Experimental Study on Airfoil Noise Reduction with Trailing Edge Serrations Under Various Incoming Flow Conditions

2015 ◽  
pp. 51-56
Author(s):  
F. Tong ◽  
X. N. Wang ◽  
L. F. Wang ◽  
W. Y. Qiao
Keyword(s):  
Experimental Study ◽  
Noise Reduction ◽  
Incoming Flow ◽  
Flow Conditions ◽  
Trailing Edge ◽  
Trailing Edge Serrations

Experimental study of wavy trailing edge serrations on flat rotor blades

2021 ◽  
Vol 263 (5) ◽  
pp. 1855-1866
Author(s):  
Sai Manikanta Kaja ◽  
K. Sriinivasan ◽  
A. Jaswanth Kalyan Kumar
Keyword(s):  
Experimental Study ◽  
Noise Reduction ◽  
Pitch Angle ◽  
Acoustic Emissions ◽  
Broadband Noise ◽  
Rotor Blades ◽  
Tonal Noise ◽  
Trailing Edge ◽  
Low Speeds ◽  
Trailing Edge Serrations

A detailed experimental study is conducted to observe the effect of various parameters like wavelength, depth of serrations, and pitch angle on serrated blades' acoustic emissions at low speeds up to 2000 rpm. Experiments are conducted on flat blade rotors with sinusoidal serrations on the trailing edge of blades with different amplitudes and wavelengths. A total of 7 blades with different serration configurations, including a base configuration, are studied, five of them have serrations throughout the span of the blade, and one configuration has serration of varying amplitude on the farther half of the blade. It is observed that some blade configurations have resulted in tonal noise reduction noise as much as 8dB, whereas some of the serration configurations reduce very little to none, there is no significant effect of T.E serrations on the broadband noise emitted by the rotor. Directivity of noise generated from the rotor, the effect of serrations on the directivity of the noise is studied.

Numerical study on the airfoil self-noise of three owl-based wings with the trailing-edge serrations

2021 ◽  
pp. 095441002098822
Author(s):  
Dian Li ◽  
Xiaomin Liu ◽  
Lei Wang ◽  
Fujia Hu ◽  
Guang Xi
Keyword(s):  
Flow Field ◽  
Noise Reduction ◽  
Numerical Study ◽  
Barn Owl ◽  
Aerodynamic Noise ◽  
Frequency Noise ◽  
Trailing Edge ◽  
Reduction Mechanisms ◽  
Trailing Edge Serrations ◽  
Bionic Airfoil

Previous publications have summarized that three special morphological structures of owl wing could reduce aerodynamic noise under low Reynolds number flows effectively. However, the coupling noise-reduction mechanism of bionic airfoil with trailing-edge serrations is poorly understood. Furthermore, while the bionic airfoil extracted from natural owl wing shows remarkable noise-reduction characteristics, the shape of the owl-based airfoils reconstructed by different researchers has some differences, which leads to diversity in the potential noise-reduction mechanisms. In this article, three kinds of owl-based airfoils with trailing-edge serrations are investigated to reveal the potential noise-reduction mechanisms, and a clean airfoil based on barn owl is utilized as a reference to make a comparison. The instantaneous flow field and sound field around the three-dimensional serrated airfoils are simulated by using incompressible large eddy simulation coupled with the FW-H equation. The results of unsteady flow field show that the flow field of Owl B exhibits stronger and wider-scale turbulent velocity fluctuation than that of other airfoils, which may be the potential reason for the greater noise generation of Owl B. The scale and magnitude of alternating mean convective velocity distribution dominates the noise-reduction effect of trailing-edge serrations. The noise-reduction characteristic of Owl C outperforms that of Barn owl, which suggests that the trailing-edge serrations can suppress vortex shedding noise of flow field effectively. The trailing-edge serrations mainly suppress the low-frequency noise of the airfoil. The trailing-edge serration can suppress turbulent noise by weakening pressure fluctuation.

Effect of trailing-edge serrations on noise reduction in a coupled bionic aerofoil inspired by barn owls

2019 ◽  
Vol 15 (1) ◽  
pp. 016009
Author(s):  
Dian Li ◽  
Xiaomin Liu ◽  
Fujia Hu ◽  
Lei Wang
Keyword(s):  
Noise Reduction ◽  
Trailing Edge ◽  
Barn Owls ◽  
Trailing Edge Serrations

scholarly journals Numerical study of 3-D finlets using Reynolds-averaged Navier–Stokes computational fluid dynamics for trailing edge noise reduction

2020 ◽  
Vol 19 (1-2) ◽  
pp. 95-118 ◽  
Author(s):  
Yuejun Shi ◽  
Seongkyu Lee
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Noise Reduction ◽  
Physical Mechanism ◽  
Navier Stokes ◽  
Flow Conditions ◽  
Trailing Edge ◽  
Trailing Edge Noise ◽  
Reynolds Averaged Navier Stokes ◽  
Spectrum Model

This paper uses Reynolds-averaged Navier–Stokes computational fluid dynamics to study trailing edge noise reduction with 3-D finlets. Reynolds-averaged Navier–Stokes computational fluid dynamics provides boundary layer parameters near a trailing edge for an empirical wall pressure spectrum model, and then an acoustic model predicts far-field noise based on pressure fluctuations obtained from the wall pressure spectrum model. First, this numerical approach is validated against experiments. Second, a comprehensive trend analysis is conducted to give insight into the design of 3-D finlets under different flow conditions. A data-driven turbulence spanwise length scale model is developed to tackle finlets with small spacing. Combined with acoustic results, detailed computational flow field results are analyzed to understand the physical mechanism of noise reduction. While the major part of the proposed mechanism is the same as prior work, several new observations are shown which better understand the physical mechanism of noise reduction with 3-D finlets. The goals of the current paper are to provide an efficient Reynolds-averaged Navier–Stokes-based approach to predict trailing edge noise of 3-D finlets, to give complete trend analysis results with various finlets under different flow conditions, and to advance an understanding of the underlying physics.

Sign in / Sign up

Export Citation Format

Share Document