High-temperature-resistant barium strontium titanate @Ag/poly(arylene ether nitrile) composites with enhanced dielectric performance and high mechanical strength

Author(s):  
Zili Tang ◽  
Junsong Xia ◽  
Hang Yin ◽  
Guanghui Fu ◽  
Xitong Ai ◽  
...  
2011 ◽  
Vol 687 ◽  
pp. 427-432
Author(s):  
Shan Shan Liu ◽  
Yu Zhen Zhao ◽  
Xi Lin Wang ◽  
He Ping Zhou

Barium-strontium titanate Ba1-xSrxTiO3[0≤x≤1] has been investigated for tunable microwave application due to their high permittivity, low losses and high tunability. The influence of MgF2additives on the dielectric performance of Ba0.6Sr0.4TiO3(BSTO) were investigated in this paper. MgF2doped BSTO ceramics were prepared using the conventional mixed oxide techniques. The phase structure, microstructure and dielectric properties of MgF2doped BSTO ceramics were studied. The XRD patterns showed that all the samples exhibit a perovskite phase. A secondary phase of MgO was observed with excessive MgF2additives. The grain size of MgF2doped BSTO ceramics was slightly increased with the increasing of MgF2additives, while the distributed porosity was concentrated to get larger. The relative permittivity, dielectric loss and tunability were decreased accordingly. The relative permittivity was reduced from 3717 (pure Ba0.6Sr0.4TiO3) to 680 (6 wt % MgF2doped BSTO), while the tunability changed from 51.7 % to 6.5 %. The dielectric losses were decreased from 0.004 to less than 0.001. The Curie temperature of MgF2doped BSTO was first decreased with the additives of MgF2(x<2 wt %) then remain the same with the rise of MgF2(2≤x≤6) content.


2014 ◽  
Vol 116 (14) ◽  
pp. 144103 ◽  
Author(s):  
Shiguang Yan ◽  
Chaoliang Mao ◽  
Genshui Wang ◽  
Chunhua Yao ◽  
Fei Cao ◽  
...  

Frequenz ◽  
2008 ◽  
Vol 62 (3-4) ◽  
Author(s):  
A. Giere ◽  
X. Zhou ◽  
F. Paul ◽  
M. Sazegar ◽  
Y. Zheng ◽  
...  

Alloy Digest ◽  
2009 ◽  
Vol 58 (8) ◽  

Abstract DMV 59 is the material of choice for a wide variety of applications where significant corrosion resistance and high mechanical strength is necessary. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-672. Producer or source: Mannesmann DMV Stainless USA Inc.


2007 ◽  
Vol 52 (11) ◽  
pp. 1300-1304 ◽  
Author(s):  
Vas. M. Mukhortov ◽  
S. I. Masychev ◽  
Yu. I. Golovko ◽  
A. V. Chub ◽  
Vl. M. Mukhortov

Sign in / Sign up

Export Citation Format

Share Document