scholarly journals Necessity and feasibility of improving the residual resistance factor of polymer flooding in heavy oil reservoirs

2010 ◽  
Vol 7 (2) ◽  
pp. 251-256 ◽  
Author(s):  
Leiting Shi ◽  
Zhongbin Ye ◽  
Zhuo Zhang ◽  
Changjiang Zhou ◽  
Shanshan Zhu ◽  
...  
Keyword(s):  
Heavy Oil ◽  
Polymer Flooding ◽  
Resistance Factor ◽  
Oil Reservoirs ◽  
Residual Resistance ◽  
Heavy Oil Reservoirs ◽  
Residual Resistance Factor

scholarly journals Effect of Non-Newtonian Flow on Polymer Flooding in Heavy Oil Reservoirs

Polymers ◽  
2018 ◽  
Vol 10 (11) ◽  
pp. 1225 ◽  
Author(s):  
Xiankang Xin ◽  
Gaoming Yu ◽  
Zhangxin Chen ◽  
Keliu Wu ◽  
Xiaohu Dong ◽  
...  
Keyword(s):  
Porous Media ◽  
Polymer Solution ◽  
Oil Recovery ◽  
Heavy Oil ◽  
Flow Behavior ◽  
Polymer Flooding ◽  
Oil Reservoirs ◽  
Flow In Porous Media ◽  
Newtonian Flow ◽  
Heavy Oil Reservoirs

The flow of polymer solution and heavy oil in porous media is critical for polymer flooding in heavy oil reservoirs because it significantly determines the polymer enhanced oil recovery (EOR) and polymer flooding efficiency in heavy oil reservoirs. In this paper, physical experiments and numerical simulations were both applied to investigate the flow of partially hydrolyzed polyacrylamide (HPAM) solution and heavy oil, and their effects on polymer flooding in heavy oil reservoirs. First, physical experiments determined the rheology of the polymer solution and heavy oil and their flow in porous media. Then, a new mathematical model was proposed, and an in-house three-dimensional (3D) two-phase polymer flooding simulator was designed considering the non-Newtonian flow. The designed simulator was validated by comparing its results with those obtained from commercial software and typical polymer flooding experiments. The developed simulator was further applied to investigate the non-Newtonian flow in polymer flooding. The experimental results demonstrated that the flow behavior index of the polymer solution is 0.3655, showing a shear thinning; and heavy oil is a type of Bingham fluid that overcomes a threshold pressure gradient (TPG) to flow in porous media. Furthermore, the validation of the designed simulator was confirmed to possess high accuracy and reliability. According to its simulation results, the decreases of 1.66% and 2.49% in oil recovery are caused by the difference between 0.18 and 1 in the polymer solution flow behavior indexes of the pure polymer flooding (PPF) and typical polymer flooding (TPF), respectively. Moreover, for heavy oil, considering a TPG of 20 times greater than its original value, the oil recoveries of PPF and TPF are reduced by 0.01% and 5.77%, respectively. Furthermore, the combined effect of shear thinning and a threshold pressure gradient results in a greater decrease in oil recovery, with 1.74% and 8.35% for PPF and TPF, respectively. Thus, the non-Newtonian flow has a hugely adverse impact on the performance of polymer flooding in heavy oil reservoirs.

scholarly journals Mechanisms on the Injection Conformance Reversion during Polymer Flooding of Offshore Heterogeneous Heavy-Oil Reservoirs

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Zhijie Wei ◽  
Xiaodong Kang ◽  
Yuyang Liu ◽  
Hanxu Yang
Keyword(s):  
Polymer Solution ◽  
Heavy Oil ◽  
Flow Resistance ◽  
Polymer Flooding ◽  
Production Performance ◽  
Oil Reservoirs ◽  
Resistance Force ◽  
Oil Viscosity ◽  
Permeable Layer ◽  
Heavy Oil Reservoirs

Injection conformance reversion commonly observed during polymer flooding in offshore heterogeneous heavy-oil reservoirs weakens the volumetric sweep of polymer solution and compromises its EOR results. To investigate its mechanisms and impact factors, one mathematical model to predicate injection conformance behavior is constructed for heterogeneous reservoirs based on the Buckley-Leverett function. The different suction capability of each layer to polymer solution results in distinct change law of the flow resistance force, which in turn reacts upon the suction capability and creates dynamic redistribution of injection between layers. Conformance reversion takes place when the variation ratio of flow resistance force of different layers tends to be the same. The peak value and scope of conformance reversion decrease and reversion timing is advanced as oil viscosity or permeability contrast increases, or polymer concentration or relative thickness of low permeable layer decreases, which compromises the ability of polymer flooding to improve the volumetric sweep and lower suction of the low permeable layer. The features of offshore polymer flooding tend to make the injection conformance V-type and create low-efficiency circulation of polymer in a high permeable layer more easily. These results can provide guidance to improve the production performance of polymer flooding in offshore heterogeneous heavy-oil reservoirs.

Study of Surfactant-Polymer Flooding in Heavy Oil Reservoirs

2012 ◽  
Author(s):  
Anzhou Feng ◽  
Jijiang Ge ◽  
Guicai Zhang ◽  
Ping Jiang ◽  
Haihua Pei ◽  
...  
Keyword(s):  
Heavy Oil ◽  
Polymer Flooding ◽  
Oil Reservoirs ◽  
Heavy Oil Reservoirs

Analysis and Correlations of Viscous Fingering in Low-Tension Polymer Flooding in Heavy Oil Reservoirs

2010 ◽  
Vol 24 (12) ◽  
pp. 6384-6392 ◽  
Author(s):  
Benyamin Yadali Jamaloei ◽  
Riyaz Kharrat ◽  
Farshid Torabi
Keyword(s):  
Heavy Oil ◽  
Viscous Fingering ◽  
Polymer Flooding ◽  
Oil Reservoirs ◽  
Heavy Oil Reservoirs ◽  
Low Tension

Study of Surfactant-Polymer Flooding in Heavy Oil Reservoirs

2012 ◽  
Author(s):  
Anzhou Feng ◽  
Guicai Zhang ◽  
Jijiang Ge ◽  
Ping Jiang ◽  
Haihua Pei ◽  
...  
Keyword(s):  
Heavy Oil ◽  
Polymer Flooding ◽  
Oil Reservoirs ◽  
Heavy Oil Reservoirs
Sign in / Sign up

Export Citation Format

Share Document