Experimental study of wavy trailing edge serrations on flat rotor blades

2021 ◽  
Vol 263 (5) ◽  
pp. 1855-1866
Author(s):  
Sai Manikanta Kaja ◽  
K. Sriinivasan ◽  
A. Jaswanth Kalyan Kumar
Keyword(s):  
Experimental Study ◽  
Noise Reduction ◽  
Pitch Angle ◽  
Acoustic Emissions ◽  
Broadband Noise ◽  
Rotor Blades ◽  
Tonal Noise ◽  
Trailing Edge ◽  
Low Speeds ◽  
Trailing Edge Serrations

A detailed experimental study is conducted to observe the effect of various parameters like wavelength, depth of serrations, and pitch angle on serrated blades' acoustic emissions at low speeds up to 2000 rpm. Experiments are conducted on flat blade rotors with sinusoidal serrations on the trailing edge of blades with different amplitudes and wavelengths. A total of 7 blades with different serration configurations, including a base configuration, are studied, five of them have serrations throughout the span of the blade, and one configuration has serration of varying amplitude on the farther half of the blade. It is observed that some blade configurations have resulted in tonal noise reduction noise as much as 8dB, whereas some of the serration configurations reduce very little to none, there is no significant effect of T.E serrations on the broadband noise emitted by the rotor. Directivity of noise generated from the rotor, the effect of serrations on the directivity of the noise is studied.

scholarly journals Optimization of Trailing-Edge Serrations to Reduce Open-Rotor Tonal Interaction Noise

2017 ◽  
Vol 140 (2) ◽  
Author(s):  
Robert Jaron ◽  
Antoine Moreau ◽  
Sébastien Guérin ◽  
Rainer Schnell
Keyword(s):  
Steady State ◽  
Noise Reduction ◽  
Hybrid Approach ◽  
Prediction Method ◽  
Rotor Blades ◽  
Spanwise Direction ◽  
Tonal Noise ◽  
Trailing Edge ◽  
Open Rotor ◽  
Trailing Edge Serrations

A major source of contra-rotating open rotor (CROR) tonal noise is caused by the interaction of the front-rotor (FR) wakes with the aft-rotor blades. Inspired by chevron nozzles, which increase the mixing process in jet shear layers, serrations are implemented at the FR trailing-edge in order to increase the wake mixing and thus reduce the tones. The depth and width of the serrations are optimized with a multi-objective, metamodel-assisted evolutionary algorithm. For each member, a steady-state Reynolds-averaged Navier–Stokes (RANS) simulation is performed, which is coupled with an analytical noise prediction method in order to evaluate the noise reduction due to the serrations. The results confirm that tonal interaction noise can be reduced by means of trailing-edge serrations. It is found that the major noise reduction mechanism for wake interaction is attributed to increased destructive interferences occurring in spanwise direction. The tonal noise generated through the interaction of the rear rotor (RR) potential field with the FR trailing edge is also slightly reduced because of the circumferential and axial shift of the serrated trailing edge. Furthermore, the present study demonstrates the feasibility of performing an acoustic optimization with a hybrid approach that predicts the noise analytically and extracts the aerodynamic input data from a steady-state RANS flow solution.

Experimental Study on the Turbomachinery Trailing Edge Noise Reduction

2016 ◽  
Author(s):  
Fan Tong ◽  
Wei-Yang Qiao ◽  
Liang Ji ◽  
Kun-Bo Xu ◽  
Xun-Nian Wang
Keyword(s):  
Noise Reduction ◽  
Wide Frequency Range ◽  
Broadband Noise ◽  
Special Focus ◽  
Turbine Cascade ◽  
Frequency Range ◽  
Trailing Edge ◽  
Trailing Edge Noise ◽  
Reduction Effect ◽  
Trailing Edge Serrations

This paper is a continuation of a series of study on the mechanism of the broadband noise reduction for turbomachinery blade using trailing edge serrations. The noise reduction potential of turbine blade with trailing edge serrations is experimentally assessed as well as the various parameters on the noise reduction effect. Special focus is put on whether the trailing edge serrations affect turbine cascade tailing edge noise in the same way as they do on the isolated airfoil. Five different trailing edge serrations were designed for a turbine linear cascade to investigate the effects of serration geometry parameter on the noise reduction. A linear microphone array was used to quantify the difference of sound source levels of turbine cascade with and without trailing edge modifications. The experiment was carried out at various velocities and the Reynolds number (based on cascade inlet velocity and chord) ranges from 1.3×105 to 3.3×105. The experiment results show that trailing edge serrations can reduce turbine trailing edge noise in a wide frequency range that we are interested (from 1600Hz to 10000Hz) and a maximum noise reduction of about 5dB is obtained in the mid frequency range (2000Hz to 4000Hz). The results show that the serration length has an important effect on the noise reduction effect and the longer serration in the experiment lead to more noise reduction. However, serration wavelength has only a little effect on the noise reduction although the wider trailing edge serrations tested in the experiment can achieve slightly more noise reduction. This is quite different from that for airfoils. At all the velocities tested, the cascade trailing edge noise is effectively reduced and the maximum noise reduction occurs at St=2fh/U≈1.

Numerical study on the airfoil self-noise of three owl-based wings with the trailing-edge serrations

2021 ◽  
pp. 095441002098822
Author(s):  
Dian Li ◽  
Xiaomin Liu ◽  
Lei Wang ◽  
Fujia Hu ◽  
Guang Xi
Keyword(s):  
Flow Field ◽  
Noise Reduction ◽  
Numerical Study ◽  
Barn Owl ◽  
Aerodynamic Noise ◽  
Frequency Noise ◽  
Trailing Edge ◽  
Reduction Mechanisms ◽  
Trailing Edge Serrations ◽  
Bionic Airfoil

Previous publications have summarized that three special morphological structures of owl wing could reduce aerodynamic noise under low Reynolds number flows effectively. However, the coupling noise-reduction mechanism of bionic airfoil with trailing-edge serrations is poorly understood. Furthermore, while the bionic airfoil extracted from natural owl wing shows remarkable noise-reduction characteristics, the shape of the owl-based airfoils reconstructed by different researchers has some differences, which leads to diversity in the potential noise-reduction mechanisms. In this article, three kinds of owl-based airfoils with trailing-edge serrations are investigated to reveal the potential noise-reduction mechanisms, and a clean airfoil based on barn owl is utilized as a reference to make a comparison. The instantaneous flow field and sound field around the three-dimensional serrated airfoils are simulated by using incompressible large eddy simulation coupled with the FW-H equation. The results of unsteady flow field show that the flow field of Owl B exhibits stronger and wider-scale turbulent velocity fluctuation than that of other airfoils, which may be the potential reason for the greater noise generation of Owl B. The scale and magnitude of alternating mean convective velocity distribution dominates the noise-reduction effect of trailing-edge serrations. The noise-reduction characteristic of Owl C outperforms that of Barn owl, which suggests that the trailing-edge serrations can suppress vortex shedding noise of flow field effectively. The trailing-edge serrations mainly suppress the low-frequency noise of the airfoil. The trailing-edge serration can suppress turbulent noise by weakening pressure fluctuation.

Sign in / Sign up

Export Citation Format

Share Document