Metal products are subjected to atmospheric corrosion during transportation and storing. An important way to prevent this negative phenomenon is application of special packing materials, in particular materials, containing volatile inhibitors of corrosion, which protect metal against various corrosion agents. To protect metal effectively it is necessary to provide a definite level of operating characteristics of packing materials. The purpose of the work was the study of operating properties of inhibited crepe, inhibited and laminated polyethylene film, inhibited crepe and reinforced by polypropylene web papers, manufactured by OJSC “PP TechnoKhim”, Magnitogorsk, used for packing of metals. Structural and dimensional, sorption, deformation and strength characteristics, of the studied anticorrosion papers are presented, the characteristics being calculated based on the results of measurements. To determine their physical-mechanical and anticorrosion properties, standard methods and methodologies were used. To evaluate impact of moisture and transportation conditions, indices of water adsorption and wear of the studied papers were determined. Inhibitor content in these materials was determined by thermogravimetric analysis method. Their protective ability was studied on samples of low carbon steel strip. For accelerated corrosion tests the strip samples were degreased by alcohol, dried in air and packed in the studied anticorrosion papers, after that they were exposed under increased temperatures and moisture conditions. It was determined, that among the materials under the study, the inhibited crepe paper, reinforced by polypropylene web, hhas the best complex of physical-mechanical and anticorrosion properties. It provides a higher level of prevention corrosion of metal l and surpasses other materials in a number of deformation and strength characteristics. Recommendations were proposed to improve qquality of produced anticorrosion papers.
Assessment of the mutual influence of deformation-strength characteristics of the fastening system elements
