The effects of flue gas desulfurization gypsum (FGD gypsum) on P fractions in a coastal plain soil

2017 ◽  
Vol 18 (3) ◽  
pp. 804-815 ◽  
Author(s):  
Kun He ◽  
Xiaoping Li ◽  
Longli Dong
2020 ◽  
Vol 26 ◽  
pp. 81-85
Author(s):  
Hana Sekavová ◽  
Jakub Herrmann ◽  
Zdeněk Prošek ◽  
Miroslav Nyč ◽  
George Karra’a

The article presents the first results from research, which is deal with recycling of plaster boards and use of the resulting material. The research is carried out within the project MPO Trio c. FV30359 “Recyklace sádrokartonových desek a nová materiálová využití s pridanou hodnotou – GIPSRec”. The plasterboards are produced of stucco, which is calcinated of Flue Gas Desulfurization Gypsum (FGD Gypsum). There is possibility to replace a part of this stucco with recycled material. There is opportunity for saving costs for production. The question how this utilization can change the properties of the products is very important and it is necessary to find the possible improvement or deterioration. This is the objective of this research. The effect on properties was monitored on the samples which was prepared of only pure stucco and of stucco with part of recycled material. There was observed water ratio (splash test), setting times, volume changes, flexural strength, compressive strength and elasticity module.


2011 ◽  
Vol 52 (6) ◽  
pp. 1303-1307
Author(s):  
Kyungsun Song ◽  
Young-Nam Jang ◽  
Jun-Hwan Bang ◽  
Soo-Chun Chae ◽  
Wonbaek Kim

Crystals ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1475
Author(s):  
Cheng Wang ◽  
Hang He ◽  
Yuli Wang ◽  
Wenyue Xue

In order to explore the influence of the types of waste gypsum on the properties of alkali slag cement, fluorogypsum (FG) and flue-gas desulfurization (FGD) gypsum were comparatively investigated. Moreover, the action mechanisms of FG and FGD gypsum on the properties of alkali slag cement were analyzed. The results show that both the FG and FGD gypsum prolonged the setting time of the alkali slag cement paste. However, the prolongation effect of FG was more pronounced than the FGD gypsum. When the compressive strength was maximum, the contents of FG and FGD gypsum were 5 and 6 wt.%, respectively. At 3 and 28 days, compared to the control sample, the compressive strengths increased by 59.3% and 24.3%, and 66.9% and 33.9%, respectively. Furthermore, the XRD, TG-DTA and SEM-EDS results showed that, with the increase in the contents of FG and FGD gypsum, ettringite was more easily produced and the hydration products were more abundant in the system. The greater the gypsum content of the paste, the less accumulated was the heat of hydration. The change of micro-structure caused by the formation of ettringite was the main reason for the difference in the properties of cement.


2021 ◽  
Vol 16 (1) ◽  
pp. 3-15
Author(s):  
Hongseok Jang ◽  
Seungyoung So

ABSTRACT Flue-gas desulfurization (FGD) gypsum has occasionally been used as an additive to cement. Consequently, appropriate facilities are required to ensure the environmentally safe processing of FGD gypsum and the resulting cement material properties. Such facilities are yet to be developed because the amount of FGD gypsum used is still small when compared with the vast amounts of FGD gypsum generated. In this study, we analyze the effect of FGD gypsum addition on the physical properties, stabilization, and radon count of steam-cured mortar and compare its performance with air-cured mortar. Our results show that the steam-cured pozzolanic hydration products of ettringite and C-S-H promote the densification of the mortar structure, thereby resulting in nanopore size reduction and increased strength of FGD gypsum mortar subsequent to the steam-cured hydration process. Further, our environmental test results indicate that steam-cured pozzolanic materials composed of FGD gypsum are environmentally safer than air-cured cementitious materials.


Author(s):  
Piyarat Vijuksungsith ◽  
Tunlawit Satapanajaru ◽  
Chanat Chokejaroenrat ◽  
Chalor Jarusutthirak ◽  
Chainarong Sakulthaew ◽  
...  

2017 ◽  
Vol 63 (No. 2) ◽  
pp. 47-54 ◽  
Author(s):  
Ochecová Pavla ◽  
Mercl Filip ◽  
Košnář Zdeněk ◽  
Tlustoš Pavel

Application of biomass ash to soil can save mineral nutrients due to its relatively high contents of Ca, K, and P. The study assessed the effect of powdered ash and pellets made from wood fly ash (WFA), combined moreover with additives rich in S (flue gas desulfurization gypsum – FGDG) and P (single superphosphate – SP) on the yield and uptake of nutrients (Ca, K, P, and S) by ryegrass (Lolium perenne L.), the accumulation of nutrients in plant biomass at individual four cuttings, and the available nutrients amount in the acidic loamy soil after the last harvest. Plants grown in pots enriched by wood ash showed significantly higher yield and nutrient uptake than in the unamended treatments. The uptake of nutrients by plants, content of nutrients in plants and in soil was substantially positively influenced by both components added to the wood ash, especially by FGD gypsum. The combination of wood ash with additives proved to be effective. The soil enrichment by WFA + SP + FGDG increased the availability of SP-contained P and available P content in soil even after harvest.  


2013 ◽  
Vol 405-408 ◽  
pp. 2681-2685
Author(s):  
Ji Xiu Zhang ◽  
Peng Xuan Duan ◽  
Ye Zhang

In this paper, the flue gas desulfurization gypsum (FGD) generated from thermal power plant is used to produce high strength gypsum. The basic properties of super high strength gypsum prepared by FGD gypsum are investigated based on the test results of strength, thermal expansion rate, crystal appearance and size. The results indicate that the properties of high strength gypsum prepared by FGD gypsum above α50 standard. This can be a reference for gypsum-based α super high-strength gypsum related product development.


Sign in / Sign up

Export Citation Format

Share Document