scholarly journals Time-resolved particle image velocimetry measurements of a tandem jet array in a crossflow at low velocity ratios

2021 ◽  
Vol 62 (4) ◽  
Author(s):  
Paul J. Kristo ◽  
Mark L. Kimber
Keyword(s):  
Particle Image Velocimetry ◽  
Particle Image ◽  
Low Velocity ◽  
Time Resolved ◽  
Image Velocimetry ◽  
Jet Array

scholarly journals Time-resolved particle image velocimetry measurements of a tandem jet array in a cross flow at low velocity ratios

2020 ◽  
Author(s):  
Paul Kristo ◽  
Mark L. Kimber
Keyword(s):  
Particle Image Velocimetry ◽  
Particle Image ◽  
Velocity Ratio ◽  
Cross Flow ◽  
Velocity Fields ◽  
Instantaneous Velocity ◽  
Low Velocity ◽  
Time Resolved ◽  
Turbulent Statistics ◽  
Image Velocimetry

Investigation of the near field dynamics of a single and tandem array of three jets are provided by 2-D time-resolved particle image velocimetry (TR-PIV) measurements. Instantaneous velocity fields are examined in the transverse and spanwise planes with jet to cross flow velocity ratios in the range from 0.9 to 1.7. Previous studies have shown that for high ratios (≥2), the leading jet provides sufficient shielding to ensure that all jets downstream exhibit nearly identical flow characteristics. The current transverse plane measurements exhibit more unique and localized features as a result of the competing effects of pressure gradients and vortex mechanisms assessed via the jet exit profiles, first and second order turbulent statistics, streamline trajectories, recirculation areas, and penetrations depths. Proper orthogonal decomposition (POD) is applied to the spanwise plane instantaneous velocity fields to determine the statistically dominant features of the single and tandem jet configurations at equivalent velocity ratios. The velocity fields are then reconstructed using the truncated POD modes to provide further insight into the shear layer and wake vortices that drive these configurations. Vortex identification algorithms are applied to the reconstructed velocity fields to determine the statistical characteristics of the vortices, including their centroids, populations, areas, and strengths, each of which exhibit largely different dependencies on jet configuration and velocity ratio. Several of the investigated metrics are found to exhibit different behaviors below and above a velocity ratio of unity, and also as a function of increasing velocity ratio between 1 and 2, implying that several transitions mechanisms are present in the low velocity ratio regime investigated herein.

scholarly journals Time-resolved particle image velocimetry measurements of the turbulent Richtmyer–Meshkov instability

2021 ◽  
Vol 917 ◽  
Author(s):  
Everest G. Sewell ◽  
Kevin J. Ferguson ◽  
Vitaliy V. Krivets ◽  
Jeffrey W. Jacobs
Keyword(s):  
Particle Image Velocimetry ◽  
Particle Image ◽  
Time Resolved ◽  
Image Velocimetry

Abstract

Time-Resolved Particle Image Velocimetry (PIV) Measurements in a Radial Diffuser Pump

2009 ◽  
Author(s):  
Jianjun Feng ◽  
Friedrich-Karl Benra ◽  
Hans Josef Dohmen
Keyword(s):  
Particle Image Velocimetry ◽  
Particle Image ◽  
Time Resolved ◽  
Piv Measurements ◽  
Part Load ◽  
Channel Characteristic ◽  
Image Velocimetry ◽  
Pump Stage ◽  
Low Specific Speed ◽  
Load Conditions

The truly time-variant unsteady flow in a low specific speed radial diffuser pump stage has been investigated by time-resolved Particle Image Velocimetry (PIV) measurements. The measurements are conducted at the midspan of the blades for the design condition and also for some severe part-load conditions. The instantaneous flow fields among different impeller channels are analyzed and compared in detail, and more attention has been paid to flow separations at part-load conditions. The analysis of the measured results shows that the flow separations at two adjacent impeller channels are quite different at some part-load conditions. The separations generally exhibit a two-channel characteristic.

Unveiling the Flow Behavior Inside GDI Engine Cylinder Using High-Speed Time-Resolved Particle Image Velocimetry and CFD Simulation

2021 ◽  
Author(s):  
Mohammed El Adawy ◽  
Morgan Heikal ◽  
bin Abd. Aziz Abd. Rashid
Keyword(s):  
Particle Image Velocimetry ◽  
High Speed ◽  
Particle Image ◽  
Cfd Simulation ◽  
Injection Pressure ◽  
Valve Lift ◽  
Fuel Spray ◽  
Time Resolved ◽  
Image Velocimetry ◽  
Spray Plume

Abstract RICARDO-VECTIS CFD simulation of the in-cylinder air flow was first validated with those of the experimental results from high-speed particle image velocimetry (PIV) measurements taking cognisant of the mid-cylinder tumble plane. Furthermore, high-speed fuel spray measurements were carried out simultaneously with the intake-generated tumble motion at high valve lift using high-speed time-resolved PIV to chronicle the spatial and time-based development of air/fuel mixture. The effect of injection pressure(32.5 and 35.0 MPa) and pressure variation across the air intake valves(150, 300 and 450 mmH2O) on the interaction process were investigated at valve lift 10 mm where the tumble vortex was fully developed and filled the whole cylinder under steady-state conditions. The PIV results illustrated that the intake generated-tumble motion had a substantial impact on the fuel spray distortion and dispersion inside the cylinder. During the onset of the injection process the tumble motion diverted the spray plume slightly towards the exhaust side before it followed completely the tumble vortex. The fuel spray plume required 7.2 ms, 6.2 ms and 5.9 ms to totally follow the in-cylinder air motion for pressure differences 150, 300 and 450 mmH2O, respectively. Despite, the spray momentum was the same for the same injection pressure, the magnitude of kinetic energy was different for different cases of pressure differences and subsequently the in-cylinder motion strength.

Investigation of Film Cooling Using Time-Resolved Stereo Particle Image Velocimetry

2020 ◽  
Author(s):  
Katharina Stichling ◽  
Maximilian Elfner ◽  
Hans-Jörg Bauer
Keyword(s):  
Particle Image Velocimetry ◽  
Film Cooling ◽  
Particle Image ◽  
Density Ratio ◽  
Test Rig ◽  
Time Resolved ◽  
Hot Gas ◽  
Image Velocimetry ◽  
Stereo Particle Image Velocimetry ◽  
Cooling Air

Abstract In the present study an existing test rig at the Institute of Thermal Turbomachinery (ITS), Karlsruhe Institute of Technology (KIT) designed for generic film cooling studies is adopted to accommodate time resolved stereoscopic particle image velocimetry measurements. Through a similarity analysis the test rig geometry is scaled by a factor of about 20. Operating conditions of hot gas and cooling air inlet and exit can be imposed that are compliant with realistic engine conditions including density ratio. The cooling air is supplied by a parallel-to-hot gas coolant flow-configuration with a coolant Reynolds number of 30,000. Time-resolved and time-averaged stereo particle image velocimetry data for a film cooling flow at high density ratio and a range of blowing ratios is presented in this study. The investigated film cooling hole constitutes a 10°-10°-10° laidback fan-shaped hole with a wide spacing of P/D = 8 to insure the absence of jet interaction. The inclination angle amounts to 35°. The time-resolved data indicates transient behaviour of the film cooling jet.

Sign in / Sign up

Export Citation Format

Share Document