Disturbance of Capacitive Liquid Level Gauges by Nuclear Radiation

1967 ◽  
pp. 666-672
Author(s):  
W. L. Willis
Metrologiya ◽  
2020 ◽  
pp. 38-51
Author(s):  
V. N. Astapov ◽  
I. N. Kozlova

This article presents the rationale and methodology for developing an intrinsically safe device, namely, a hydrostatic fiber optic sensor with a position-sensitive detector for monitoring the level of oil products in large-capacity tanks at oil depots and during pumping in a raw material warehouses. This device suitable for continuous monitoring of the liquid level, based on the measurement of a hydrostatic column of liquid with automatic offset of changes in the density of the liquid. Offset is carried out by means of a displacer (a fully submerged float), inside which a housing with a position-sensitive detector (PSD) is integrated. Theoretical validation of the bellows suspension usage for a displacer is given. During filling a container with a liquid whose level is measured, liquid bellows, the movement of which is recorded by an optical triangulation sensor using the reflected infrared ray incident on the bottom of the bellows. The principle of the triangulation sensor operation is based on the geometric properties of the triangles. The pulses of infrared radiation come through a fiber optic cable. In order to measure the movement of the surface (the bottom of the bellows) by measuring the movement of the reflected beam, a position-sensitive detector is used, which is located in a remote controller. In this device for the intrinsic safety problem solution, optical inputs of a fiber optic flat cable are located in the active zone of the sensor, which is connected to the optical inputs of a position-sensitive detector, operated on the principles of photoelectric effect. The light spot moving along the sensitive zone and converted by the detector into a one-dimensional signal proportional to the distance to the object. hydrostatically applies pressure over the entire effective area of the measuring


1963 ◽  
Vol 81 (12) ◽  
pp. 641-668 ◽  
Author(s):  
E.L. Stolyarova

Author(s):  
Kamila Gieba

The article examines ways of representing nuclear catastrophe in Kate Brown's Plutopia: Nuclear Families, Atomic Cities, and the Great Soviet and American Plutonium Disasters. In 1957 an explosion in the Mayak works - a plutonium production site - led to massive contamination of the surrounding areas. The event remained a closely kept secret till 1992, absent from the public sphere and cultural texts, despite the fact that the scale of contamination was as big as the Chernobyl explosion. One of the reasons for this was the difficulty of representing nuclear radiation. The author focuses on three contexts of this impossibility: in relation to the cognitive theory of the metaphor, the figure of the sick body as bearer of memory, and the invisibility of the nuclear landscape.


Sign in / Sign up

Export Citation Format

Share Document