Flow Behavior of SUS304 Stainless Steel Under a Wide Range of Forming Temperatures and Strain Rates

2021 ◽  
Author(s):  
Qide Zheng ◽  
Xincun Zhuang ◽  
Zhen Zhao
Keyword(s):  
Stainless Steel ◽  
Flow Behavior ◽  
Strain Rates ◽  
Sus304 Stainless Steel ◽  
Wide Range

Rheo-Optics Studies in the Development of Hybrid Liquid Crystalline Based Mwir Polarizers

1999 ◽  
Vol 559 ◽  
Author(s):  
P.T. Mather ◽  
W. Barnes ◽  
P.J. Hood ◽  
T.J. Bunning
Keyword(s):  
Liquid Crystalline ◽  
Flow Behavior ◽  
Optical Microscope ◽  
Processing Technique ◽  
Strain Rates ◽  
Alignment Layer ◽  
Small Pitch ◽  
Wide Range ◽  
Measured Polarization ◽  
Free Films

ABSTRACTWe present here a rheo-optical study of the flow behavior of two cholesteric liquid crystals, one with a large pitch and one with a small pitch. The large pitch compound has been investigated as a possible fixed wavelength polarizer in the mid-wavelength infra-red region (3-5 micron). The investigation of these compounds is driven by their low melt viscosity and ability to vitrify order, and thus functionality, into films with a wide range of thickness. In our attempts to obtain consistent thin films with reproducible contrast ratios, we explored the defect textures of both compounds under a polarizing optical microscope. These materials were sheared at various strain rates and at various temperatures in an attempt to determine the best processing window for defect free films. The pitch lengths of the two materials investigated were 160 and 1330 nm. The flow behavior of the large pitch material resembles a pure nematic with defect refinement taking place under flow. The short pitch material exhibited the typical Grandjean oily streaks upon shearing followed by coarsening. Observations made during this rheological study were used to identify a processing technique for the large pitch materials. Upon application of a conventional buffed alignment layer, films with consistent quality were routinely made. The measured polarization contrast of >70:1 exceeds the values obtained from state-of-the art commercial polarizers in this wavelength regime.

A Mathematical Description for the Stress-Strain Behavior of Annealed 2 1/4 Cr-1 Mo Steel

1976 ◽  
Vol 98 (2) ◽  
pp. 118-125 ◽  
Author(s):  
R. L. Klueh ◽  
T. L. Hebble
Keyword(s):  
Mathematical Description ◽  
Flow Behavior ◽  
True Strain ◽  
Empirical Relationship ◽  
Tensile Tests ◽  
Strain Rates ◽  
Strain Behavior ◽  
Test Conditions ◽  
Wide Range ◽  
Strain Data

We have conducted a detailed series of tensile tests on one heat of annealed 2 1/4 Cr-1 Mo steel over the range 25 to 593°C (75 to 1100°F) and at nominal strain rates of 0.4, 0.04, 0.004, and 0.0004/min. To determine an empirical relationship to represent the flow behavior, we fitted the true-stress true-strain data from these tests to several proposed models. The models fit were those proposed by Hollomon, Ludwik, Ludwigson, and Voce. From a comparison of the standard error of estimate, the Voce equation was concluded to be the best mathematical description of the data under most test conditions and the best single representation over the wide range of test conditions.

Prediction of the Flow Stress of 00Cr17Ni14Mo2 Steel during Hot Deformation

2011 ◽  
Vol 460-461 ◽  
pp. 802-805
Author(s):  
Nan Hai Hao ◽  
Shao Wei Pan
Keyword(s):  
Stainless Steel ◽  
Elevated Temperature ◽  
Flow Stress ◽  
Hot Deformation ◽  
Flow Behavior ◽  
Strain Rates ◽  
Forming Process ◽  
Proposed Model ◽  
316L Austenitic Stainless Steel ◽  
Deformation Tests

The knowledge of the flow behavior of metals during hot deformation is of great importance in determining the optimum forming conditions. In this paper, the flow stress of 00Cr17Ni14Mo2 (ANSI 316L) austenitic stainless steel in elevated temperature is measured with compression deformation tests. The temperatures at which the steel is compressed are 800-1100°C with strain rates of 0.01-1s-1. A mathematical regression model is proposed to describe the flow stress and the validation of the model is conducted also. The proposed model can be used to predict the corresponding flow stress-strain response of 00Cr17Ni14Mo2 stainless steel in elevated temperature for the numerical simulation and design of forming process.

Prediction of Flow Stress for Superplastic Tension Deformation

2014 ◽  
Vol 941-944 ◽  
pp. 1501-1504
Author(s):  
Zhi Ping Guan ◽  
Ming Wen Ren ◽  
Pin Kui Ma ◽  
Po Zhao
Keyword(s):  
Experimental Data ◽  
Constitutive Equation ◽  
Strain Rate ◽  
Flow Behavior ◽  
High Accuracy ◽  
Superplastic Flow ◽  
Al Alloy ◽  
Strain Rates ◽  
Good Reliability ◽  
Wide Range

With the development of numerical calculation and precision forming, constitutive equations are required to possess high accuracy and good reliability, rather than simplicity of mathematical form. Due to simple algorithm and constant parameters, the conventional constitutive models can not be suited to describing superplastic flow behavior which represents complex responses with a large strain. In this study, through surface fitting on experimental data from tension tests performed over a wide range of strain rates, tensile velocities and loads, an empirical approach was proposed to establish constitutive equation for complex superplastic behavior of Zn-5%Al alloy at 340 °C. The empirical constitutive equation not only represents the strain dependence and the strain rate dependence of stress, but also reflects the coupling effects of strain and strain rate on stress, which can not be achieved by traditional models. A comparison between the predicted flow stresses and the experimental data verified that the empirical constitutive equation has high accuracy and good reliability on modeling superplastic flow behavior of Zn-5%Al alloy at 340 °C in a wide range of strains 0~2.5 and strain rates 7.0×10-5~8.0×10-2s-1.

Sign in / Sign up

Export Citation Format

Share Document