Dual Feed Pattern Reconfigurable Antenna for Wireless Applications

2018 ◽  
Vol 99 (2) ◽  
pp. 829-837 ◽  
Author(s):  
Amutha Jeevakumari Sigamani Annamary ◽  
Nagarajan Velmurugan
Electronics ◽  
2021 ◽  
Vol 10 (11) ◽  
pp. 1321
Author(s):  
Wahaj Abbas Awan ◽  
Syeda Iffat Naqvi ◽  
Wael Abd Ellatif Ali ◽  
Niamat Hussain ◽  
Amjad Iqbal ◽  
...  

This paper presents a compact and simple reconfigurable antenna with wide-band, dual-band, and single-band operating modes. Initially, a co-planar waveguide-fed triangular monopole antenna is obtained with a wide operational frequency band ranging from 4.0 GHz to 7.8 GHz. Then, two additional stubs are connected to the triangular monopole through two p-i-n diodes. By electrically switching these p-i-n diodes ON and OFF, different operating frequency bands can be attained. When turning ON only one diode, the antenna offers dual-band operations of 3.3–4.2 GHz and 5.8–7.2 GHz. Meanwhile, the antenna with single-band operation from 3.3 GHz to 4.2 GHz can be realized when both of the p-i-n diodes are switched to ON states. The proposed compact size antenna with dimensions of 0.27λ0 × 0.16λ0 × 0.017λ0 at the lower operating frequency (3.3 GHz) can be used for several wireless applications such as worldwide interoperability for microwave access (WiMAX), wireless access in the vehicular environment (WAVE), and wireless local area network (WLAN). A comparative analysis with state-of-the-art works exhibits that the presented design possesses advantages of compact size and multiple operating modes.


With the increase in wireless applications, there is a need for compact antennas that adapt their behavior with changing system requirements or environmental conditions. Here adapt implies the antenna should be able to alter operating frequencies, impedance bandwidths, polarizations, radiation patterns. These all features are provided by the “Reconfigurable antenna”. The important feature of reconfigurable antenna is that, they provide the same throughput as a multi-antenna system. A compact frequency reconfigurable antenna is designed with the aid of Ansoft HFSS that provides multiple frequency bands. This is achieved by using electrical switches such as PIN diodes. Depending on state of switches different operating frequencies are obtained. The switches placed on the antenna elements are powered wirelessly by the antenna itself. The design, geometries and simulation results of a frequency reconfigurable antenna are presented in this report. Further advancements are to be done for this structure to achieve polarization and radiation pattern re-configurability.


2021 ◽  
Vol 25 (3) ◽  
pp. 1-9
Author(s):  
Abdullah A. Jabber ◽  
◽  
Raad H. Thaher ◽  

This article presents design and simulation of a new compact four-element dual-band MIMO frequency reconfigurable antenna that can be reconfigured for WiMAX and LTE applications. The antenna includes four elements at the same FR4 substrate with an optimized overall size of 65x65x1.6 mm3 and an optimized partial GND plane of 30x11.125 mm2. The reconfiguration rate is between 2.41 and 3.99 GHz that can cover the WiMAX and LTE wireless devices by applying just one RF (PIN) switch to change the operating frequency. The antenna operates on the two states of the PIN diode under its two states ON and OFF with (2.7 GHz, and 2.8 GHz) resonant frequencies respectively. The proposed antenna produces acceptable simulation results for the MIMO system by achieving gain from (3-7.2) dBi, less than -14.5 dB coupling effect, less than 0.28 envelope correlation coefficient, and diversity gain range from 8.4-10.


Sign in / Sign up

Export Citation Format

Share Document