scholarly journals Low-Cost Alternative Renewable Energy Bioethanol Production from Palm Oil in Malaysian Context

2012 ◽  
pp. 97-104 ◽  
Author(s):  
Ravindra Pogaku ◽  
Tapan Kumar Biswas ◽  
Rahmath Abdulla
2010 ◽  
Vol 64 (4) ◽  
pp. 283-293 ◽  
Author(s):  
Zlatica Predojevic

The use of renewable energy sources (biofuels), either as a component in the conventional fossil fuels, gasoline and diesel, or as a pure biofuel, contributes to energy saving and decrease of total CO2 emission. The use of bioethanol mixed with gasoline significantly decreases gasoline consumption and contributes to environment protection. One of the problems in the production of bioethanol is the availability of sugar and starch based feedstock used for its production. However, lignocellulosic feedstocks are becoming more significant in the production of bioethanol due to their availability and low cost. The aim of this study is to point out the advantages and shortcomings of pretreatment processes and hydrolyses of lignocellulosic feedstocks that precede their fermentation to bioethanol.


Energies ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2803
Author(s):  
Wiraditma Prananta ◽  
Ida Kubiszewski

In early 2020, Indonesia implemented the biodiesel 30 (B30) program as an initiative to reduce Indonesia’s dependency on fossil fuels and to protect Indonesia’s palm oil market. However, palm oil has received international criticism due to its association with harmful environmental externalities. This paper analysed whether an investment in palm oil-based biofuel (POBB) provides Indonesia with the ability to achieve its environmental and financial goals. In this research, we performed a meta-analysis on biofuel energy return on investment (EROI) by examining 44 biofuel projects using ten types of biofuel feedstocks from 13 countries between 1995 and 2016. Results showed an average EROI of 3.92 and 3.22 for POBB and other biomass-based biofuels (OBBB), respectively. This shows that if only energy inputs and outputs are considered, biofuels provide a positive energy return. However, biofuels, including those from palm oil, produce externalities especially during land preparation and land restoration. We also compared these EROI biofuel results with other renewable energy sources and further analysed the implications for renewable energies to meet society’s energy demands in the future. Results showed that biofuel gives the lowest EROI compared to other renewable energy sources. Its EROI of 3.92, while positive, has been categorised as “not feasible for development”. If Indonesia plans to continue with its biofuel program, some major improvements will be necessary.


2017 ◽  
Vol 114 (26) ◽  
pp. E5021-E5023 ◽  
Author(s):  
Mark Z. Jacobson ◽  
Mark A. Delucchi ◽  
Mary A. Cameron ◽  
Bethany A. Frew

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Nurul Shuhada Mohd Makhtar ◽  
Miradatul Najwa Muhd Rodhi ◽  
Mohibah Musa ◽  
Ku Halim Ku Hamid

Starch is used whenever there is a need for natural elastic properties combined with low cost of production. However, the hydrophilic properties in structural starch will decrease the thermal performance of formulated starch polymer. Therefore, the effect of glycerol, palm olein, and crude palm oil (CPO), as plasticizers, on the thermal behavior ofTacca leontopetaloidesstarch incorporated with natural rubber in biopolymer production was investigated in this paper. Four different formulations were performed and represented by TPE1, TPE2, TPE3, and TPE4. The compositions were produced by using two-roll mill compounding. The sheets obtained were cut into small sizes prior to thermal testing. The addition of glycerol shows higher enthalpy of diffusion in which made the material easily can be degraded, leaving to an amount of 6.6% of residue. Blending of CPO with starch (TPE3) had a higher thermal resistance towards high temperature up to 310°C and the thermal behavior of TPE2 only gave a moderate performance compared with other TPEs.


2018 ◽  
Vol 25 (22) ◽  
pp. 21644-21655 ◽  
Author(s):  
Mohamad Sukri Mohamad Yusof ◽  
Mohd Hafiz Dzarfan Othman ◽  
Azeman Mustafa ◽  
Mukhlis Abdul Rahman ◽  
Juhana Jaafar ◽  
...  

To make micro grid with renewable energy and to over come the technical challenges and economy base and policy and regulatory challenges . From the natural wastage we can generate the Electricity. Thus, the Electrical Power or Electricity is available with a low cost and pollution free to anyplace in the world at all times. This process divulge a unequaled step in electricity generation and this type of generation is maintain the ecological balance. We can have an uninterrupted power supply irrespective of the natural condition without any kind of environmental pollution. More influence this process relent the less production cost for electricity generation. Micro grids have long been used in remote areas to power off-grid villages, military operations or industrial projects. But increasingly they are being used in cities or towns, in urban centers. Here we try a proto type of micro grid with renewable energy sources.


2021 ◽  
Author(s):  
Wijittra Wongjaikham ◽  
Doonyapong Wongsawaeng ◽  
Vareeporn Ratnitsai ◽  
Manita Kamjam ◽  
Kanokwan Ngaosuwan ◽  
...  

Abstract Fatty acid methyl esters (FAMEs) are sustainable biofuel that can alleviate high oil cost and environmental impacts of petroleum-based fuel. A modified 1,200 W high efficiency fruit blender was employed for continuous transesterification of various refined vegetable oils and waste cooking oil (WCO) using sodium hydroxide as a homogeneous catalyst. The following factors have been investigated on their effects on FAME yield: baffles, reaction volume, total reactant flow rate, methanol-oil molar ratio, catalyst concentration and reaction temperature. Results indicated that the optimal conditions were: 2,000 mL reaction volume, 50 mL/min total flow rate, 1% and 1.25% catalyst concentration for refined palm oil and WCO, respectively, 6:1 methanol-to-oil molar ratio and 62 - 63oC, obtaining yield efficiency over 96.5% FAME yield of 21.14 ´ 10-4 g.J-1 (for palm oil) and 19.39 ´ 10-4 g.J-1 (for WCO). All the properties of produced FAMEs meet the EN 14214 and ASTM D6751 standards. The modified household fruit blender could be a practical and low-cost alternative biodiesel production apparatus for continuous biodiesel production for small communities in remote areas.


Sign in / Sign up

Export Citation Format

Share Document