Purpose
– The purpose of this paper is to introduce a novel method for developing static aeroelastic models based on rapid prototyping for wind tunnel testing.
Design/methodology/approach
– A metal frame and resin covers are applied to a static aeroelastic wind tunnel model, which uses the difference of metal and resin to achieve desired stiffness distribution by the stiffness similarity principle. The metal frame is made by traditional machining, and resin covers are formed by stereolithgraphy. As demonstrated by wind tunnel testing and stiffness measurement, the novel method of design and fabrication of the static aeroelastic model based on stereolithgraphy is practical and feasible, and, compared with that of the traditional static elastic model, is prospective due to its lower costs and shorter period for its design and production, as well as avoiding additional stiffness caused by outer filler.
Findings
– This method for developing static aeroelastic wind tunnel model with a metal frame and resin covers is feasible, especially for aeroelastic wind tunnel models with complex external aerodynamic shape, which could be accurately constructed based on rapid prototypes in a shorter time with a much lower cost. The developed static aeroelastic aircraft model with a high aspect ratio shows its stiffness distribution in agreement with the design goals, and it is kept in a good condition through the wind tunnel testing at a Mach number ranging from 0.4 to 0.65.
Research limitations/implications
– The contact stiffness between the metal frame and resin covers is difficult to calculate accurately even by using finite element analysis; in addition, the manufacturing errors have some effects on the stiffness distribution of aeroelastic models, especially for small-size models.
Originality/value
– The design, fabrication and ground testing of aircraft static aeroelastic models presented here provide accurate stiffness and shape stimulation in a cheaper and sooner way compared with that of traditional aeroelastic models. The ground stiffness measurement uses the photogrammetry, which can provide quick, and precise, evaluation of the actual stiffness distribution of a static aeroelastic model. This study, therefore, expands the applications of rapid prototyping on wind tunnel model fabrication, especially for the practical static aeroelastic wind tunnel tests.
Inter-Facility Correlations of Transonic Test Results of the AGARD-C Standard Wind-Tunnel Model
