Shape Memory Alloy Linear Actuators for Tendon-based Biomorphic Actuating Systems

Author(s):  
M. Bergamasco ◽  
F. Salsedo ◽  
P. Dario
2015 ◽  
Vol 137 (1) ◽  
Author(s):  
Jeremy Kolansky ◽  
Pablo Tarazaga ◽  
O. John Ohanian,

Shape memory alloys (SMAs) are capable linear actuators. This research demonstrates the capabilities of SMA wires for the control of a pivot actuator. The wires impart opposing forces to control the motion of the pivot, and their deformation lengths are used to control the angle of rotation. The performance of the actuator is demonstrated through the tracking of a trajectory. Several effects that are important to the behavior of the actuator are also investigated. These are the block force generation of SMA wires for various temperatures and cooling strategies, and the open-loop response of the system.


2016 ◽  
Vol 28 (13) ◽  
pp. 1699-1718 ◽  
Author(s):  
Jaronie Mohd Jani ◽  
Martin Leary ◽  
Aleksandar Subic

2021 ◽  
Vol 3 (4) ◽  
Author(s):  
Deep Singh ◽  
Rutupurna Choudhury ◽  
Yogesh Singh ◽  
Manidipto Mukherjee

AbstractThe applications of lightweight planar parallel robotic manipulators are increasing enormously because of its various desirable characteristics such as low weight, lower inertia and higher stiffness. Higher accelerations and accuracies can be achieved in planar parallel manipulators. Also, shape memory alloy restoration technique (SMART)-based linear actuators are replacing huge and bulky linear actuators. This study presents the kinematic design of smart linearly actuated family of U-shape base planar parallel robotic manipulator. With the aid of solid modelling software, different available configurations were modelled and their workspace was analysed. The developed 3-DOF motion stages (18 unique configurations) were fabricated using fused deposition modelling process, and the top three configurations having higher workspace were further experimented. It is interesting to observe that the actual or experimental workspace of a particular manipulator configuration is further minimised from the predicted or feasible workspace. It is due to the presence of passive links, singularities, friction between the parts, heat dissipation, force distribution, stiffness, etc. The present study depicts the experimental workspace of the top three configurations, namely PPR-PRP-PRR, PRP-PPR-PRP and PRP-PPR-PRR. Since none of the experimental workspace observed is equal or higher than the model workspace, an efficiency loss in terms of workspace reduction was calculated to understand the acceptability of the configurations in different domains. Apart from the loss, the result disclosed that the actual workspace of all the manipulators was within the feasible workspace domain of mobile platform. The PPR-PRP-PRR manipulator was found to possess highest experimental workspace than other configurations. Note: P, P, and R refer to active prismatic, passive prismatic and passive revolute joints respectively.


2003 ◽  
Vol 112 ◽  
pp. 519-522 ◽  
Author(s):  
W. Cai ◽  
J. X. Zhang ◽  
Y. F. Zheng ◽  
L. C. Zhao

Sign in / Sign up

Export Citation Format

Share Document