A Modified L-Slot Microstrip Antenna with Chamfered Patch Edges for UWB Applications

2017 ◽  
pp. 33-42
Author(s):  
G. Jemima Nissiyah ◽  
M. Ganesh Madhan
Keyword(s):  
Microstrip Antenna ◽  
Uwb Applications

A Microstrip Antenna for UWB Applications

2021 ◽  
Author(s):  
Mengyu Wang ◽  
Jun Xiao ◽  
Tongyu Ding
Keyword(s):  
Microstrip Antenna ◽  
Uwb Applications

scholarly journals A Circular Disc Microstrip Antenna with Dual Notch Band for GSM/Bluetooth and Extended UWB Applications

2018 ◽  
Vol 7 (2.16) ◽  
pp. 11
Author(s):  
Sanjeev Kumar ◽  
Ravi Kumar ◽  
Rajesh Kumar Vishwakarma
Keyword(s):  
Radiation Pattern ◽  
Microstrip Antenna ◽  
Ground Plane ◽  
Circular Disc ◽  
Ultra Wideband ◽  
Resonant Circuit ◽  
Frequency Range ◽  
Notch Band ◽  
Uwb Applications ◽  
Ku Band

A microstrip antenna with a circular disc design and modified ground is proposed in this paper. Circular shapes of different size have been slotted out from the radiating patch for achieving extended ultra wideband (UWB) with GSM/Bluetooth bands with maximum bandwidth of 17.7 GHz (0.88-18.6 GHz). Further, characteristic of dual notch band is achieved, when a combination of T and L-shaped slots are etched into the circular disc and ground plane respectively. Change in length of slots is controlling the notch band characteristics. The proposed antenna has rejection bandwidth of 1.3-2.2 GHz (LTE band), 3.2-3.9 GHz (WiMAX band) and 5.2-6.1 GHz (WLAN band) respectively. It covers the frequency range of 0.88-18.5 GHz with the VSWR of less than 2. Also, an equivalent parallel resonant circuit has been demonstrated for band notched frequencies of the designed antenna. The gain achieved by the proposed antenna is 6.27 dBi. This antenna has been designed, investigated and fabricated for GSM, Bluetooth, UWB, X and Ku band applications. The stable gain including H & E-plane radiation pattern with good directivity and omnidirectional behavior is achieved by the proposed antenna. Measured bandwidths are 0.5 GHz, 0.8 GHz, 1.1 GHz and 11.7 GHz respectively. 

Microstrip antenna design for UWB applications

2016 ◽  
Author(s):  
Moh'd Ghaith Al-Halawani ◽  
Mohammed Al-Najjar ◽  
Mohamed K. Abdelazeez
Keyword(s):  
Microstrip Antenna ◽  
Antenna Design ◽  
Uwb Applications

scholarly journals Efficient Microstrip Antenna system using Reduced GP Structure for Ultra-Wide Band (UWB) Applications

YMER Digital ◽  
2021 ◽  
Vol 20 (12) ◽  
pp. 790-807
Author(s):  
N Parthiban ◽  
◽  
M Mohamed Ismail ◽  
Keyword(s):  
Frequency Band ◽  
Antenna Arrays ◽  
Patch Antenna ◽  
Microstrip Antenna ◽  
Wide Band ◽  
Antenna System ◽  
Microstrip Patch Antenna ◽  
Ultra Wide Band ◽  
Microstrip Patch ◽  
Uwb Applications

Microstrip antenna is an essential choice for Ultra Wide Band (UWB) applications of its light weight, low profile and easy to form antenna arrays. However, the design of microstrip patch antenna bandwidth is greatly affects by the dielectric substrate material (FR4). In this research, the bandwidth enhancement of MPA was designed by minimizing the dimension of Defected GP (DGP) in GP for Ultra Wide Band wireless applications. But, the antenna design complexity increases with the number of an operating frequency band. In this research, the MPA was designed as small as size of 10×13×1.6 mm and operates on frequency band between 3.1GHz to 10.6GHz for VSWR less than 2. The microstrip patch antenna was designed at 3.1GHz to 10.6GHz using High-Frequency Structure Simulator (HFSS) software. The simulation result shows that the proposed microstrip patch antenna obtained <-10dB of return loss from 3.1GHz to 10.6GHz throughout the frequency range. The measured result proves that the proposed microstrip patch antenna has better characteristics to fulfill the requirements of UWB applications

Sign in / Sign up

Export Citation Format

Share Document