Investigation of flow distribution and effect of aspect ratio on critical heat flux in multiple parallel microchannel flow boiling

2020 ◽  
Author(s):  
Ayyaz Siddique ◽  
Ketan Sakalkale ◽  
Sandip K. Saha ◽  
Amit Agrawal
Keyword(s):  
Heat Flux ◽  
Aspect Ratio ◽  
Critical Heat Flux ◽  
Flow Boiling ◽  
Flow Distribution ◽  
Microchannel Flow

On the Nature of Critical Heat Flux in Microchannels

2005 ◽  
Vol 127 (1) ◽  
pp. 101-107 ◽  
Author(s):  
A. E. Bergles ◽  
S. G. Kandlikar
Keyword(s):  
Heat Flux ◽  
Critical Heat Flux ◽  
Flow Boiling ◽  
Flow Distribution ◽  
High Heat ◽  
Operating Conditions ◽  
High Heat Flux ◽  
Clear Understanding ◽  
Wide Range ◽  
Parallel Microchannels

The critical heat flux (CHF) limit is an important consideration in the design of most flow boiling systems. Before the use of microchannels under saturated flow boiling conditions becomes widely accepted in cooling of high-heat-flux devices, such as electronics and laser diodes, it is essential to have a clear understanding of the CHF mechanism. This must be coupled with an extensive database covering a wide range of fluids, channel configurations, and operating conditions. The experiments required to obtain this information pose unique challenges. Among other issues, flow distribution among parallel channels, conjugate effects, and instrumentation need to be considered. An examination of the limited CHF data indicates that CHF in parallel microchannels seems to be the result of either an upstream compressible volume instability or an excursive instability rather than the conventional dryout mechanism. It is expected that the CHF in parallel microchannels would be higher if the flow is stabilized by an orifice at the entrance of each channel. The nature of CHF in microchannels is thus different than anticipated, but recent advances in microelectronic fabrication may make it possible to realize the higher power levels.

scholarly journals Predicting Critical Heat Flux With Multiphase CFD: 4 Years in the Making

2017 ◽  
Author(s):  
Emilio Baglietto ◽  
Etienne Demarly ◽  
Ravikishore Kommajosyula
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Critical Heat Flux ◽  
Bubble Dynamics ◽  
Flow Boiling ◽  
Heated Surface ◽  
Force Balance ◽  
Modeling Framework ◽  
Lift Off ◽  
Limiting Condition

Advancement in the experimental techniques have brought new insights into the microscale boiling phenomena, and provide the base for a new physical interpretation of flow boiling heat transfer. A new modeling framework in Computational Fluid Dynamics has been assembled at MIT, and aims at introducing all necessary mechanisms, and explicitly tracks: (1) the size and dynamics of the bubbles on the surface; (2) the amount of microlayer and dry area under each bubble; (3) the amount of surface area influenced by sliding bubbles; (4) the quenching of the boiling surface following a bubble departure and (5) the statistical bubble interaction on the surface. The preliminary assessment of the new framework is used to further extend the portability of the model through an improved formulation of the force balance models for bubble departure and lift-off. Starting from this improved representation at the wall, the work concentrates on the bubble dynamics and dry spot quantification on the heated surface, which governs the Critical Heat Flux (CHF) limit. A new proposition is brought forward, where Critical Heat Flux is a natural limiting condition for the heat flux partitioning on the boiling surface. The first principle based CHF is qualitatively demonstrated, and has the potential to deliver a radically new simulation technique to support the design of advanced heat transfer systems.

Sign in / Sign up

Export Citation Format

Share Document