Measurement of rock movements around deep mine roadways driven in soft rock - A case study of Yubari new coal mine

Keyword(s):  
2021 ◽  
Vol 115 ◽  
pp. 104053
Author(s):  
Bin Tang ◽  
Mathias Yeboah ◽  
Hua Cheng ◽  
Yongzhi Tang ◽  
Zhishu Yao ◽  
...  

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Chaowen Hu ◽  
Xiaojie Yang ◽  
Ruifeng Huang ◽  
Xingen Ma

As the mining depth increases, under the influence of high ground stress, the surrounding rock of deep mine roadways shows soft rock characteristics. Under the influence of mining disturbance at the working face, large deformation of the roadway has occurred. To control the large deformation of the roadway, many mines have adopted the form of combined support, which has continuously increased the support strength and achieved a certain effect. However, since the stress environment of the surrounding rock of the roadway has not been changed, large deformation of the roadway still occurs in many cases. Based on the theoretical basis of academician Manchao He’s “short cantilever beam by roof cutting,” this paper puts forward the plan of “presplitting blasting + combined support” to control the large deformation of the deep mine roadways. Without changing the original support conditions of the roadway, presplitting blasting the roof strata of the roadway, by cutting off the mechanical connection of the roof strata between the roadway and gob, improves the stress distribution of the roadway to control the large deformation. Through field tests, the results show that after presplitting blasting the roadway roof, the roadway roof subsidence is reduced by 47.9%, the ribs displacement is reduced by 45.7%, and the floor heave volume is reduced by 50.8%. The effect is significant.


2015 ◽  
Vol 2015 ◽  
pp. 1-14 ◽  
Author(s):  
Bangyou Jiang ◽  
Lianguo Wang ◽  
Yinlong Lu ◽  
Shitan Gu ◽  
Xiaokang Sun

This paper presented a case study of the failure mechanisms and support design for deep composite soft rock roadway in the Yangcheng Coal Mine of China. Many experiments and field tests were performed to reveal the failure mechanisms of the roadway. It was found that the surrounding rock of the roadway was HJS complex soft rock that was characterized by poor rock quality, widespread development of joint fissures, and an unstable creep property. The major horizontal stress, which was almost perpendicular to the roadway, was 1.59 times larger than the vertical stress. The weak surrounding rock and high tectonic stress were the main internal causes of roadway instabilities, and the inadequate support was the external cause. Based on the failure mechanism, a new support design was proposed that consisted of bolting, cable, metal mesh, shotcrete, and grouting. A field experiment using the new design was performed in a roadway section approximately 100 m long. Detailed deformation monitoring was conducted in the experimental roadway sections and sections of the previous roadway. The monitoring results showed that deformations of the roadway with the new support design were reduced by 85–90% compared with those of the old design. This successful case provides an important reference for similar soft rock roadway projects.


2017 ◽  
Vol 217 ◽  
pp. 89-101 ◽  
Author(s):  
Sheng-Qi Yang ◽  
Miao Chen ◽  
Hong-Wen Jing ◽  
Kun-Fu Chen ◽  
Bo Meng

Sign in / Sign up

Export Citation Format

Share Document