De-noising for Low Signal to Noise Ratio Surface Microseismic with Wavelet Transform on Gas Shale Hydrofracture

2020 ◽  
pp. 745-753
Author(s):  
Qingming Xie ◽  
Hong Liu ◽  
Hong Xu ◽  
Lichuan Chen ◽  
Bolin Chen ◽  
...  
Keyword(s):  
Wavelet Transform ◽  
Signal To Noise Ratio ◽  
Gas Shale ◽  
Signal To Noise ◽  
Noise Ratio

Singular Values Decomposition and Lifting Wavelet Transform for Speech Signal Embedding into Digital Image

2019 ◽  
Vol 12 (2) ◽  
pp. 138-151
Author(s):  
Mourad Talbi ◽  
Med Salim Bouhlel
Keyword(s):  
Wavelet Transform ◽  
Speech Signal ◽  
Signal To Noise Ratio ◽  
Perceptual Quality ◽  
Lifting Wavelet Transform ◽  
Signal To Noise ◽  
Perceptual Evaluation ◽  
Lifting Wavelet ◽  
Noise Ratio

Background: In this paper, we propose a secure image watermarking technique which is applied to grayscale and color images. It consists in applying the SVD (Singular Value Decomposition) in the Lifting Wavelet Transform domain for embedding a speech image (the watermark) into the host image. Methods: It also uses signature in the embedding and extraction steps. Its performance is justified by the computation of PSNR (Pick Signal to Noise Ratio), SSIM (Structural Similarity), SNR (Signal to Noise Ratio), SegSNR (Segmental SNR) and PESQ (Perceptual Evaluation Speech Quality). Results: The PSNR and SSIM are used for evaluating the perceptual quality of the watermarked image compared to the original image. The SNR, SegSNR and PESQ are used for evaluating the perceptual quality of the reconstructed or extracted speech signal compared to the original speech signal. Conclusion: The Results obtained from computation of PSNR, SSIM, SNR, SegSNR and PESQ show the performance of the proposed technique.

scholarly journals An Image Steganography Algorithm using Fractional Discrete Wavelet Transform with Advanced Encryption System

2020 ◽  
Vol 9 (5) ◽  
pp. 541-546
Keyword(s):  
Wavelet Transform ◽  
Discrete Wavelet Transform ◽  
Mean Square Error ◽  
Signal To Noise Ratio ◽  
Image Steganography ◽  
Discrete Wavelet ◽  
Mean Square ◽  
Signal To Noise ◽  
Noise Ratio

The research constitutes a distinctive technique of steganography of image. The procedure used for the study is Fractional Random Wavelet Transform (FRWT). The contrast between wavelet transform and the aforementioned FRWT is that it comprises of all the benefits and features of the wavelet transform but with additional highlights like randomness and partial fractional value put up into it. As a consequence of the fractional value and the randomness, the algorithm will give power and a rise in the surveillance layers for steganography. The stegano image will be acquired after administrating the algorithm which contains not only the coated image but also the concealed image. Despite the overlapping of two images, any diminution in the grade of the image is not perceived. Through this steganographic process, we endeavor for expansion in surveillance and magnitude as well. After running the algorithm, various variables like Mean Square Error (MSE) and Peak Signal to Noise ratio (PSNR) are deliberated. Through the intended algorithm, a rise in the power and imperceptibility is perceived and it can also support diverse modification such as scaling, translation and rotation with algorithms which previously prevailed. The irrefutable outcome demonstrated that the algorithm which is being suggested is indeed efficacious.

Signal to Noise Ratio Enhancement Using Empirical Wavelet Transform

2019 ◽  
Author(s):  
Wei Yi Lee ◽  
Rosita Hamidi ◽  
Deva Ghosh ◽  
Mohd Hafiz Musa
Keyword(s):  
Wavelet Transform ◽  
Signal To Noise Ratio ◽  
Signal To Noise ◽  
Empirical Wavelet Transform ◽  
Noise Ratio

scholarly journals Fast Compressed Sensing MRI Based on Complex Double-Density Dual-Tree Discrete Wavelet Transform

2017 ◽  
Vol 2017 ◽  
pp. 1-13
Author(s):  
Shanshan Chen ◽  
Bensheng Qiu ◽  
Feng Zhao ◽  
Chao Li ◽  
Hongwei Du
Keyword(s):  
Wavelet Transform ◽  
Compressed Sensing ◽  
Discrete Wavelet Transform ◽  
Signal To Noise Ratio ◽  
Similarity Index ◽  
Discrete Wavelet ◽  
Translation Invariance ◽  
Signal To Noise ◽  
Reconstruction Methods ◽  
Noise Ratio

Compressed sensing (CS) has been applied to accelerate magnetic resonance imaging (MRI) for many years. Due to the lack of translation invariance of the wavelet basis, undersampled MRI reconstruction based on discrete wavelet transform may result in serious artifacts. In this paper, we propose a CS-based reconstruction scheme, which combines complex double-density dual-tree discrete wavelet transform (CDDDT-DWT) with fast iterative shrinkage/soft thresholding algorithm (FISTA) to efficiently reduce such visual artifacts. The CDDDT-DWT has the characteristics of shift invariance, high degree, and a good directional selectivity. In addition, FISTA has an excellent convergence rate, and the design of FISTA is simple. Compared with conventional CS-based reconstruction methods, the experimental results demonstrate that this novel approach achieves higher peak signal-to-noise ratio (PSNR), larger signal-to-noise ratio (SNR), better structural similarity index (SSIM), and lower relative error.

Frequency Domain Design Method of Wavelet Basis Based on Pulsar Signal

2020 ◽  
Vol 73 (6) ◽  
pp. 1223-1236
Author(s):  
Sihai You ◽  
Hongli Wang ◽  
Yiyang He ◽  
Qiang Xu ◽  
Lei Feng
Keyword(s):  
Wavelet Transform ◽  
Frequency Domain ◽  
Design Method ◽  
Signal To Noise Ratio ◽  
Frequency Domain Analysis ◽  
Time Of Arrival ◽  
Frequency Noise ◽  
Wavelet Basis ◽  
Signal To Noise ◽  
Noise Ratio

During pulsar navigation, the high-frequency noise carried by the pulsar profile signal reduces the accuracy of the pulse TOA (Time of Arrival) estimation. At present, the main method to remove signal noise by using wavelet transform is to redesign the function of the threshold and level of wavelet transform. However, the signal-to-noise ratio and other indicators of the filtered signal need to be further optimised, so a more appropriate wavelet basis needs to be designed. This paper proposes a wavelet basis design method based on frequency domain analysis to improve the denoising effect of pulsar signals. This method first analyses the pulsar contour signal in the frequency domain and then designs a Crab pulsar wavelet basis (CPn, where n represents the wavelet basis length) based on its frequency domain characteristics. In order to improve the real-time performance of the algorithm, a wavelet lifting scheme is implemented. Through simulation, this method analyses the pulsar contour signal data at home and abroad. Results show the signal-to-noise ratio can be increased by 4 dB, the mean square error is reduced by 61% and the peak error is reduced by 45%. Therefore, this method has better filtering effect.

scholarly journals DEVELOPMENT OF A SYSTEM FOR DIGITAL WATERMARKS EMBEDDING INTO IMAGES BASED ON DCT-LWT-SVD

2020 ◽  
pp. 23-31
Author(s):  
A.V. Akhmametieva ◽  
A.A. Baraniuk
Keyword(s):  
Wavelet Transform ◽  
Copyright Protection ◽  
Signal To Noise Ratio ◽  
Median Filter ◽  
Low Frequency ◽  
Digital Watermark ◽  
Signal To Noise ◽  
Actual Problem ◽  
Noise Ratio ◽  
Salt And Pepper

Copyright protection of digital content is a rather actual problem of humanity in the 21st century. Misuses of multimedia content is very common, and their number is growing with each passing day. One type of copyright protection is the embedding of digital watermark (DW) in the content. In this paper a new method of embedding digital watermark into image using discrete cosine transform, lifting wavelet transform (LWT) with maternal wavelet "Dobeshi-8" and singular coefficients decomposition is proposed. Embedding is performed into the first singular number of the low frequency wavelet transform region. As a digital watermark, we will use a grayscale image normalized to a range from zero to ten to provide a high peak signal-to-noise ratio (PSNR). The research analyzed the developed method: the method of embedding and detecting information was tested for its resistance to various types of attacks, namely: application of noise overlay (Gauss and pulse noise, "salt and pepper"), "unsharp" filter and median filter, and compression attack (with quality coefficients for a complete container from 60 to 100). As a result of the conducted testing, it was established that the method is quite resistant to all the attacks, except for the "unsharp" filtering (the resulting performance is not satisfactory). The method showed good results in peak signal-to-noise ratio - the average PSNR value is 50.5 dB, as well as high rates of similarity between the embedded DW and the extracted one - from 77% to 97.6% while saving the full container in a lossless format, and up to 53, 05 dB and 91.96% while saving the image in a lossless format (JPEG).

scholarly journals Fusion for medical image based on discrete wavelet transform coefficient

2021 ◽  
Vol 21 (3) ◽  
pp. 1407
Author(s):  
Zahraa Yaseen Hasan ◽  
Rusul Altaie ◽  
Hawraa Abd Al-kadum Hassan
Keyword(s):  
Wavelet Transform ◽  
Discrete Wavelet Transform ◽  
Signal To Noise Ratio ◽  
Wavelet Coefficient ◽  
Digital Camera ◽  
Bright Light ◽  
Discrete Wavelet ◽  
Signal To Noise ◽  
Cloudy Weather ◽  
Noise Ratio

<span id="docs-internal-guid-a16efc88-7fff-5adf-531b-900845049730"><span>More recent digital camera introduced enormous facilities for users from different specifications to take images easily, but the user still wants to improve these images, which it contains different problems like ambiguous and colors is not clear, because not enough light, cloudy weather, bright light, dark region and it's taken from remote distances. This paper aims to use a new approach for fusion images by using a wavelet coefficient based on PSNR and SNR measure (the technical result) instead of using the max, min, average values, and so on in the previous methods. The wavelet coefficient of each sub band is compared between them, the sub band had a value higher of measure is selected for fusion. Firstly, a discrete wavelet transform has been applied to the medical images with 2level. Then, the peak signal to noise ratio and signal to noise ratio measures have been computed for each sub-band. After that PSNR and SNR values have been compared for each sub-band to opposite sub-band and it selected the better value of measures. Secondly, PSNR and SNR values have been gathered for each image. Then select the image that contains value higher PSNR and lower value of SNR for purpose fusion. Finally, perform an inverse discrete wavelet on the fused image to transform it from the frequency to the spatial domain. The results of the work showed that the wavelet coefficient is used to preserve the image details and removed the noise. PSNR value of 1level of dwt is higher than 2level. This paper makes the image more clearer and informative than the original images. </span></span>

A Novel Biometric Image Enhancement Approach With the Hybridization of Undecimated Wavelet Transform and Deep Autoencoder

2020 ◽  
pp. 245-269
Author(s):  
Sasirekha K. ◽  
Thangavel K.
Keyword(s):  
Wavelet Transform ◽  
Image Enhancement ◽  
Mean Square Error ◽  
Signal To Noise Ratio ◽  
Mean Square ◽  
Signal To Noise ◽  
Undecimated Wavelet Transform ◽  
Long Time ◽  
Noise Ratio ◽  
Undecimated Wavelet

For a long time, image enhancement techniques have been widely used to improve the image quality in many image processing applications. Recently, deep learning models have been applied to image enhancement problems with great success. In the domain of biometric, fingerprint and face play a vital role to authenticate a person in the right way. Hence, the enhancement of these images significantly improves the recognition rate. In this chapter, undecimated wavelet transform (UDWT) and deep autoencoder are hydridized to enhance the quality of images. Initially, the images are decomposed with Daubechies wavelet filter. Then, deep autoencoder is trained to minimize the error between reconstructed and actual input. The experiments have been conducted on real-time fingerprint and face images collected from 150 subjects, each with 10 orientations. The signal to noise ratio (SNR), peak signal to noise ratio (PSNR), mean square error (MSE), and root mean square error (RMSE) have been computed and compared. It was observed that the proposed model produced a biometric image with high quality.

Sign in / Sign up

Export Citation Format

Share Document