Determination of Plasma Parameters from the Shape of Spectral Lines

1971 ◽  
pp. 68-112
Author(s):  
I. M. Podgornyi
1992 ◽  
Vol 56 (3) ◽  
pp. 281-286
Author(s):  
Ya. F. Volkov ◽  
V. V. Marinin ◽  
N. I. Mitina ◽  
M. A. Tiarov ◽  
S. A. Trubchaninov

Atoms ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 29
Author(s):  
Sylvie Sahal-Bréchot

The present paper revisits the determination of the semi-classical limit of the Feshbach resonances which play a role in electron impact broadening (the so-called “Stark“ broadening) of isolated spectral lines of ionized atoms. The Gailitis approximation will be used. A few examples of results will be provided, showing the importance of the role of the Feshbach resonances.


Author(s):  
Junxiao Wang ◽  
Shuqing Wang ◽  
Lei Zhang ◽  
Maogen Su ◽  
Duixiong Sun ◽  
...  

Abstract We proposed a theoretical spatio-temporal imaging method, which was based on the thermal model of laser ablation and the two-dimensional axisymmetric multi-species hydrodynamics model. By using the intensity formula, the integral intensity of spectral lines could be calculated and the corresponding images of intensity distribution could be drawn. Through further image processing such as normalization, determination of minimum intensity, combination and color filtering, a relatively clear species distribution image in the plasma could be obtained. Using the above method, we simulated the plasma ablated from Al-Mg alloy by different laser energies under 1 atm argon, and obtained the theoretical spatio-temporal distributions of Mg I, Mg II, Al I, Al II and Ar I species, which are almost consistent with the experimental results by differential imaging. Compared with the experimental decay time constants, the consistency is higher at low laser energy, indicating that our theoretical model is more suitable for the plasma dominated by laser-supported combustion wave.


2015 ◽  
Vol 1095 ◽  
pp. 218-221
Author(s):  
Lan Ma ◽  
Guang He Qin ◽  
Qiong Yu ◽  
Jing Zhou

A Method was studied for the determination of Al、Cu、Ni in Zr-based amorphous alloy by inductively coupled plasma atomic emission spectrometry (ICP-AES). Samples were dissolved by hydrochloric acid,nitric acid and hydrofluoric acid,analytical spectral lines for aluminum,copper,nickle are 308.215nm,327.396nm and 231.604nm.Interference of zinc was eliminated by the matrix-matching method, the experiments were done with optimized Operating Parameters. The correlation coefficients of the calibration curve are all 0.999,detection limits are 0.0010%,0.005% and 0.0006% respectively,and the range of recovery is 98%-104%.


2007 ◽  
Vol 4 (S1) ◽  
pp. S527-S530 ◽  
Author(s):  
Ruben Wiese ◽  
Holger Kersten ◽  
Mario Hannemann ◽  
Volker Sittinger ◽  
Florian Ruske ◽  
...  

2011 ◽  
Vol 37 (11) ◽  
pp. 935-947 ◽  
Author(s):  
E. O. Baronova ◽  
V. P. Vinogradov ◽  
V. I. Krauz ◽  
V. V. Myalton ◽  
A. M. Stepanenko ◽  
...  
Keyword(s):  

2003 ◽  
pp. 69-74 ◽  
Author(s):  
Oliver Vince ◽  
Istvan Vince

By using the Blackwell program package by R.O. Gray, the metallicity of the HR7914 solar-like star was determined. The program package utilizes measured equivalent widths of several chosen neutral iron spectral lines from the observed spectra, appropriate atomic and spectral line parameters and adequate Kurucz?s stellar atmosphere models. The method is based on determination of the minimum dispersion of the iron abundance versus microturbulent velocity functions for the selected neutral iron spectral lines. The spectra were observed at National Astronomical Observatory Rozhen (NAO Rozhen), Bulgaria, using the 2m-telescope and Coude spectrograph. They were reduced with the IRAF program package. The measurement of the spectral line parameters was done with the SPE program package. The metallicity of the HR7914 solar-like star was determined to be 0.02.


2021 ◽  
pp. 171-175
Author(s):  
A. Murmantsev ◽  
A. Veklich ◽  
V. Boretskij

This work is devoted to spectroscopy peculiarities of electric arc discharge plasma with iron vapours. The solution of the main issue of optical emission spectroscopy, namely, selection of iron spectral lines, to study the parameters of non-uniform and non-steady-state plasma source, was considered within this paper. Specifically, the Boltzmann plots technique was used for detailed analysing of application possibility of Fe I spectral lines as well as for determination of plasma temperature. The spatial profiles of selected spectral line emission intensities were used to measure the radial distributions of plasma temperature of free-burning arc discharge between consumable electrodes at 3.5 A.


Sign in / Sign up

Export Citation Format

Share Document