Characteristics of unsteady flow field and flow-induced noise for an axial cooling fan used in a rack mount server computer

2016 ◽  
Vol 30 (10) ◽  
pp. 4601-4607 ◽  
Author(s):  
Tae-Gyun Lim ◽  
Wan-Ho Jeon ◽  
Gaku Minorikawa
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Cooling Fan ◽  
Flow Induced Noise ◽  
Server Computer

Numerical Study on Flow Characteristics and Flow Induced Noise of Flexible NACA0018 Airfoil

2015 ◽  
Author(s):  
Rui-xian Ma ◽  
Guang-hui Zhang ◽  
Zhan-sheng Liu ◽  
Dian-lai Li
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Vortex Shedding ◽  
Pressure Fluctuation ◽  
Wall Pressure ◽  
Attack Angle ◽  
Arbitrary Boundary ◽  
Wall Pressure Fluctuation ◽  
Flow Induced Noise ◽  
Naca0018 Airfoil

A numerical investigation of unsteady flow field and flow induced noise frequency characteristics of a 2-D NACA0018 airfoil taking into account the airfoil’s deformation with different angles of attack is presented. The large eddy simulation (LES) method is employed to compute the unsteady flow field, the dynamic response of structure is simulated with finite element code, and the two different fields are coupled via a two way coupling method with the exchange of pressure and displacement. The far field sound levels and frequency features are calculated using FW-H equation with arbitrary boundary movement involved. The flow field results show that flow separation and wall pressure fluctuation are controlled by the deformation of flexible airfoil significantly, which indicates the effects of attack angle are attenuated. Compared with common quasi-periodic vortex shedding, the vortex shedding at 0 degree is obtained to be a restrict periodic process, and the shedding frequency is about 950Hz, and this phenomenon is confirmed both by wall pressure fluctuation and acoustic spectrum characteristics. In addition, the overall sound pressure levels in chordwise and normal direction are influenced by attack angle in different ways.

Modal characteristics and fluid–structure interaction vibration response of submerged impeller

2021 ◽  
pp. 107754632110036
Author(s):  
Shihui Huo ◽  
Hong Huang ◽  
Daoqiong Huang ◽  
Zhanyi Liu ◽  
Hui Chen
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Damping Ratio ◽  
Pure Water ◽  
Vibration Response ◽  
Modal Identification ◽  
Liquid Oxygen ◽  
Modal Characteristics ◽  
Oxygen Pump ◽  
Turbo Pump

Turbo pump is one of the elements with the most complex flow of liquid rocket engine, and as an important component of turbo pump, an impeller is the weak point affecting its reliability. In this study, a noncontact modal characteristic identification technique was proposed for the liquid oxygen pump impeller. Modal characteristics of the impeller under three different submerged media, air, pure water, and brine with same density as liquid oxygen, were tested based on the noncontact modal identification technology. Submersion state directly affects the modal frequencies and damping ratio. The transient vibration response characteristics of the impeller excited by the unsteady flow field was achieved combining with unsteady flow field analysis and transient dynamic analysis in the whole flow passage of the liquid oxygen pump. Vibration responses at different positions of the impeller show 10X and 20X frequencies, and the amplitude at the root of short blade is significant, which needs to be paid more attention in structural design and fatigue evaluation.

scholarly journals Analysis of Unsteady Flow Field in Rotating Detonation Turbine Engine

2021 ◽  
Vol 1750 ◽  
pp. 012070
Author(s):  
Bing Ji ◽  
Zhiduo Wang ◽  
Jun Li
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Turbine Engine ◽  
Rotating Detonation

scholarly journals Unsteady flow field around a human hand and propulsive force in swimming

2009 ◽  
Vol 42 (1) ◽  
pp. 42-47 ◽  
Author(s):  
K. Matsuuchi ◽  
T. Miwa ◽  
T. Nomura ◽  
J. Sakakibara ◽  
H. Shintani ◽  
...  
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Human Hand ◽  
Propulsive Force

The Unsteady Flow Field of a Purged High Pressure Turbine Based on Mode Detection

2017 ◽  
Author(s):  
S. Zerobin ◽  
S. Bauinger ◽  
A. Marn ◽  
A. Peters ◽  
F. Heitmeir ◽  
...  
Keyword(s):  
High Pressure ◽  
Flow Field ◽  
Unsteady Flow ◽  
Flow Behavior ◽  
Low Pressure ◽  
Pressure Probe ◽  
Special Focus ◽  
High Pressure Turbine ◽  
Low Pressure Turbine ◽  
Mode Detection

This paper presents an experimental study of the unsteady flow field downstream of a high pressure turbine with ejected purge flows, with a special focus on a flow field discussion using the mode detection approach according to the theory of Tyler and Sofrin. Measurements were carried out in a product-representative one and a half stage turbine test setup, which consists of a high-pressure turbine stage followed by an intermediate turbine center frame and a low-pressure turbine vane row. Four independent purge mass flows were injected through the forward and aft cavities of the unshrouded high-pressure turbine rotor. A fast-response pressure probe was used to acquire time-resolved data at the turbine center frame duct inlet and exit. The interactions between the stator, rotor, and turbine center frame duct are identified as spinning modes, propagating in azimuthal direction. Time-space diagrams illustrate the amplitude variation of the detected modes along the span. The composition of the unsteadiness and its major contributors are of interest to determine the role of unsteadiness in the turbine center frame duct loss generation mechanisms and to avoid high levels of blade vibrations in the low-pressure turbine which can in turn result in increased acoustic emissions. This work offers new insight into the unsteady flow behavior downstream of a purged high-pressure turbine and its propagation through an engine-representative turbine center frame duct configuration.

Investigation of the Flow Field in a HP Turbine Stage for Two Stator-Rotor Axial Gaps: Part II — Unsteady Flow Field

2006 ◽  
Author(s):  
P. Gaetani ◽  
G. Persico ◽  
V. Dossena ◽  
C. Osnaghi
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Dominant Role ◽  
Outer Part ◽  
Secondary Flows ◽  
Pressure Probe ◽  
Turbine Stage ◽  
Mean Flow ◽  
Tip Leakage Flow ◽  
Flow Measurements

An extensive experimental analysis was carried out at Politecnico di Milano on the subject of unsteady flow in high pressure (HP) turbine stages. In this paper the unsteady flow measured downstream of a modern HP turbine stage is discussed. Traverses in two planes downstream of the rotor are considered and, in one of them, the effects of two very different axial gaps are investigated: the maximum axial gap, equal to one stator axial chord, is chosen to “switch off” the rotor inlet unsteadiness, while the nominal gap, equal to 1/3 of the stator axial chord, is representative of actual engines. The experiments were performed by means of a fast-response pressure probe, allowing for two-dimensional phase-resolved flow measurements in a bandwidth of 80 kHz. The main properties of the probe and the data processing are described. The core of the paper is the analysis of the unsteady rotor aerodynamics; for this purpose, instantaneous snapshots of the rotor flow in the relative frame are used. The rotor mean flow and its interaction with the stator wakes and vortices are also described. In the outer part of the channel only the rotor cascade effects can be observed, with a dominant role played by the tip-leakage flow and by the rotor tip passage vortex. In the hub region, where the secondary flows downstream of the stator are stronger, the persistence of stator vortices is slightly visible in the maximum stator-rotor axial gap configuration, while in the minimum stator-rotor axial gap configuration the interaction with the rotor vortices dominates the flow field. A fair agreement with the wakes and vortices transport models has been achieved. A discussion of the interaction process is reported giving particular emphasis to the effects of the different cascade axial gaps. Some final considerations on the effects of the different axial gap over the stage performances are reported.

scholarly journals The drag-adjoint field of a circular cylinder wake at Reynolds numbers 20, 100 and 500

2013 ◽  
Vol 730 ◽  
pp. 145-161 ◽  
Author(s):  
Qiqi Wang ◽  
Jun-Hui Gao
Keyword(s):  
Circular Cylinder ◽  
Flow Field ◽  
Unsteady Flow ◽  
Numerical Solutions ◽  
Reynolds Numbers ◽  
Adjoint Equations ◽  
Cylinder Wake ◽  
Near Wake ◽  
Navier Stokes Equation ◽  
D 20

AbstractThis paper analyses the adjoint solution of the Navier–Stokes equation. We focus on flow across a circular cylinder at three Reynolds numbers, ${\mathit{Re}}_{D} = 20, 100$ and $500$. The quantity of interest in the adjoint formulation is the drag on the cylinder. We use classical fluid mechanics approaches to analyse the adjoint solution, which is a vector field similar to a flow field. Production and dissipation of kinetic energy of the adjoint field is discussed. We also derive the evolution of circulation of the adjoint field along a closed material contour. These analytical results are used to explain three numerical solutions of the adjoint equations presented in this paper. The adjoint solution at ${\mathit{Re}}_{D} = 20$, a viscous steady state flow, exhibits a downstream suction and an upstream jet, the opposite of the expected behaviour of a flow field. The adjoint solution at ${\mathit{Re}}_{D} = 100$, a periodic two-dimensional unsteady flow, exhibits periodic, bean-shaped circulation in the near-wake region. The adjoint solution at ${\mathit{Re}}_{D} = 500$, a turbulent three-dimensional unsteady flow, has complex dynamics created by the shear layer in the near wake. The magnitude of the adjoint solution increases exponentially at the rate of the first Lyapunov exponent. These numerical results correlate well with the theoretical analysis presented in this paper.

Sign in / Sign up

Export Citation Format

Share Document