Effect of Ni-coated short carbon fibers on the mechanical and electrical properties of epoxy composites

2013 ◽  
Vol 14 (9) ◽  
pp. 1515-1520 ◽  
Author(s):  
Weiwei Li ◽  
Lei Liu ◽  
Bin Shen
Keyword(s):  
Electrical Properties ◽  
Carbon Fibers ◽  
Epoxy Composites ◽  
Mechanical And Electrical Properties ◽  
Short Carbon

Effect of Cu-coated short carbon fibers on the mechanical and electrical properties of the epoxy composites

2012 ◽  
Vol 20 (4) ◽  
pp. 366-371 ◽  
Author(s):  
Weiwei Li ◽  
Lei Liu ◽  
Bin Shen ◽  
Yating Wu ◽  
Wenbin Hu
Keyword(s):  
Electrical Properties ◽  
Carbon Fibers ◽  
Epoxy Composites ◽  
Mechanical And Electrical Properties ◽  
Short Carbon

scholarly journals Thermo-mechanical behavior of epoxy composite reinforced by carbon and Kevlar fiber

2018 ◽  
Vol 225 ◽  
pp. 01022
Author(s):  
Falak O. Abasi ◽  
Raghad U. Aabass
Keyword(s):  
Mechanical Properties ◽  
Carbon Fiber ◽  
Flexural Strength ◽  
Carbon Fibers ◽  
Epoxy Composites ◽  
Fiber Reinforced ◽  
Fiber Loading ◽  
Kevlar Fiber ◽  
Carbon Fiber Reinforced ◽  
Short Carbon

Newer manufacturing techniques were invented and introduced during the last few decades; some of them were increasingly popular due to their enhanced advantages and ease of manufacturing over the conventional processes. Polymer composite material such as glass, carbon and Kevlar fiber reinforced composite are popular in high performance and light weight applications such as aerospace and automobile fields. This research has been done by reinforcing the matrix (epoxy) resin with two kinds of the reinforcement fibers. One weight fractions were used (20%) wt., Epoxy reinforced with chopped carbon fiber and second reinforcement was epoxy reinforced with hybrid reinforcements Kevlar fiber and improved one was the three laminates Kevlar fiber and chopped carbon fibers reinforced epoxy resin. After preparation of composite materials some of the mechanical properties have been studied. Four different fiber loading, i.e., 0 wt. %, 20wt. % CCF, 20wt. % SKF, AND 20wt. %CCF + 20wt. % SKF were taken for evaluating the above said properties. The thermal and mechanical properties, i.e., hardness load, impact strength, flexural strength (bending load), and thermal conductivity are determined to represent the behaviour of composite structures with that of fibers loading. The results show that with the increase in fiber loading the mechanical properties of carbon fiber reinforced epoxy composites increases as compared to short carbon fiber reinforced epoxy composites except in case of hardness, short carbon fiber reinforced composites shows better results. Similarly, flexural strength test, Impact test, and Brinell hardness test the results show the flexural strength, impact strength of the hybrid composites values were increased with existence of Kevlar fibers, while the hardness was decrease. But the reinforcement with carbon fibers increases the hardness and decreases other tests.

Pitch-based carbon fibers: preparation and applications

2021 ◽  
Vol 19 (3) ◽  
pp. 159-169
Author(s):  
B. B. Kaidar ◽  
G.T. Smagulova ◽  
A.A. Imash ◽  
S. Zhaparkul ◽  
Z.A. Mansurov
Keyword(s):  
Composite Materials ◽  
Electrical Properties ◽  
Carbon Fibers ◽  
Storage Systems ◽  
Raw Materials ◽  
Coal Tar ◽  
Commercial Use ◽  
Mechanical And Electrical Properties ◽  
Reinforced Composite ◽  
The Cost

Attention to carbon fiber (CF) conditioned by their unique physicochemical, mechanical and electrical properties, which makes them in demand in various fields of activity. Today there are several kinds of carbon fibers, most of which (about 90%) are made of polyacrylonitrile (PAN). Despite the fact that carbon fibers are produced from several types of different precursors, their widespread commercial use is limited by the high cost of the product. Has, many research and engineering group seek to reduce the cost of production by using cheap carbon raw materials. A likely solution to this problem is the exploitation of coal, petroleum and coal tar as an effective progenitor for CF production. This review discusses neoteric accomplishment in CF synthesis using various carbon pitches. The possibility of obtaining carbon fibers based on resin with the addition of PAN is presented, and the prospects for their use in energy storage systems and various reinforced composite materials are described in detail.

Improving the Curing and Mechanical Properties of Short Carbon Fibers/Epoxy Composites by Grafting Nano ZIF‐8 on Fibers

2019 ◽  
Vol 7 (2) ◽  
pp. 1901490 ◽  
Author(s):  
Yixing Zhan ◽  
Yating Wang ◽  
Ming Wang ◽  
Xiaoqing Ding ◽  
Xinlong Wang
Keyword(s):  
Mechanical Properties ◽  
Carbon Fibers ◽  
Epoxy Composites ◽  
Short Carbon
Sign in / Sign up

Export Citation Format

Share Document