Home Security System Using RaspberryPi

Author(s):  
Pratik Banerjee ◽  
Parabi Datta ◽  
Suhankar Pal ◽  
Sangbit Chakraborty ◽  
Ankur Roy ◽  
...  
2014 ◽  
Vol 68 ◽  
pp. 00025 ◽  
Author(s):  
Santoso Budijono ◽  
Jeffri Andrianto ◽  
Muhammad Axis Novradin Noor

1998 ◽  
Vol 44 (4) ◽  
pp. 1360-1366 ◽  
Author(s):  
Sin-Min Tsai ◽  
Po-Ching Yang ◽  
Shyi-Shiou Wu ◽  
Shya-Shiow Sun

Author(s):  
Vemireddy Sai sindhu reddy ◽  
P. V. K. Sai ◽  
Anupama Namburu

2019 ◽  
Vol 4 (2) ◽  
pp. 112-120
Author(s):  
Hadjira BELAIDI ◽  
Nour-El-Houda MEDDAH

This work deals with lock and home security systems. First, Motion sensors detect movement indoors and outdoors to guard against intruders, protect valuables and more. Thus, if any movement, RFID reader will be activated and database will be scanned to identify the persons who have the access to the home. This enhances the effectiveness of the security system and provides the user with the complete, whole-house protection he needs. An RFID badge can be used to unlock the door and access to the home. Alerts also are received on the smart phone if motion is sensed in a protected area inside or outside; giving the user the information it needs to act quickly. The door can also be remotely locked/unlocked. A microcontroller (ATmega2560) is used to control the entire system, and GSM is used to send alerts to the Smartphone. An Ethernet shield that connects the microcontroller to the database (DB) is also added.


Author(s):  
Wahyuni Kurniasih ◽  
Abdul Rakhman ◽  
Irma Salamah

The house is the most valuable asset, therefore security at home is also very important. Therefore a home security system is created that combines a microcontroller with an Android smartphone application. The microcontroller used is the Raspberry Pi which is equipped with a camera as a home security monitoring system and various sensors as detectors such as magnetic, PIR sensors and solenoids as automatic door locks. So if the sensors that are installed detect something at home, then the homeowner will immediately get a notification sent by the database to the smartphone application, and the homeowner can monitor the state of the house right then through photos and videos recorded by cameras that have been installed at home.


2018 ◽  
Vol 5 (1) ◽  
pp. 137-144
Author(s):  
Ade Mubarok ◽  
Ivan Sofyan ◽  
Ali Akbar Rismayadi ◽  
Ina Najiyah

Abstrak Keamanan merupakan hal sangat penting bagi setiap orang. Rumah yang sering ditinggal pemiliknya dapat dimanfaatkan oleh pencuri untuk melakukan aksinya. Oleh karena itu diperlukan sistem keamanan rumah yang efektif agar pemilik rumah dapat mengetahui informasi apabila rumahnya dibobol oleh pencuri. Penulis merancang sebuah sistem keamanan rumah dengan memanfaatkan teknologi RFID yang di lengkapi dengan sensor PIR dan modul GSM sebagai sistem informasi peringatan SMS, dimana semua sistemnya diolah dalam sebuah mikrokontroler ATmega328. Tujuan dari penelitian ini untuk mengganti kunci konvesional dengan kunci solenoid sehingga sulit untuk diduplikat serta mengurangi kesempatan aksi pencurian ketika rumah dalam keadaan kosong. Metode penelitian yang digunakan antara lain dimulai dari pengumpulan data (observasi, wawancara dan studi pustaka) serta pembuatan alat (planning, analisis, desain dan testing). Berdasarkan hasil pengujian diperoleh bahwa kunci solenoid dapat bekerja sesuai dengan kartu akses RFID yang diberikan. Sensor PIR dan modul GSM dapat bekerja dengan baik saat pencuri masuk kedalam rumah, sehingga rumah menjadi aman ketika ditinggalkan oleh pemiliknya. Kata Kunci: RFID, Sensor PIR, Modul GSM, ATmega328 Abstract Security is very important for everyone. Homes that are often left the owner can be used by thieves to perform the action. Therefore required an effective home security system so that homeowners can find out information if the house burglarized by thieves. The author designed a home security system by utilizing RFID technology that is equipped with PIR sensor and GSM module as SMS warning information system, where all the system is processed in an ATmega328 microcontroller. The purpose of this research is to change the conventional key with the solenoid key so that it is difficult to duplicate and reduce the chance of theft action when the house is empty. Research methods used, among others, starting from data collection (observation, interview and literature study) as well as making tools (planning, analysis, design and testing). Based on the test results obtained that the solenoid key can work in accordance with the given RFID access card. PIR sensors and GSM modules work well when thieves enter the house, so the house becomes secure when left by the owner. Key Word: RFID, PIR Sensor, GSM Module, ATmega328


Sign in / Sign up

Export Citation Format

Share Document