Simulation of a Bubble-Column Reactor by Three-Dimensional CFD: Multidimension- and Function-Adaptive Network-Based Fuzzy Inference System

2019 ◽  
Vol 22 (2) ◽  
pp. 477-490 ◽  
Author(s):  
Erlin Tian ◽  
Meisam Babanezhad ◽  
Mashallah Rezakazemi ◽  
Saeed Shirazian
RSC Advances ◽  
2015 ◽  
Vol 5 (104) ◽  
pp. 85652-85672 ◽  
Author(s):  
M. Pourtousi ◽  
Mohammadjavad Zeinali ◽  
P. Ganesan ◽  
J. N. Sahu

This work presents a combination of Computational Fluid Dynamics (CFD) and Adaptive Network-based Fuzzy Inference System (ANFIS) developed for flow characterization inside a cylindrical bubble column reactor.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Meisam Babanezhad ◽  
Iman Behroyan ◽  
Ali Taghvaie Nakhjiri ◽  
Azam Marjani ◽  
Mashallah Rezakazemi ◽  
...  

AbstractHerein, a reactor of bubble column type with non-equilibrium thermal condition between air and water is mechanistically modeled and simulated by the CFD technique. Moreover, the combination of the adaptive network (AN) trainer with the fuzzy inference system (FIS) as the artificial intelligence method calling ANFIS has already shown potential in the optimization of CFD approach. Although the artificial intelligence method of particle swarm optimization (PSO) algorithm based fuzzy inference system (PSOFIS) has a good background for optimizing the other fields of research, there are not any investigations on the cooperation of this method with the CFD. The PSOFIS can reduce all the difficulties and simplify the investigation by elimination of the additional CFD simulations. In fact, after achieving the best intelligence, all the predictions can be done by the PSOFIS instead of the massive computational efforts needed for CFD modeling. The first aim of this study is to develop the PSOFIS for use in the CFD approach application. The second one is to make a comparison between the PSOFIS and ANFIS for the accurate prediction of the CFD results. In the present study, the CFD data are learned by the PSOFIS for prediction of the water velocity inside the bubble column. The values of input numbers, swarm sizes, and inertia weights are investigated for the best intelligence. Once the best intelligence is achieved, there is no need to mesh refinement in the CFD domain. The mesh density can be increased, and the newer predictions can be done in an easier way by the PSOFIS with much less computational efforts. For a strong verification, the results of the PSOFIS in the prediction of the liquid velocity are compared with those of the ANFIS. It was shown that for the same fuzzy set parameters, the PSOFIS predictions are closer to the CFD in comparison with the ANFIS. The regression number (R) of the PSOFIS (0.98) was a little more than that of the ANFIS (0.97). The PSOFIS showed a powerful potential in mesh density increment from 9477 to 774,468 and accurate predictions for the new nodes independent of the CFD modeling.


2021 ◽  
pp. 004051752110205
Author(s):  
Xueqing Zhao ◽  
Ke Fan ◽  
Xin Shi ◽  
Kaixuan Liu

Virtual reality is a technology that allows users to completely interact with a computer-simulated environment, and put on new clothes to check the effect without taking off their clothes. In this paper, a virtual fit evaluation of pants using the Adaptive Network Fuzzy Inference System (ANFIS), VFE-ANFIS for short, is proposed. There are two stages of the VFE-ANFIS: training and evaluation. In the first stage, we trained some key pressure parameters by using the VFE-ANFIS; these key pressure parameters were collected from real try-on and virtual try-on of pants by users. In the second stage, we evaluated the fit by using the trained VFE-ANFIS, in which some key pressure parameters of pants from a new user were determined and we output the evaluation results, fit or unfit. In addition, considering the small number of input samples, we used the 10-fold cross-validation method to divide the data set into a training set and a testing set; the test accuracy of the VFE-ANFIS was 94.69% ± 2.4%, and the experimental results show that our proposed VFE-ANFIS could be applied to the virtual fit evaluation of pants.


2011 ◽  
Vol 383-390 ◽  
pp. 1062-1070
Author(s):  
Adeel H. Suhail ◽  
N. Ismail ◽  
S.V. Wong ◽  
N.A. Abdul Jalil

The selection of machining parameters needs to be automated, according to its important role in machining process. This paper proposes a method for cutting parameters selection by fuzzy inference system generated using fuzzy subtractive clustering method (FSCM) and trained using an adaptive network based fuzzy inference system (ANFIS). The desired surface roughness (Ra) was entered into the first step as a reference value for three fuzzy inference system (FIS). Each system determine the corresponding cutting parameters such as (cutting speed, feed rate, and depth of cut). The interaction between these cutting parameters were examined using new sets of FIS models generated and trained for verification purpose. A new surface roughness value was determined using the cutting parameters resulted from the first steps and fed back to the comparison unit and was compared with the desired surface roughness and the optimal cutting parameters ( which give the minimum difference between the actual and predicted surface roughness were find out). In this way, single input multi output ANFIS architecture presented which can identify the cutting parameters accurately once the desired surface roughness is entered to the system. The test results showed that the proposed model can be used successfully for machinability data selection and surface roughness prediction as well.


Sign in / Sign up

Export Citation Format

Share Document