The removal of coke from an aged industrial hydrodesulfurization catalyst, using dielectric barrier discharge (DBD) non-thermal plasma with a pin to plate geometry, was investigated. The aged catalyst was introduced into the plasma reactor as a thin wafer. After 130 minutes of plasma treatment, with P = 30 W, 70% of the coke was removed while more than 40% of the sulfur was still present. Characterization of catalyst at different locations of the wafer showed that the coke was more easily removed at the center, close to the pin electrode where the electric field was more intense. The formation of an unexpected phase, under the plasma discharge, was highlighted, it corresponded to the family of Keggin HPA PMo12O40 3−, which could be an interesting precursor of catalyst for the hydrodesulfurization (HDS) process. Compared with a coked zeolite, the rate of regeneration is lower for the HDS catalyst under plasma discharge, while a lower temperature is required under conventional thermal oxidation. This is explained by the presence of metal particles, which could be responsible for the limitation in O-atom formation under plasma.
Oxidation of clofibric acid in aqueous solution using a non-thermal plasma discharge or gamma radiation