Predicting the limiting mechanical characteristics of composites based on acrilonitrile-butadiene-styrene (ABS) plastics and rigid polymers

1982 ◽  
Vol 17 (4) ◽  
pp. 501-507
Author(s):  
A. Ya. Gol'dman ◽  
E. N. Kislov
Keyword(s):  
Mechanical Characteristics ◽  
Rigid Polymers ◽  
Butadiene Styrene ◽  
Abs Plastics

Application of SMA on the Alloy of Nylon6/ABS

2012 ◽  
Vol 501 ◽  
pp. 57-63
Author(s):  
Chao Wang ◽  
Ying Chun Li ◽  
Zhen Xing Yao
Keyword(s):  
Tensile Strength ◽  
Electron Microscope ◽  
Mechanical Characteristics ◽  
Acrylonitrile Butadiene Styrene ◽  
Mechanical Analysis ◽  
Melt Blending ◽  
Styrene Maleic Anhydride ◽  
The Impact ◽  
Scanning Electron ◽  
Butadiene Styrene

The alloy of Nylon6/Acrylonitrile-Butadiene-Styrene (ABS) with styrene-maleic anhydride (SMA) was prepared by melt blending as the compatilizer. Mechanical characteristics, dynamic mechanical analysis (DMA) and fracture appearances were determined. It was found that the impact and tensile strength firstly increased and then decreased along with the increase of the SMA content. The properties reached maximum values when the content of SMA was 2%. The results of DMA and scanning electron microscope (SEM) indicated that the addition of SMA can effectively enhance the compatibility of Nylon6 and ABS.

Prediction of the Lifetime of Acrylonitrile Butadiene Styrene (ABS), by Calculation of Damage by Two Methods: Damage Based on Residual Stresses and Damage by Stages Evolution

2019 ◽  
Vol 820 ◽  
pp. 203-211
Author(s):  
Fatima Sabah ◽  
Achraf Wahid ◽  
Fatimaezzahra Nassih ◽  
Mohamed El Ghorba ◽  
Hamid Chakir
Keyword(s):  
Experimental Study ◽  
High Performance ◽  
Elastic Limit ◽  
Mechanical Characteristics ◽  
Acrylonitrile Butadiene Styrene ◽  
The Other ◽  
Stress Maximum ◽  
The One ◽  
Geometrical Defects ◽  
Butadiene Styrene

The development of polymers has not stopped growing and taking more and more emphasis in our lives. From high-performance industries to mass-market industries, polymers are ubiquitous in every aspect of our lives, from where comes the pressing need to know their properties, characteristics, and behaviors more rigorously. This work is based on a study of the mechanical characterizations of thermoplastic polymers under the effects of damage. To serve this purpose, an experimental study was carried out on thermoplastic ABS (Acrylonitrile Butadiene Styrene) specimens. At first, we worked on altered specimens to define the mechanical characteristics of our material such as the elastic limit, the stress maximum, the breaking stress and the Young's modulus. On the one hand, and on the other hand we have created geometrical defects (discontinuity) on specimens in (ABS), to have the effect of defects on the mechanical characteristics of the material, afterwards a study of damage carried out by two methods to determine the critical fraction of life. To determine the lifetime of the ABS.

Sign in / Sign up

Export Citation Format

Share Document