A Computational Study of Reconstruction Algorithms for Synthetic Aperture Diffraction Tomography: Interpolation Versus Interpolation-Free

1988 ◽  
pp. 421-443 ◽  
Author(s):  
Jian-Yu Lu
2005 ◽  
Vol 3 ◽  
pp. 167-174 ◽  
Author(s):  
R. Marklein ◽  
K. J. Langenberg ◽  
K. Mayer ◽  
J. Miao ◽  
A. Shlivinski ◽  
...  

Abstract. This paper presents recent advances and future challenges of the application of different linear and nonlinear inversion algorithms in acoustics, electromagnetics, and elastodynamics. The presented material can be understood as an extension of our previous work on this topic. The inversion methods considered in this presentation vary from linear schemes, like the Synthetic Aperture Radar (SAR) applied electromagnetics and the Synthetic Aperture Focussing Technique (SAFT) as its counterpart in ultrasonics, and the linearized Diffraction Tomography (DT), to nonlinear schemes, like the Contrast Source Inversion (CSI) combined with different regularization approaches. Inversion results of the above mentioned inversion schemes are presented and compared for instance for time-domain ultrasonic data from the Fraunhofer-Institute for Nondestructive Testing (IZFP, Saarbrücken, Germany). Convenient tools for nondestructive evaluation of solids can be electromagnetic and/or elastodynamic waves; since their governing equations, including acoustics, exhibit strong structural similarities, the same inversion concepts apply. In particular, the heuristic SAFT algorithm can be and has been utilized for all kinds of waves, once a scalar approximation can be justified. Relating SAFT to inverse scattering in terms of diffraction tomography, it turns out that linearization is the most stringent inherent approximation. A comparison of the inversion results using the linear time-domain inversion scheme SAFT and well tested nonlinear frequency-domain inversion schemes demonstrates the considerable potential to extend and improve the ultrasonic imaging technique SAFT while consulting the mathematics of wavefield inversion, yet, in particular if the underlying effort is considered, the relatively simple and effective SAFT algorithm works surprisingly well. Since SAFT is a widely accepted imaging tool in ultrasonic NDE it seems worthwhile to check its formal restrictions and assumptions whether they could be overcome and whether they would outperform the standard and original SAFT algorithm.


Author(s):  
D. Bruck ◽  
M. Fischer ◽  
K.J. Langenberg ◽  
V. Schmitz

Author(s):  
Francesco Simonetti ◽  
Lianjie Huang

Tomography of complex three-dimensional objects with ultrasound or microwave has been a long-standing goal since the introduction of these technologies after World War II. While current state-of-the-art systems can provide high-resolution images of cylindrical objects characterized by a two-dimensional structure, the three-dimensional case remains an open challenge owing to current limitations of sensor technology and computer power. Here, this problem is addressed by means of a synthetic aperture technique that, while using hardware technology developed for two-dimensional problems, accounts for the complexity of three-dimensional scattering and leads to high-resolution three-dimensional reconstructions. In this paper, we present the theoretical formulation of this new approach and illustrate it by means of a numerical example.


2019 ◽  
Author(s):  
Jerald Bauck

Spotlight-mode synthetic aperture radar imaging is studied from the viewpoint of tomographic signal processing which allows the relaxation of the nearly-universal assumption that plane waves pass over the ground patch. This allows high-quality image reconstruction in the face of arbitrary amounts of wavefront curvature such as would be present when the angle subtended by the ground patch, as seen by the radar, is not small. One such application is wide-area surveillance. A meth- odology is used which has the benefits of a wideband transmitted signal (impulse) and a sensible simulation. Image reconstruction algorithms are developed for monostatic and bistatic systems. Simulation results using these algorithms compare favorably with baseline simulations which use a more conventional algorithm operating on data which do not embody the effects of wavefront curvature. Comments on system design and computational implementation are made as necessary. A new set of problems which appear to benefit from the tomographic viewpoint is posed. This work may also find applications in some forms of reflection tomography.


Sign in / Sign up

Export Citation Format

Share Document