Effect of clinoptilolite addition and solids retention time on the extracellular polymeric substances composition and soluble chemical oxygen demands in activated sludge

2006 ◽  
Vol 23 (5) ◽  
pp. 767-772 ◽  
Author(s):  
Chang Gyun Kim ◽  
Changbok Lee ◽  
Tai-il Yoon
Keyword(s):  
Activated Sludge ◽  
Retention Time ◽  
Extracellular Polymeric Substances ◽  
Solids Retention Time ◽  
Solids Retention

Nitrogen removal in activated sludge systems including denitrification in secondary clarifiers

1994 ◽  
Vol 30 (6) ◽  
pp. 101-111 ◽  
Author(s):  
H. Siegrist ◽  
W. Gujer
Keyword(s):  
Activated Sludge ◽  
Nitrogen Removal ◽  
Retention Time ◽  
Secondary Clarifier ◽  
Solids Retention Time ◽  
Solids Retention ◽  
Activated Sludge Systems

Denitrification in the secondary clarifier can contribute substantially to the nitrogen removal of activated sludge systems. This is illustrated on two treatment plants with different secondary clarifier systems. A model to estimate denitrification capacity and to design activated sludge systems for nitrogen removal is developed and verified with data from two treatment plants. The model includes denitrification in the secondary clarifier, wastewater composition (soluble readily biodegradable COD, particulate degradable COD), oxygen input into the anoxic volume, temperature, and solids retention time (SRT). The influence of aerated grit chambers and primary sedimentation on denitrification is discussed.

scholarly journals The influence of solids retention time on activated sludge bioflocculation and membrane fouling in a membrane bioreactor (MBR)

2012 ◽  
Vol 401-402 ◽  
pp. 48-55 ◽  
Author(s):  
R. Van den Broeck ◽  
J. Van Dierdonck ◽  
P. Nijskens ◽  
C. Dotremont ◽  
P. Krzeminski ◽  
...  
Keyword(s):  
Activated Sludge ◽  
Retention Time ◽  
Membrane Fouling ◽  
Membrane Bioreactor ◽  
Solids Retention Time ◽  
Solids Retention

Operating Experiences at Low Solids Retention Time

1984 ◽  
Vol 16 (12) ◽  
pp. 661-672 ◽  
Author(s):  
T E Wilson ◽  
W A Ambrose ◽  
H O Buhr
Keyword(s):  
Activated Sludge ◽  
Retention Time ◽  
Suspended Solids ◽  
Volume Index ◽  
Sludge Volume Index ◽  
Effluent Quality ◽  
Mixed Liquor ◽  
Solids Retention Time ◽  
Solids Retention ◽  
Typically Achieving

Five full scale activated sludge plants have been operated at low solids retention time (SRT, monthly averages as low as 0.8 days) and mixed liquor suspended solids (MLSS, monthly averages as low as 500 mg/l) values for 2 to 3 years. Operating results for this period are compared to 3 to 3-1/2 years of operation at conventional, higher, SRT and MLSS values. The data show that the lower SRT operation provided better effluent quality, typically achieving less than 15 mg/l of BOD5 or suspended solids, while not significantly increasing either the total (dry) sludge production or the sludge volume index (SVI). These data indicate that plants can be built and operated using significantly smaller tankage than conventionally accepted.

Sign in / Sign up

Export Citation Format

Share Document