Reinforced concrete beams—the ultimate limit state

1987 ◽  
pp. 85-155
Author(s):  
F. K. Kong ◽  
R. H. Evans
Keyword(s):  
Reinforced Concrete ◽  
Concrete Beams ◽  
Limit State ◽  
Reinforced Concrete Beams ◽  
Ultimate Limit State ◽  
Ultimate Limit

scholarly journals Reliability of reinforced concrete beams designed in accordance with Brazilian code NBR-6118:2014

2019 ◽  
Vol 12 (5) ◽  
pp. 1086-1125
Author(s):  
M. SCHERER ◽  
I. B. MORSCH ◽  
M. V. REAL
Keyword(s):  
Reinforced Concrete ◽  
Concrete Beams ◽  
Limit State ◽  
Design Tool ◽  
Reinforced Concrete Beams ◽  
Ultimate Limit State ◽  
Safety Level ◽  
Design Variables ◽  
Live Loads ◽  
Ultimate Limit

Abstract This paper aims to evaluate the reliability indexes of reinforced concrete beams designed in accordance with brazilian code NBR-6118:2014 in relation to the ultimate limit state of flexure. The main statistics of the resistance model are obtained through Monte Carlo simulation using ANSYS software and its probabilistic design tool. The reliability indexes are evaluated by FORM, being performed a parametric study in order to assess the influence of the main design variables on the safety level reached. It can be noticed that the reliability indexes are shown unsatisfactory in the combinations which the live loads are predominant.

scholarly journals Design of reinforced concrete beams with steel fibers in the ultimate limit state

2018 ◽  
Vol 11 (5) ◽  
pp. 997-1024
Author(s):  
T. E. T. BUTTIGNOL ◽  
J. F. FERNANDES ◽  
T. N. BITTENCOURT ◽  
J. L. A. O. SOUSA
Keyword(s):  
Reinforced Concrete ◽  
Concrete Beams ◽  
Limit State ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Experimental Results ◽  
Reinforced Concrete Beams ◽  
Ultimate Limit State ◽  
Bending Tests

Abstract This paper carries out a design analysis of reinforced concrete beams with steel fibers following the fib Model Code 2010 (MC 2010) procedures. The values obtained from the design calculations are compared with the experimental results of reinforced concrete beams with 20kg/m3 and 60 kg/m3 of steel fibers submitted to four-point bending tests. In the first part, the procedures for the classification and characterization of the material are explained. The experimental results of three-point bending tests performed on notched steel fiber reinforced concrete (FRC) beams following EN 14651 procedures are described. Moreover, the characterization of the FRC beams according to MC 2010, are carried out. In the second part, the flexural design of reinforced concrete beams with steel fibers, according to MC 2010, is carried out. A sectional analysis is performed in order to obtain the moment-curvature and the force-vertical displacement curves. The theoretical values are compared with the experimental results. Besides, a linear statistic analysis by means of the Rule of Mixture is carried out in order to analyze the variation of the flexural capacity of the reinforced beams with different amounts of steel fibers. The results demonstrated that the design rules described in the MC 2010 are on the safe side. The flexural resistance of concretes with different amounts of fiber incorporation can be determined by the Rule of Mixture, which has shown a high correlation factor (R2) with the experimental values.

Combined Reinforced Concrete Columns Strengthening with Steel Clipping and Concrete Surfacing

2021 ◽  
pp. 11-22
Author(s):  
Ю. Г. Москалькова ◽  
С. В. Данилов ◽  
В. А. Ржевуцкая
Keyword(s):  
Reinforced Concrete ◽  
Load Transfer ◽  
Limit State ◽  
Concrete Columns ◽  
Ultimate Limit State ◽  
Concrete Core ◽  
Reinforced Concrete Columns ◽  
Entire Height ◽  
Complex Structural ◽  
Ultimate Limit

Постановка задачи. Исследуется метод усиления железобетонных колонн устройством стальной обоймы с обетонированием, который позволяет восстанавливать эксплуатационные показатели колонн, имеющих значительные дефекты и повреждения. Предпосылкой настоящих исследований явилось предположение о том, что усиление стальной обоймой с обетонированием является эффективным способом повышения несущей способности железобетонных колонн, причем вариант приложения нагрузки - только на бетонное ядро или ко всему сечению - существенно на эффективность усиления не влияет. В связи с этим целью исследования является определение необходимости устройства стального оголовка и включения в работу ветвей стальной обоймы при условии обетонирования стержня колонны по всей высоте. Результаты и выводы. Рациональным признан способ передачи нагрузки только на бетонное ядро усиленных колонн, поскольку устройство оголовка стальной обоймы требует применения сложных конструктивно-технологических решений, но при этом дополнительно увеличивает несущую способность незначительно (согласно проведенным исследованиям менее чем на 10 %). Ввиду отсутствия необходимости устройства конструкций стального оголовка снижаются трудоемкость и сроки производства работ по усилению колонн. Statement of the problem. The method of strengthening reinforced concrete columns with a steel clipping and the concrete surfacing is investigated. This method allows one to repair the columns with significant defects and damage. The prerequisite for this study was the assumption of strengthening with a steel clipping and the concrete surfacing is an effective way to increase the ultimate limit state of reinforced concrete columns, furthermore, the option of applying the load (only to the concrete core or to the entire section) does not significantly affect the strengthening effectiveness. In this regard, the purpose of the investigation was to identify the need to include the steel jacketing in the work, on the condition the column is coated with concrete along with the entire height. Results and conclusions. The load transfer method only to the concrete core of the strengthened columns is recognized as rational since the device of the steel clipping head requires the use of complex structural and technological solutions, but at the same time additionally increases the ultimate limit state insignificantly (according to the studies by less than 10 %). Due to the absence of the need to establish structures of the steel jacketing head, the labor intensiveness and terms of work production on strengthening the columns are reduced.

Reliability of reinforced concrete beams in serviceability limit state via microprestress-solidification theory, a structural health monitoring strategy

2022 ◽  
pp. 146442072110690
Author(s):  
Mohsen Ghabdian ◽  
Seyed BB Aval ◽  
Mohammad Noori ◽  
Wael A Altabey
Keyword(s):  
Reinforced Concrete ◽  
High Temperature ◽  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Concrete Beams ◽  
Limit State ◽  
Reinforced Concrete Beams ◽  
Nonlinear Creep ◽  
Structural Health ◽  
Serviceability Limit State

An important and critical area within the broad domain of structural health monitoring, as related to reinforced civil and mechanical structures, is the assessment of creep, shrinkage, and high-temperature effects on reliability and serviceability. Unfortunately, the monitoring and impact of these inherent mechanical characteristics and behaviors, and subsequent impact on serviceability, have rarely been considered in the literature in structural health monitoring. In this paper, the microprestress-solidification creep theory for beams is generalized for the simultaneous effect of linear/nonlinear creep, shrinkage, and high temperature in a reliability framework. This study conducts a systematic time-dependent procedure for the reliability analysis of structures using a powerful nanoscale method. It must be noted that this paper aims to extend the previously developed microprestress-solidification method in a health monitoring reliability-based framework with a close look at a nonlinear creep, parameters affecting creep, and long-time high temperature. A finite element approach is proposed where creep, shrinkage, temperature, and cracking are considered using strain splitting theory. First, the model performance was evaluated by comparing the results with the experimental test available in the literature in the case of creep and shrinkage. Then, the simultaneous effect of creep, shrinkage, and temperature was compared with experimental results obtained by the authors. Reliability analysis was applied to reinforced concrete beams subjected to sustained gravity loading and uniform temperature history in order to calculate exceedance probability in the serviceability limit state. It was found that the exceedance probability of reinforced concrete beams was dependent on the shear span-to-depth ratio. In the serviceability limit state, exceedance probabilities of 0.012 and 0.157 were calculated for the span-to-depth ratios of 1 and 5, respectively. In addition, it was shown that temperature plays an important role in the reliability of reinforced concrete beams. A 4.27-fold increase was observed in the case of moderate to high temperature. Finally, for three different load levels of 40%, 70%, and 80%, the exceedance probabilities were 0.156, 0.328, and 0.527, respectively, suggesting that load level is another key parameter affecting the reliability of reinforced concrete beams. It is thus concluded these fundamental phenomenological studies should be further considered as part of the broad field of structural health monitoring.

scholarly journals ON DESIGN FEATURES OF PROPPED AND UNPROPPED HYPERSTATIC STRUCTURES

2007 ◽  
Vol 13 (2) ◽  
pp. 123-129 ◽  
Author(s):  
Algirdas Kudzys ◽  
Romualdas Kliukas ◽  
Antanas Kudzys
Keyword(s):  
Reinforced Concrete ◽  
Design Methodology ◽  
Extreme Values ◽  
Limit State ◽  
Ultimate Limit State ◽  
Term Survival ◽  
Partial Factor ◽  
Ultimate Limit ◽  
Composite Steel

An effect of structural and technological features on the design methodology of hyperstatic precast reinforced concrete and composite steel‐concrete structures is discussed. Permanent and variable service, snow and wind loads of buildings and their extreme values are analysed. Two loading cases of precast reinforced concrete and composite steel‐concrete continuous and sway frame beams as propped and unpropped members are considered. A redistribution of bending moments for the ultimate limit state of beams is investigated. A limit state verification of hyperstatic beams by the partial factor and probability‐based methods is presented. It is recommended to calculate a long‐term survival probability of beams by the analytical method of transformed conditional probabilities.

scholarly journals METHODS FOR CALCULATING RECTANGULAR SECTION BEAMS MADE OF WOOD AND CONCRETE

2021 ◽  
pp. 1-5
Author(s):  
Ksenia Olegovna Dubrakova ◽  
Viacheslav Aseev ◽  
Aleksey Bulgakov
Keyword(s):  
Comparative Analysis ◽  
Concrete Beam ◽  
Concrete Beams ◽  
Rectangular Cross Section ◽  
Limit State ◽  
Experimental Studies ◽  
Ultimate Limit State ◽  
Numerical Comparison ◽  
Building Structures ◽  
Ultimate Limit

The research aimed to study methods for calculating wood-concrete beams of rectangular cross-section when testing building structures according to the ultimate limit state. The article focuses on the comparison of theoretical methods for calculating structures and considers several methods of fastening the samples of a typical wood-concrete beam. There were obtained experimental data of the ultimate limit state for each sample and carried out a comparative analysis of the most advantageous scheme of fastening the sample parts. The scientific novelty is in the development of an algorithm for calculating composite wood-concrete beams of rectangular cross-sections. As a result, numerical comparison of the values for calculating a typical wood-concrete beam using two of the methods under consideration was given, experimental studies were carried out, as well as a comparative analysis of the obtained theoretical and experimental results.

Sign in / Sign up

Export Citation Format

Share Document