Torsion load transfer problem for a class of non-homogeneous elastic soils

1996 ◽  
Vol 24 (4) ◽  
pp. 321-338 ◽  
Author(s):  
J. Padovan

Abstract This paper investigates the cord-matrix load transfer problem in twisted cord-rubber composites. The central feature of the study is to ascertain the polarizing effects of twist-induced coupling of the axial loads and torque. Particular emphasis is given to the end problem, namely the transition between the axial-circumferential shear stress-dominated end region and the axial normal stress and torque-controlled far-from-end zone. This is achieved through the development of both a closed form analytic formulation and its corroboration by a detailed finite element simulation.


2020 ◽  
Vol 34 (11) ◽  
pp. 2050104
Author(s):  
Mingyu Huang ◽  
Li Ding ◽  
Wei Ding ◽  
Tao Lin ◽  
Zhihong Guan

Complex systems are always composed of many subsystems that exhibit interdependent relationship with each others. It becomes increasingly important across many fields to understand the effect of interdependence among these subsystems. In this paper, we consider a novel flow interaction model on a system comprising two networks with initial line loads and capacities. Once a line in one network is subjected to overload failure, its load will be redistributed to the whole system. Based on this model, we study how load transfer due to redistribution affects the dynamic process of failure propagation and the failure outbreak threshold. Furthermore, we solve an optimal load transfer problem to find the minimum cumulative cost on the low failure level. Our results provide theoretical guidance for optimal load scheduling to suppress cascades in the interdependent networks.


1984 ◽  
Vol 8 (4) ◽  
pp. 219-226 ◽  
Author(s):  
P. Karasudhi ◽  
R.K.N.D. Rajapakse ◽  
K.K. Liyanage

This paper is a reconsideration of elastostatic load transfer problem of a long cylindrical elastic bar partially embedded in an elastic half space. Each problem is considered as consisting of two interacting systems, an extended half space and a one-dimensional fictitious bar. A compatibility condition is imposed near the interface of the interacting systems. In order to incorporate the real phenomenon of stress singularities at the ends of the bar, without carrying our a complicated derivation of the stress singularity factor, the basic unknown force at both ends of the fictitious bar is set to zero. However, the effects of the stress singularity are found to be not significant, especially for long bars and when the main concern is only on the force-displacement relationship at the top end of the bar.


1973 ◽  
Vol 40 (4) ◽  
pp. 997-1003 ◽  
Author(s):  
F. Erdogan ◽  
G. D. Gupta

The following load transfer problems are considered in this paper: torque transfer between an elastic shaft and a finite elastic disk or sleeve of different materials, torque transfer between two identical shafts coupled through a finite sleeve, and torque transfer between two dissimilar shafts coupled through a finite sleeve. In all cases it is assumed that the contact between the sleeve and the shafts is one of perfect adhesion accomplished through bonding or shrink-fit. The problems are shown to reduce to singular integral equations with generalized Cauchy kernels. Some numerical examples are worked out and the stress-intensity factors and distribution of contact stresses are given.


Author(s):  
Nhan Phan-Thien ◽  
Sangtae Kim

The acoustic and mechanical properties of cemented granular materials such as sedimentary rocks are directly related to the load transfer problem between two granules (Stoll). The theoretical description of granular materials has been based on the Hertzian contact problem between two elastic spherical inclusion in an elastic matrix, or its modifications; a review of the contact problem can be found in Johnson. In essence, the deformation problem resulting from a relative displacement between two nearby spherical elastic inclusions is studied, and the load transfer between the two is used to construct a constitutive theory for the particulate solid. In particular, Dvorkin et al. studied the deformation of an elastic layer between two spherical elastic grains, using a two-dimensional plane strain analysis similar to those of Tu and Gazis and Phan-Thien and Karihalo. They concluded that the elastic properties of the cemented system can depend strongly on the length of the cement layer and the stiffness of the cement. The main problem with the method is the assumption that the contribution to the load transfer between the granules comes from the region near contact. The assumption is well justified in the case where the Poisson’s ratio of the cement layer is 0.5 (incompressible), in which case the problem is equivalent to the corresponding Stokes flow problem where exact and asymptotic solutions are available (see, for example, Kim and Karrila). The Stokes asymptotic solution shows that the leading term in the load transfer is of O(є-1), where є is the dimensionless thickness of the cement layer. In the case where the Poisson’s ratio of the elastic layer is less than 0.5, it is not clear that the load is still strongly singular in є, and therefore a local stress analysis in the region of near contact may not necessarily yield an accurate answer, unless є is extremely small. The load transfer problem is pedagogic in that it allows us to demonstrate an effective technique often used in Stokes flow known as the reflection method, which has its basis in Faxén relations (discussed in the previous chapter).


1994 ◽  
Vol 61 (4) ◽  
pp. 971-975 ◽  
Author(s):  
Ven-Gen Lee ◽  
Toshio Mura

Based on the equivalent inclusion method, the load transfer problem of a finite cylindrical fiber embedded in an elastic half-space of different elastic properties is presented. The equivalent condition of inhomogeneity and inclusion problems simulates the fiber to an inclusion with chosen eigenstrains, and the problem is formulated to a set of integral equations with the unknown strength of eigenstrains. A numerical procedure is developed using a discretizing scheme by which the set of integral equations is reduced to a system of algebraic equations.


Author(s):  
Anastasios M. Ioannides ◽  
Michael I. Hammons

On the prominent issue of edge load transfer in portland cement concrete pavements, common understanding has been that Westergaard's last contribution was the very cursory treatment contained in his 1948 paper. A recent examination of the archives at the U.S. Army Engineer Waterways Experiment Station, however, has brought to light a consulting report that Westergaard submitted to the Corps of Engineers in 1949 containing a detailed examination of the edge load transfer problem, prepared by his associate M. S. Skarlatos. To expedite dissemination of this information, the results of an investigation that sought to extend and refine the edge load transfer solution by Skarlatos using modern computational tools are presented. A comparison of this solution to earlier finite element solutions is also presented. Following the same approach as Skarlatos and Westergaard, closed-form equations are derived for the maximum deflection and maximum bending stress occurring on the unloaded side of an edge capable of load transfer. Together with Westergaard's 1948 free edge equations, the two unloaded side formulas effectively extend Westergaard's solutions to the case of the edge load transfer problem.


1970 ◽  
Vol 37 (4) ◽  
pp. 959-964 ◽  
Author(s):  
L. M. Keer ◽  
N. J. Freeman

This paper deals with the axially symmetric torsion of a semi-infinite cylinder embedded into an elastic half space, where the cylinder is allowed to protrude by a finite amount. The problem is formulated to include the case of the protruding portion of the cylinder when it is a different material and partially bonded to the embedded portion. With the use of integral transforms and Dini series, the problem is reduced to the determination of the solution of an integral equation. Stress singularities of a fractional order are noted and computed at the juncture, when all members are perfectly bonded. A numerical solution of the integral equation is obtained for the case of a homogeneous cylinder. The bond stress on the cylinder—half space interface and the torque-twist (and consequently, strain energy) for the entire system are computed for different values of the elastic constants.


Sign in / Sign up

Export Citation Format

Share Document