Data Plotting

2020 ◽  
pp. 265-285
Author(s):  
Ioana Culic ◽  
Alexandru Radovici ◽  
Cristian Rusu
Keyword(s):  
Data Plotting

Realtime Data Plotting and Visualization

2021 ◽  
pp. 161-171
Author(s):  
Richard J. Smythe
Keyword(s):  
Data Plotting

scholarly journals Hydrology of Mountain Blocks in Arizona and New Mexico as Revealed by Isotopes in Groundwater and Precipitation

Geosciences ◽  
2019 ◽  
Vol 9 (11) ◽  
pp. 461 ◽  
Author(s):  
Christopher J. Eastoe ◽  
William E. Wright
Keyword(s):  
Groundwater Age ◽  
Winter Precipitation ◽  
Precipitation Intensity ◽  
Basin And Range Province ◽  
Altitude Effect ◽  
Weighted Means ◽  
Mountain Front ◽  
Tucson Basin ◽  
Precipitation Season ◽  
Data Plotting

Mountain-block groundwater in the Southern Basin-and-Range Province shows a variety of patterns of δ18O and δ2H that indicate multiple recharge mechanisms. At 2420 m above sea level (masl) in Tucson Basin, seasonal amount-weighted means of δ18O and δ2H for summer are −8.3, −53‰, and for winter, −10.8 and −70‰, respectively. Elevation-effect coefficients for δ18O and δ2H are as follows: summer, −1.6 and −7.7 ‰ per km and winter, −1.1 and −8.9 ‰ per km. Little altitude effect exists in 25% of seasons studied. At 2420 masl, amount-weighted monthly averages of δ18O and δ2H decrease in summer but increase in winter as precipitation intensity increases. In snow-banks, δ18O and δ2H commonly plots close to the winter local meteoric water line (LMWL). Four principal patterns of (δ18O, δ2H) data have been identified: (1) data plotting along LMWLs for all precipitation at >1800 masl; (2) data plotting along modified LMWLs for the wettest 30% of months at <1700 masl; (3) evaporation trends at all elevations; (4) other patterns, including those affected by ancient groundwater. Young, tritiated groundwater predominates in studied mountain blocks. Ancient groundwater forms separate systems and mixes with young groundwater. Recharge mechanisms reflect a complex interplay of precipitation season, altitude, precipitation intensity, groundwater age and geology. Tucson Basin alluvium receives mountain-front recharge containing 50%–90% winter precipitation.

Data plotting of warfarin binding to human serum albumin

2001 ◽  
Vol 48 (1) ◽  
pp. 33-41 ◽  
Author(s):  
Juan Pablo Villamor ◽  
Ana Marı́a Lourdes Zatón
Keyword(s):  
Human Serum Albumin ◽  
Serum Albumin ◽  
Human Serum ◽  
Data Plotting

GeoPlot: An Excel VBA program for geochemical data plotting

2006 ◽  
Vol 32 (4) ◽  
pp. 554-560 ◽  
Author(s):  
Jibin Zhou ◽  
Xianhua Li
Keyword(s):  
Geochemical Data ◽  
Data Plotting

scholarly journals A CURE for physiological characterization of bacterioplankton in liquid culture

2020 ◽  
Author(s):  
V. Celeste Lanclos ◽  
Jordan T. Coelho ◽  
Alex J. Hyer ◽  
Mindy M. Brooks ◽  
Emily R. Savoie ◽  
...  
Keyword(s):  
Undergraduate Research ◽  
Model Organisms ◽  
Research Experience ◽  
Ecological Distribution ◽  
Physiological Characterization ◽  
Carbon Substrates ◽  
Bacterial Characterization ◽  
Data Plotting ◽  
Environmental Functions

ABSTRACTBacterial characterization is an important aspect of microbiology that includes experimentally determining growth rates, environmental conditions conducive to growth, and the types of energy sources microorganisms can use. Researchers use this information to help understand and predict an organism’s ecological distribution and environmental functions. Microbiology students generally conduct bacterial characterization experiments in their coursework; however they are frequently restricted to model organisms without ecological relevance and for which the results have been known for decades. We present a course-based undergraduate research experience (CURE) curriculum to involve students in characterization of previously untested, ecologically relevant bacterioplankton cultures to identify the carbon substrates used for growth, as well as the temperature and salinity ranges conducive to growth. Students use these results to connect their organism’s physiology to the isolation environment. This curriculum also exposes students to advanced microbiology methods such as flow cytometry for measuring cell concentrations, teaches them to use the programming language R for data plotting, and emphasizes scientific communication through writing, speaking, poster creation/presentation, and social media. This CURE is an attractive introduction to scientific research and was successfully tested with 147 students during the fall semester of 2018.

scholarly journals Desain Pintu Air Berbantu Komputer Untuk Saluran Irigasi Tersier di Daerah Irigasi Cikarawang Bogor

2021 ◽  
Vol 5 (3) ◽  
pp. 137-152
Author(s):  
Eka Sulaecha ◽  
Budi Indra Setiawan
Keyword(s):  
Irrigation Water ◽  
Effective Rainfall ◽  
Computer Design ◽  
Irrigation Water Demand ◽  
Gate Opening ◽  
Water Gate ◽  
Computer Aided ◽  
Using Data ◽  
The Cost ◽  
Data Plotting

Irrigation water gate was one of the supporting components of agricultural activities, especially the management of rice fields, because it was utilized in the management of water flow. The implementation of water gate has a complex and interdependent set of tasks. So that was the problem which can made undesired effects. So that, the planning can be shorted by computer design . Besides, the changes in a design could be overcome quickly and precisely. The purpose of this research is to the effective rainfall, evapotranspiration, discharge of irrigation water needs in the Cikarawang irrigation area, produce a design of computer-aided water gate, and know RAB for the construction of the water gate. The study was conducted from April to July 2020. The place to do the research was Cikarawang Village, Bogor Regency, West Java. The results of the study were the design of water gate by using data plotting with computer-aided script files (SCR). The effective rainfall of 1806.3 mm, the highest evapotranspiration of 5.5 mm/day and the lowest evapotranspiration of plants at 4 mm/day, the highest irrigation water demand was 2.18 lt/dt/ha,  The dimensions of 0.5 x 0.75 x 0.012 m, and water gate opening 0.27 m. These water gate openings were used when the plant's water requirements are highest. The cost of making water gate made from fiberglass is Rp. 838.000,-while for steel costs Rp. 3.500.000,-.

scholarly journals Method and program for the interpolation of experimental results of determining the mechanical properties of mineral composites for modern machine–tools

2019 ◽  
Vol 299 ◽  
pp. 05009
Author(s):  
Mihai Ciupan ◽  
Marcel Popa ◽  
Emilia Ciupan
Keyword(s):  
Experimental Data ◽  
Mechanical Properties ◽  
Machine Tools ◽  
Source Code ◽  
Experimental Results ◽  
Independent Variables ◽  
Input And Output ◽  
Matlab Program ◽  
Modern Machine ◽  
Data Plotting

The paper presents a method of interpolating bifactorial experimental data with the aim of extending the results over the entire domain defined by the independent variables. This approach can be used in determining the optimum mineral casting mixes for a given application. Mechanical properties such as stiffness, ultimate tensile strength, yield strength and Poisson's coefficient can be improved.The paper describes the implementation of a radial basis function (RBF) algorithm in a MATLAB program for the interpolation of data, plotting of the results and the identification of the maximum dependent variable and the independent variables that correspond to it. It also provides the source code for the program along with explanations regarding its use. RBF interpolations can be used successfully in response surface methodology to generate approximations of the studied variables based on the experimental results. The program can be extended to work on any number of input and output variables.

Sign in / Sign up

Export Citation Format

Share Document