scholarly journals An integrated workflow to perform reservoir and completion parametric study on a shale gas reservoir

2020 ◽  
Vol 10 (4) ◽  
pp. 1497-1510
Author(s):  
Mohamed Mahmoud ◽  
Ahmed Aleid ◽  
Abdulwahab Ali ◽  
Muhammad Shahzad Kamal
Keyword(s):  
Shale Gas ◽  
Gas Production ◽  
Production Performance ◽  
Analytical Models ◽  
Well Performance ◽  
Short Term ◽  
Gas Reservoirs ◽  
Shale Gas Reservoirs ◽  
The Impact

AbstractThe main objectives of this paper are to assess the long-term and short-term production based on both reservoir parameters and completion parameters of shale gas reservoirs. The effects of the reservoir parameters (permeability and the initial reservoir pressure) and completion parameters (fracture geometry, stimulated reservoir volume, etc.) on the short-term and long-term production of shale gas reservoirs were investigated. The currently used approach relies mainly on the decline curve analysis or analogs from a similar shale play to forecast the gas production from shale gas reservoirs. Both these approaches are not satisfactory because they are calibrated on short production history and do not assess the impact of uncertainty in reservoir and well data. For the first time, this study integrates initial production analysis, probabilistic evaluation, and sensitivity analysis to develop a robust workflow that will help in designing a sustainable production from shale gas plays. The reservoir and completion parameters were collected from different available resources, and the probability distributions of gathered uncertain data were defined. Then analytical models were used to forecast the production. Two well evaluation results are presented in this paper. Based on the results, completion parameters affected the short-term and long-term production, while the reservoir parameters controlled the long-term production. Long-term well performance was mainly controlled by the fracture half-length and fracture height, whereas other completion and reservoir parameters have an insignificant effect. Stimulation treatment design defines the initial well performance, while well placement decision defines well long-term performance. The findings of this study would help in better understanding the production performance of shale gas reservoirs, maximizing production by selecting effective completion parameters and considering the governing reservoir parameters. Moreover, it would help in accomplishing more effective stimulation treatments and define the potentiality of the basin.

scholarly journals Simulation Study to Evaluate the Impact of Fracture Parameters on Shale Gas Productivity

2020 ◽  
Vol 39 (2) ◽  
pp. 432-442
Author(s):  
Abdul Majeed Shar ◽  
Waheed Ali Abro ◽  
Aftab Ahmed Mahesar ◽  
Kun Sang Lee
Keyword(s):  
Shale Gas ◽  
Gas Production ◽  
Simulation Software ◽  
Production Performance ◽  
Gas Reservoirs ◽  
Gas Reservoir ◽  
Shale Gas Reservoir ◽  
Fracture Parameters ◽  
Shale Gas Reservoirs ◽  
The Impact

The production from shale gas reservoirs has significantly increased due to technological advancements. The shale gas reservoirs are very heterogeneous and the heterogeneity has a significant effect on the quality and productivity of reservoirs. Hence, it is essential to study the behavior of such reservoirs for accurate modelling and performance prediction. To evaluate the impact of fracture parameters on shale gas reservoir productivity using CMG (Computer Modelling Group) stars simulation software was the main objective of this study. In this paper, a comprehensive analysis considering an example shale gas reservoir was conducted for production performance analysis considering uniform and non-uniform fractures configurations. Several simulations were performed by considering the multi-stage hydraulically fractured reservoir. The sensitivities conducted includes the different cases of moderate and severe heterogeneity along with variable fractures half-length, effect of changing fracture spacing, variable fracture conductivities. The simulation results showed that by increasing conductivity of fracture increases the gas production rate significantly. Moreover, cases of reservoir permeability heterogeneity were analyzed which show the significant effect on gas rate and on cumulative gas production. The results of this study can be used to improve the effectiveness in designing and developing of shale gas reservoirs and also to improve the accuracy of analyzing heterogeneous shale gas reservoir performance.

scholarly journals Investigation of the Main Factors During Shale-gas Production Using Grey Relational Analysis

2016 ◽  
Vol 9 (1) ◽  
pp. 207-215 ◽  
Author(s):  
Hongling Zhang ◽  
Jing Wang ◽  
Haiyong Zhang
Keyword(s):  
Shale Gas ◽  
Gas Production ◽  
Gas Reservoirs ◽  
Fracture Conductivity ◽  
Matrix Permeability ◽  
Shale Gas Reservoirs ◽  
Main Factors ◽  
Grey Relational ◽  
The Impact ◽  
Half Length

Shale gas is one of the primary types of unconventional reservoirs to be exploited in search for long-lasting resources. Production from shale gas reservoirs requires horizontal drilling with hydraulic fracturing to achieve the most economic production. However, plenty of parameters (e.g., fracture conductivity, fracture spacing, half-length, matrix permeability, and porosity,etc) have high uncertainty that may cause unexpected high cost. Therefore, to develop an efficient and practical method for quantifying uncertainty and optimizing shale-gas production is highly desirable. This paper focuses on analyzing the main factors during gas production, including petro-physical parameters, hydraulic fracture parameters, and work conditions on shale-gas production performances. Firstly, numerous key parameters of shale-gas production from the fourteen best-known shale gas reservoirs in the United States are selected through the correlation analysis. Secondly, a grey relational grade method is used to quantitatively estimate the potential of developing target shale gas reservoirs as well as the impact ranking of these factors. Analyses on production data of many shale-gas reservoirs indicate that the recovery efficiencies are highly correlated with the major parameters predicted by the new method. Among all main factors, the impact ranking of major factors, from more important to less important, is matrix permeability, fracture conductivity, fracture density of hydraulic fracturing, reservoir pressure, total organic content (TOC), fracture half-length, adsorbed gas, reservoir thickness, reservoir depth, and clay content. This work can provide significant insights into quantifying the evaluation of the development potential of shale gas reservoirs, the influence degree of main factors, and optimization of shale gas production.

scholarly journals The Evaluation and Sensitivity of Decline Curve Modelling

Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2765
Author(s):  
Prinisha Manda ◽  
Diakanua Nkazi
Keyword(s):  
Shale Gas ◽  
Goodness Of Fit ◽  
Accuracy Assessment ◽  
Gas Production ◽  
Production Performance ◽  
Logistic Growth ◽  
Gas Reservoirs ◽  
Shale Gas Reservoirs ◽  
Decline Curve ◽  
Exponential Decline

The development of prediction tools for production performance and the lifespan of shale gas reservoirs has been a focus for petroleum engineers. Several decline curve models have been developed and compared with data from shale gas production. To accurately forecast the estimated ultimate recovery for shale gas reservoirs, consistent and accurate decline curve modelling is required. In this paper, the current decline curve models are evaluated using the goodness of fit as a measure of accuracy with field data. The evaluation found that there are advantages in using the current DCA models; however, they also have limitations associated with them that have to be addressed. Based on the accuracy assessment conducted on the different models, it appears that the Stretched Exponential Decline Model (SEDM) and Logistic Growth Model (LGM), followed by the Extended Exponential Decline Model (EEDM), the Power Law Exponential Model (PLE), the Doung’s Model, and lastly, the Arps Hyperbolic Decline Model, provide the best fit with production data.

Numerical Simulation of Shale Gas Production

2011 ◽  
Vol 402 ◽  
pp. 804-807 ◽  
Author(s):  
Song Ru Mu ◽  
Shi Cheng Zhang
Keyword(s):  
Shale Gas ◽  
Simulation Models ◽  
Fracture Network ◽  
Gas Production ◽  
Wire Mesh ◽  
Well Performance ◽  
Gas Reservoirs ◽  
Shale Gas Reservoirs ◽  
Shale Reservoirs ◽  
Fracture Mapping

Shale gas reservoirs require a large fracture network to maximize well performance. Microseismic fracture mapping has shown that large fracture networks can be generated in many shale reservoirs. The application of microseismic fracture mapping measurements requires estimation of the structure of the complex hydraulic fracture or the volume of the reservoir that has been stimulated by the fracture treatment. There are three primary approaches used to incorporate microseismic measurements into reservoir simulation models: discrete modeling of the complex fracture network, wire-mesh model, and dual porosity model. This paper discuss the different simulation model, the results provided insights into effective stimulation designs and flow mechanism for shale gas reservoirs.

scholarly journals An Analytical Flow Model for Heterogeneous Multi-Fractured Systems in Shale Gas Reservoirs

Energies ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 3422 ◽  
Author(s):  
Honghua Tao ◽  
Liehui Zhang ◽  
Qiguo Liu ◽  
Qi Deng ◽  
Man Luo ◽  
...  
Keyword(s):  
Fractal Dimension ◽  
Anomalous Diffusion ◽  
Shale Gas ◽  
Gas Production ◽  
Gas Reservoirs ◽  
Pressure Transient ◽  
Mass Fractal ◽  
Shale Gas Reservoirs ◽  
Mass Fractal Dimension ◽  
The Impact

The use of multiple hydraulically fractured horizontal wells has been proven to be an efficient and effective way to enable shale gas production. Meanwhile, analytical models represent a rapid evaluation method that has been developed to investigate the pressure-transient behaviors in shale gas reservoirs. Furthermore, fractal-anomalous diffusion, which describes a sub-diffusion process by a non-linear relationship with time and cannot be represented by Darcy’s law, has been noticed in heterogeneous porous media. In order to describe the pressure-transient behaviors in shale gas reservoirs more accurately, an improved analytical model based on the fractal-anomalous diffusion is established. Various diffusions in the shale matrix, pressure-dependent permeability, fractal geometry features, and anomalous diffusion in the stimulated reservoir volume region are considered. Type curves of pressure and pressure derivatives are plotted, and the effects of anomalous diffusion and mass fractal dimension are investigated in a sensitivity analysis. The impact of anomalous diffusion is recognized as two opposite aspects in the early linear flow regime and after that period, when it changes from 1 to 0.75. The smaller mass fractal dimension, which changes from 2 to 1.8, results in more pressure and a drop in the pressure derivative.

Key Factors in Shale Gas Modeling and Simulation

2014 ◽  
Vol 59 (4) ◽  
pp. 987-1004 ◽  
Author(s):  
Łukasz Klimkowski ◽  
Stanisław Nagy
Keyword(s):  
Shale Gas ◽  
Gas Production ◽  
Production Performance ◽  
Hydraulic Fractures ◽  
Well Performance ◽  
Key Factors ◽  
Gas Well ◽  
Well Production ◽  
Multi Stage ◽  
The Impact

Abstract Multi-stage hydraulic fracturing is the method for unlocking shale gas resources and maximizing horizontal well performance. Modeling the effects of stimulation and fluid flow in a medium with extremely low permeability is significantly different from modeling conventional deposits. Due to the complexity of the subject, a significant number of parameters can affect the production performance. For a better understanding of the specifics of unconventional resources it is necessary to determine the effect of various parameters on the gas production process and identification of parameters of major importance. As a result, it may help in designing more effective way to provide gas resources from shale rocks. Within the framework of this study a sensitivity analysis of the numerical model of shale gas reservoir, built based on the latest solutions used in industrial reservoir simulators, was performed. The impact of different reservoir and hydraulic fractures parameters on a horizontal shale gas well production performance was assessed and key factors were determined.

Study Evaluates Fracturing Interference for Multiwell Pads in Shale Gas Reservoirs

2021 ◽  
Vol 73 (08) ◽  
pp. 67-68
Author(s):  
Chris Carpenter
Keyword(s):  
Hydraulic Fracturing ◽  
Shale Gas ◽  
Technical Conference ◽  
Gas Production ◽  
Gas Reservoirs ◽  
Well Drilling ◽  
Recovery Potential ◽  
Shale Gas Reservoirs ◽  
Well Spacing ◽  
Southwest Region

This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper SPE 201694, “Interwell Fracturing Interference Evaluation of Multiwell Pads in Shale Gas Reservoirs: A Case Study in WY Basin,” by Youwei He, SPE, Jianchun Guo, SPE, and Yong Tang, Southwest Petroleum University, et al., prepared for the 2020 SPE Annual Technical Conference and Exhibition, originally scheduled to be held in Denver, Colorado, 5–7 October. The paper has not been peer reviewed. The paper aims to determine the mechanisms of fracturing interference for multiwell pads in shale gas reservoirs and evaluate the effect of interwell fracturing interference on production. Field data of 56 shale gas wells in the WY Basin are applied to calculate the ratio of affected wells to newly fractured wells and understand its influence on gas production. The main controlling factors of fracturing interference are determined, and the interwell fracturing interacting types are presented. Production recovery potential for affected wells is analyzed, and suggestions for mitigating fracturing interference are proposed. Interwell Fracturing Interference Evaluation The WY shale play is in the southwest region of the Sichuan Basin, where shale gas reserves in the Wufeng-Longmaxi formation are estimated to be the highest in China. The reservoir has produced hydrocarbons since 2016. Infill well drilling and massive hydraulic fracturing operations have been applied in the basin. Each well pad usually is composed of six to eight multifractured horizontal wells (MFHWs). Well spacing within one pad, or the distance between adjacent well pads, is so small that fracture interference can occur easily between infill wells and parent wells. Fig. 1 shows the number of wells affected by in-fill well fracturing from 2016 to 2019 in the basin. As the number of newly drilled wells increased between 2017 and 2019, the number of wells affected by hydraulic fracturing has greatly increased. The number of wells experiencing fracturing interaction has reached 65 in the last 4 years at the time of writing.

Sign in / Sign up

Export Citation Format

Share Document