Wavelength division multiplexing transmission using multimode erbium doped fiber amplifier with elevated refractive index profile

Abstract Different fiber amplifiers such as semiconductor optical amplifier, erbium-doped fiber amplifier and erbium ytterbium-co-doped fiber amplifier (EYCDFA) are investigated for 16×40 GB/s wavelength division multiplexing system. Various performance parameters including Q-factor, bit error rate, jitter, eye opening and eye closure are observed and analyzed. It is reported that EYCDFA is a better choice among the tested amplifiers. The proposed system is also investigated in terms of transmission distance.

Download Full-text

Cost-effective double pass erbium doped fiber amplifier with an embedded dispersion compensation module and all-optical gain control for wavelength-division multiplexing applications

Optical Engineering ◽

10.1117/1.2800000 ◽

2007 ◽

Vol 46 (10) ◽

pp. 105002

Author(s):

Julio C. R. F. de Oliveira

Keyword(s):

Wavelength Division Multiplexing ◽

Dispersion Compensation ◽

Gain Control ◽

Optical Gain ◽

Cost Effective ◽

Fiber Amplifier ◽

Double Pass ◽

Erbium Doped Fiber Amplifier ◽

Wavelength Division ◽

Erbium Doped

Download Full-text

Performance Analysis of WDM-PON System Based on Optimized Remotely Pumped Erbium-Doped Fiber Amplifier (EDFA) Parameter

Journal of Optical Communications ◽

10.1515/joc-2014-0029 ◽

2015 ◽

Vol 36 (2) ◽

Author(s):

N. Ahmed ◽

Hilal A. Fadhil ◽

S. A. Aljunid ◽

Md. Sharafat Ali ◽

Matiur Rahman

Keyword(s):

Output Power ◽

Wavelength Division Multiplexing ◽

Noise Figure ◽

Optical Network ◽

Fiber Amplifier ◽

Passive Optical Network ◽

Erbium Doped Fiber Amplifier ◽

Wavelength Division ◽

Erbium Doped ◽

Wdm Pon

AbstractIn this paper, the performance of wavelength division multiplexing-passive optical network (WDM-PON) system using the erbium-doped fiber amplifier (EDFA) is optimized and evaluated. The optimization is analyzed by finding the EDFA length range at which the output power produced are the highest and the pump power range at which the gain flatness produced are within the effective range (0.3 dB). After the optimization process, the optimized EDFA system produces the gain of 26.6±0.292 dB, noise figure of 3.82 dB and output power of 7 dBm and the system is then implemented into WDM system. The performance of WDM system is compared against the system without EDFA in terms of bit error rate (BER). Results obtained prove that the proposed system with the EDFA consistently performs better than the conventional system.

Download Full-text

Performance Evaluation of Proposed WDM Optical Link Using EDFA and FBG Combination

Journal of Optical Communications ◽

10.1515/joc-2018-0044 ◽

2019 ◽

Vol 40 (2) ◽

pp. 101-107 ◽

Cited By ~ 3

Author(s):

Deepti Ahlawat ◽

Payal Arora ◽

Suresh Kumar

Keyword(s):

Wavelength Division Multiplexing ◽

Chromatic Dispersion ◽

Fiber Amplifier ◽

Q Factor ◽

Wavelength Band ◽

Modulation Formats ◽

Erbium Doped Fiber Amplifier ◽

Wavelength Division ◽

Modulation Format ◽

Erbium Doped

Abstract Analysis of wavelength division multiplexing (WDM) system utilizing erbium-doped fiber amplifier (EDFA) has been carried out by many researchers. In this paper, the performance analysis of 8-channel WDM system utilizing EDFA and fiber Bragg grating (FBG) combination is carried out in a wavelength band 1546–1552 nm at 10 Gbps. The performance of three apodization functions (Uniform, Gaussian and Tanh) of FBG is compared using return-to-zero (RZ) and non-return-to-zero modulation formats at fiber lengths 50, 60, 70 and 80 km. Also, the performance of FBG is compared for both aspects: with chirp and without chirp for grating lengths 5–10 mm. The Gaussian apodized and linearly chirped FBG outperformed the other two in compensating chromatic dispersion. Optimum values of Q-factor are also obtained using linearly chirped FBG with RZ modulation format at 10 mm of grating length.

Download Full-text