Instantaneous trajectory planning for redundant manipulator in the presence of obstacles

2006 ◽  
pp. 252-263
Author(s):  
Chiung-Li Lee ◽  
Micheal W. Walker
Keyword(s):  
Trajectory Planning ◽  
Redundant Manipulator

Gain-optimization trajectory planning method for hyper-redundant manipulator with joint constraints

2019 ◽  
Vol 27 (5) ◽  
pp. 1075-1086
Author(s):  
王文瑞 WANG Wen-rui ◽  
刘克俭 LIU Ke-jian ◽  
顾金麟 GU Jin-lin ◽  
李 昂 LI Ang ◽  
储海荣 CHU Hai-rong ◽  
...  
Keyword(s):  
Trajectory Planning ◽  
Planning Method ◽  
Redundant Manipulator ◽  
Joint Constraints ◽  
Gain Optimization

Trajectory Planning of a Redundant Manipulator from Investigations of Upper Limb Motions of Human Beings

2012 ◽  
Vol 45 (2) ◽  
pp. 538-543
Author(s):  
Jui-Chou Chung ◽  
Chun-How Huang ◽  
Hung-Chyun Chou ◽  
Chung-Hsien Kuo
Keyword(s):  
Upper Limb ◽  
Trajectory Planning ◽  
Human Beings ◽  
Redundant Manipulator

scholarly journals Model-Predictive-Control-Based Time-Optimal Trajectory Planning of the Distributed Actuation Mechanism Augmented by the Maximum Performance Evaluation

2021 ◽  
Vol 11 (16) ◽  
pp. 7513
Author(s):  
Jong Ho Kim ◽  
Kyunghwan Choi ◽  
In Gwun Jang
Keyword(s):  
Performance Evaluation ◽  
Model Predictive Control ◽  
Predictive Control ◽  
Trajectory Planning ◽  
Optimal Trajectory ◽  
Redundant Manipulator ◽  
Maximum Performance ◽  
Actuation Mechanism ◽  
Time Optimal ◽  
Optimal Trajectory Planning

Trajectory planning for a redundant manipulator is a classic problem. However, because it is difficult to precisely evaluate its maximum performance, an optimization method has been typically used. In this study, a novel time-optimal trajectory planning method for a redundant manipulator is proposed using the model predictive control (MPC) augmented by the maximum performance evaluation (MPE). First, the optimization formulation is expressed to evaluate the maximum performance of the distributed-actuation-mechanism-based three-revolute-joint manipulator (DAM-3R), which has a high level of redundancy, and the joint-actuation-mechanism-based three-revolute-joint manipulator (JAM-3R) for comparison. The optimization is conducted by linking the multibody dynamics analysis module and the optimization module. For time-optimal trajectory planning, the MPC problem is then formulated using mathematical performance models for the DAM-3R and JAM-3R based on the MPE results, which are considered as the upper bound of the manipulator performance at each end-effector position. To verify the proposed method, a point-to-point task with no predefined path is investigated. The simulation results show that the working time of the DAM-3R is 19.1% less than that of the JAM-3R. Moreover, the energy consumption for the DAM-3R is 45.0% lower than that for the JAM-3R by optimally utilizing the higher redundancy of the DAM-3R. Thus, it can be concluded that the proposed method is effective for time-optimal trajectory planning for redundant manipulators.

Sign in / Sign up

Export Citation Format

Share Document