Complete Creep Life Prediction Using Continuum Damage Mechanics and XFEM

2020 ◽  
pp. 169-176
Author(s):  
V. B. Pandey ◽  
I. V. Singh ◽  
B. K. Mishra
Keyword(s):  
Life Prediction ◽  
Damage Mechanics ◽  
Continuum Damage Mechanics ◽  
Continuum Damage ◽  
Creep Life ◽  
Creep Life Prediction

Creep Life Prediction of Aircraft Turbine Disc Alloy Using Continuum Damage Mechanics

2017 ◽  
Vol 38 (1) ◽  
pp. 25-30
Author(s):  
Yan-Feng Li ◽  
Zhisheng Zhang ◽  
Chenglin Zhang ◽  
Jie Zhou ◽  
Hong-Zhong Huang
Keyword(s):  
Numerical Analysis ◽  
Test Data ◽  
Life Prediction ◽  
Damage Mechanics ◽  
Continuum Damage Mechanics ◽  
Creep Model ◽  
Continuum Damage ◽  
Creep Life ◽  
Creep Life Prediction ◽  
Turbine Disc

Abstract This paper deals with the creep characteristics of the aircraft turbine disc material of nickel-base superalloy GH4169 under high temperature. From the perspective of continuum damage mechanics, a new creep life prediction model is proposed to predict the creep life of metallic materials under both uniaxial and multiaxial stress states. The creep test data of GH4169 under different loading conditions are used to demonstrate the proposed model. Moreover, from the perspective of numerical simulation, the test data with analysis results obtained by using the finite element analysis based on Graham creep model is carried out for comparison. The results show that numerical analysis results are in good agreement with experimental data. By incorporating the numerical analysis and continuum damage mechanics, it provides an effective way to accurately describe the creep damage process of GH4169.

Multixial Creep Life Prediction of Ceramic Structures Using Continuum Damage Mechanics and the Finite Element Method

1999 ◽  
Vol 121 (4) ◽  
pp. 577-585 ◽  
Author(s):  
O. M. Jadaan ◽  
L. M. Powers ◽  
J. P. Gyekenyesi
Keyword(s):  
Life Prediction ◽  
Damage Mechanics ◽  
Continuum Damage Mechanics ◽  
Creep Rupture ◽  
Continuum Damage ◽  
Creep Life ◽  
Current State ◽  
Creep Life Prediction ◽  
Uniaxial Creep ◽  
Temperature Time

High temperature and long duration applications of monolithic ceramics can place their failure mode in the creep rupture regime. A previous model advanced by the authors described a methodology by which the creep rupture life of a loaded component can be predicted. That model was based on the life fraction damage accumulation rule in association with the modified Monkman-Grant creep rupture criterion. However, that model did not take into account the deteriorating state of the material due to creep damage (e.g., cavitation) as time elapsed. In addition, the material creep parameters used in that life prediction methodology, were based on uniaxial creep curves displaying primary and secondary creep behavior, with no tertiary regime. The objective of this paper is to present a creep life prediction methodology based on a modified form of the Kachanov-Rabotnov continuum damage mechanics (CDM) theory. In this theory, the uniaxial creep rate is described in terms of stress, temperature, time, and the current state of material damage. This scalar damage state parameter is basically an abstract measure of the current state of material damage due to creep deformation. The damage rate is assumed to vary with stress, temperature, time, and the current state of damage itself. Multiaxial creep and creep rupture formulations of the CDM approach are presented in this paper. Parameter estimation methodologies based on nonlinear regression analysis are also described for both, isothermal constant stress states and anisothermal variable stress conditions. This creep life prediction methodology was preliminarily added to the integrated design code named Ceramics Analysis and Reliability Evaluation of Structures/Creep (CARES/Creep), which is a postprocessor program to commercially available finite element analysis (FEA) packages. Two examples, showing comparisons between experimental and predicted creep lives of ceramic specimens, are used to demonstrate the viability of this methodology and the CARES/Creep program.

scholarly journals Multiaxial Creep Life Prediction of Ceramic Structures Using Continuum Damage Mechanics and the Finite Element Method

1998 ◽  
Author(s):  
Osama M. Jadaan ◽  
Lynn M. Powers ◽  
John P. Gyekenyesi
Keyword(s):  
Life Prediction ◽  
Damage Mechanics ◽  
Continuum Damage Mechanics ◽  
Creep Rupture ◽  
Creep Life ◽  
Current State ◽  
Creep Life Prediction ◽  
Uniaxial Creep ◽  
Multiaxial Creep ◽  
Temperature Time

High temperature and long duration applications of monolithic ceramics can place their failure mode in the creep rupture regime. A previous model advanced by the authors described a methodology by which the creep rupture life of a loaded component can be predicted. That model was based on the life fraction damage accumulation rule in association with the modified Monkman-Grant creep rupture criterion. However, that model did not take into account the deteriorating state of the material due to creep damage (e.g., cavitation) as time elapsed. In addition, the material creep parameters used in that life prediction methodology, were based on uniaxial creep curves displaying primary and secondary creep behavior, with no tertiary regime. The objective of this paper is to present a creep life prediction methodology based on a modified form of the Kachanov-Rabotnov continuum damage mechanics (CDM) theory. In this theory, the uniaxial creep rate is described in terms of stress, temperature, time, and the current state of material damage. This scalar damage state parameter is basically an abstract measure of the current state of material damage due to creep deformation. The damage rate is assumed to vary with stress, temperature, time, and the current state of damage itself. Multiaxial creep and creep rupture formulations of the CDM approach are presented in this paper. Parameter estimation methodologies based on nonlinear regression analysis are also described for both, isothermal constant stress states and anisothermal variable stress conditions This creep life prediction methodology was preliminarily added to the integrated design code. CARES/Creep (Ceramics Analysis and Reliability Evaluation of Structures/Creep), which is a postprocessor program to commercially available finite element analysis (FEA) packages. Two examples, showing comparisons between experimental and predicted creep lives of ceramic specimens, are used to demonstrate the viability of this methodology and the CARES/Creep program.

scholarly journals A Review on Fatigue Life Prediction Methods for Metals

2016 ◽  
Vol 2016 ◽  
pp. 1-26 ◽  
Author(s):  
E. Santecchia ◽  
A. M. S. Hamouda ◽  
F. Musharavati ◽  
E. Zalnezhad ◽  
M. Cabibbo ◽  
...  
Keyword(s):  
Fatigue Life ◽  
Prediction Model ◽  
Life Prediction ◽  
Damage Mechanics ◽  
Continuum Damage Mechanics ◽  
Fatigue Life Prediction ◽  
Continuum Damage ◽  
Metallic Materials ◽  
Variable Amplitude Loading ◽  
Variable Amplitude

Metallic materials are extensively used in engineering structures and fatigue failure is one of the most common failure modes of metal structures. Fatigue phenomena occur when a material is subjected to fluctuating stresses and strains, which lead to failure due to damage accumulation. Different methods, including the Palmgren-Miner linear damage rule- (LDR-) based, multiaxial and variable amplitude loading, stochastic-based, energy-based, and continuum damage mechanics methods, forecast fatigue life. This paper reviews fatigue life prediction techniques for metallic materials. An ideal fatigue life prediction model should include the main features of those already established methods, and its implementation in simulation systems could help engineers and scientists in different applications. In conclusion, LDR-based, multiaxial and variable amplitude loading, stochastic-based, continuum damage mechanics, and energy-based methods are easy, realistic, microstructure dependent, well timed, and damage connected, respectively, for the ideal prediction model.

Life Prediction of High Temperature Welded Component by Skeletal Point Rupture Stress

2010 ◽  
Vol 118-120 ◽  
pp. 156-160 ◽  
Author(s):  
Guo Dong Zhang ◽  
Yan Fen Zhao ◽  
Fei Xue ◽  
Zhao Xi Wang ◽  
Chang Yu Zhou
Keyword(s):  
High Temperature ◽  
Life Prediction ◽  
Power Plants ◽  
Damage Mechanics ◽  
Welded Joint ◽  
Stress Rupture ◽  
Continuum Damage Mechanics ◽  
Chemical Plants ◽  
Continuum Damage ◽  
Rupture Stress

At the present time, as the steam conditions and capability of the supercritical power unit increasing, the unit reliability is an important factor for the unit efficiency. High temperature, thick walled pipes are widely used in power plants and chemical plants. In this paper, life of the welded joint was predicted by the methods of skeletal point (SP) rupture stress rupture stress, which was calculated by finite element method (FEM). For the life prediction of welded component, the continuum damage mechanics was employed too. The life prediction of the welded joint by SP rupture stress was compared with the life prediction by the method of continuum damage mechanics (CDM). The research results showed that the two predicted methods were consistent. So, it can be concluded that the SP rupture stress can be used for predicting life of the high temperature welded component. The SP rupture stress method was used conveniently for the structure of power plant or other high temperature components.

Sign in / Sign up

Export Citation Format

Share Document