Fe(III/II) potential leading to a ~300 mV positive shift in the onset of ORR for (Pc)Fe and (phen<sub>2</sub>N<sub>2</sub>)Fe relative to (OEP)Fe. Consequently, the ORR onset for (phen<sub>2</sub>N<sub>2</sub>)Fe and (Pc)Fe is within 150 mV of Fe-N-C. Unlike (OEP)Fe and (Pc)Fe, (phen<sub>2</sub>N<sub>2</sub>)Fe displays excellent selectivity for 4-electron ORR with <4% maximum H<sub>2</sub>O<sub>2</sub> production, comparable to Fe-N-C materials. The aggregate spectroscopic and electrochemical data establish (phen<sub>2</sub>N<sub>2</sub>)Fe as a pyridinic iron macrocycle that effectively models Fe-N-C active sites, thereby providing a rich molecular platform for understanding this important class of catalytic materials.<p><b></b></p>

Sign in / Sign up

Export Citation Format

Share Document