Development of Smart Water Supply System for University Water Supply Through Automation and Real-Time Operations

2020 ◽  
Vol 101 (5) ◽  
pp. 497-510
Author(s):  
Sanjay N. Huse ◽  
Ravindra D. Kale ◽  
V. P. Dhote
2021 ◽  
Vol 13 (11) ◽  
pp. 6056
Author(s):  
Kang-Min Koo ◽  
Kuk-Heon Han ◽  
Kyung-Soo Jun ◽  
Gyu-Min Lee ◽  
Jung-Sik Kim ◽  
...  

It is crucial to forecast the water demand accurately for supplying water efficiently and stably in a water supply system. In particular, accurately forecasting short-term water demand helps in saving energy and reducing operating costs. With the introduction of the Smart Water Grid (SWG) in a water supply system, the amount of water consumption is obtained in real-time through a smart meter, which can be used for forecasting the short-term water demand. The models widely used for water demand forecasting include Autoregressive Integrated Moving Average, Radial Basis Function-Artificial Neural Network, Quantitative Multi-Model Predictor Plus, and Long Short-Term Memory. However, there is a lack of research on assessing the performance of models and forecasting the short-term water demand in the SWG demonstration plant. Therefore, in this study, the short-term water demand was forecasted for each model using the data collected from a smart meter, and the performance of each model was assessed. The Smart Water Grid Research Group installed a smart meter in block 112 located in YeongJong Island, Incheon, and the actual data used for operating the SWG demonstration plant were adopted. The performance of the model was assessed by using the Residual, Root Mean Square Error, Normalized Root Mean Square Error, Nash–Sutcliffe Efficiency, and Pearson Correlation Coefficient as indices. As a result of water demand forecasting, it is difficult to forecast water demand only by time and water consumption. Therefore, as the short-term water demand forecasting models using only time and the amount of water consumption have limitations in reflecting the characteristics of consumers, a water supply system can be managed more precisely if other factors (weather, customer behavior, etc.) influencing the water demand are applied.


Author(s):  
Kang Min Koo ◽  
Kuk Heon Han ◽  
Kyung Soo Jun ◽  
Gyumin Lee ◽  
Jung Sik Kim ◽  
...  

It is crucial to forecast the water demand accurately for supplying water efficiently and stably in a water supply system. In particular, accurately forecasting short-term water demand helps in saving energy and reducing operating costs. With the introduction of the Smart Water Grid (SWG) in a water supply system, the amount of water consumption is obtained in real time through an advanced metering infrastructure (AMI) sensor, which can be used for forecasting the short-term water demand. The models widely used for water demand forecasting include the autoregressive integrated moving average, radial basis function-artificial neural network, quantitative multi-model predictor plus, and long short-term memory. However, there is a lack of research on assessing the performance of models and forecasting the short-term water demand by applying the data on the amount of water consumption by purpose and the pipe diameter of an end-use level of the SWG demonstration plant in each demand forecasting model. Therefore, in this study, the short-term water demand was forecasted for each model using the data collected from the AMI, and the performance of each model was assessed. The Smart Water Grid Research Group installed ultrasonic-wave-type AMI sensors in the block 112 located in YeongJong Island, Incheon, and the actual data used for operating the SWG demonstration plant were adopted. The performance of the model was assessed by using the residual, root mean square error (RMSE), normalized root mean square error (NRMSE), Nash–Sutcliffe efficiency (NSE), and Pearson correlation coefficient (PCC) as indices. The water demand forecast was slightly underestimated in models that employed the assessment results based on the RMSE and NRMSE. Furthermore, the forecasting accuracy was low for the NSE due to a large number of negative values; the correlation between the observed and forecasted values of the PCC was not high, and it was difficult to forecast the peak amount of water consumption. Therefore, as the short-term water demand forecasting models using only time and the amount of water consumption have limitations in reflecting the characteristics of consumers, a water supply system can be managed more precisely if other factors (weather, customer behavior, etc.) influencing the water demand are applied.


10.29007/7k9l ◽  
2018 ◽  
Author(s):  
Sofia Fellini ◽  
Riccardo Vesipa ◽  
Fulvio Boano ◽  
Luca Ridolfi

This work presents an algorithm for real-time fault detection in the SCADA system of a modern water supply system (WSS) in an Italian Alpine Valley. By means of both hardware and analytical redundancy, the proposed algorithm compares data and isolates faults on sensors through the residual analysis. Moreover, the algorithm performs a real- time selection of the most reliable measurements for the automated control of the WSS operations. A coupled model of the hydraulic and remote-control system was developed to test the effectiveness of the proposed algorithm. Simulations showed that error detection and measurement assessment are crucial for the safe operation of the WSS.


2019 ◽  
Vol 22 (1) ◽  
pp. 132-147 ◽  
Author(s):  
Sofia Fellini ◽  
Riccardo Vesipa ◽  
Fulvio Boano ◽  
Luca Ridolfi

Abstract This work presents an algorithm for real-time fault detection in the SCADA system of a modern water supply system (WSS) in an Italian alpine valley. By means of both hardware and analytical redundancy, the proposed algorithm compares data and isolates faults on sensors through analysis of residuals. Moreover, the algorithm performs a real-time selection of the most reliable measurements for the automated control of the WSS operations. A coupled model of the hydraulic and remote-control system is developed to test the performance of the WSS when the proposed algorithm is applied or not. Simulations show that the occurrence of errors in the sensors causes significant worsening in the economic, energy and mechanical performance of the infrastructure. In many cases, the operations of the WSS are seriously compromised. The error detection and measurement assessment performed by the proposed algorithm proves to be crucial for the safe control of the WSS.


Author(s):  
R. Farmani ◽  
P. Ingeduld ◽  
D. Savic ◽  
G. Walters ◽  
Z. Svitak ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document