scholarly journals Pressure Gradient method for solving incompressible Navier-Stokes equations with curvilinear coordinate system

1990 ◽  
Vol 14 ◽  
pp. 732-736
Author(s):  
Cha-Hsiang Tan ◽  
Michael Pecht ◽  
J.C. Duh
2018 ◽  
Vol 59 (3) ◽  
pp. 335-348 ◽  
Author(s):  
J. M. HILL ◽  
Y. M. STOKES

There are many fluid flow problems involving geometries for which a nonorthogonal curvilinear coordinate system may be the most suitable. To the authors’ knowledge, the Navier–Stokes equations for an incompressible fluid formulated in terms of an arbitrary nonorthogonal curvilinear coordinate system have not been given explicitly in the literature in the simplified form obtained herein. The specific novelty in the equations derived here is the use of the general Laplacian in arbitrary nonorthogonal curvilinear coordinates and the simplification arising from a Ricci identity for Christoffel symbols of the second kind for flat space. Evidently, however, the derived equations must be consistent with the various general forms given previously by others. The general equations derived here admit the well-known formulae for cylindrical and spherical polars, and for the purposes of illustration, the procedure is presented for spherical polar coordinates. Further, the procedure is illustrated for a nonorthogonal helical coordinate system. For a slow flow for which the inertial terms may be neglected, we give the harmonic equation for the pressure function, and the corresponding equation if the inertial effects are included. We also note the general stress boundary conditions for a free surface with surface tension. For completeness, the equations for a compressible flow are derived in an appendix.


2006 ◽  
Vol 128 (6) ◽  
pp. 1394-1399 ◽  
Author(s):  
Donghyun You ◽  
Meng Wang ◽  
Rajat Mittal ◽  
Parviz Moin

A novel structured grid approach which provides an efficient way of treating a class of complex geometries is proposed. The incompressible Navier-Stokes equations are formulated in a two-dimensional, generalized curvilinear coordinate system complemented by a third quasi-curvilinear coordinate. By keeping all two-dimensional planes defined by constant third coordinate values parallel to one another, the proposed approach significantly reduces the memory requirement in fully three-dimensional geometries, and makes the computation more cost effective. The formulation can be easily adapted to an existing flow solver based on a two-dimensional generalized coordinate system coupled with a Cartesian third direction, with only a small increase in computational cost. The feasibility and efficiency of the present method have been assessed in a simulation of flow over a tapered cylinder.


1998 ◽  
Vol 371 ◽  
pp. 207-232 ◽  
Author(s):  
G. VITTORI ◽  
R. VERZICCO

Numerical simulations of Navier–Stokes equations are performed to study the flow originated by an oscillating pressure gradient close to a wall characterized by small imperfections. The scenario of transition from the laminar to the turbulent regime is investigated and the results are interpreted in the light of existing analytical theories. The ‘disturbed-laminar’ and the ‘intermittently turbulent’ regimes detected experimentally are reproduced by the present simulations. Moreover it is found that imperfections of the wall are of fundamental importance in causing the growth of two-dimensional disturbances which in turn trigger turbulence in the Stokes boundary layer. Finally, in the intermittently turbulent regime, a description is given of the temporal development of turbulence characteristics.


1989 ◽  
Vol 111 (4) ◽  
pp. 414-419 ◽  
Author(s):  
T. Solberg ◽  
K. J. Eidsvik

A model for two-dimensional flows over a cylinder at a plane boundary is developed. The model, based upon a (k-ε) turbulence closure, is formulated in a curvilinear coordinate system based upon frictionless flow. A length scale modification in areas of adverse pressure gradient and recirculating flow appears to be more realistic than the standard (k-ε) model. The main features of the predicted flow do not depend critically upon the details of the grid or model, which means that a well defined solution is obtained. The solution appears to be reasonable and validated to the extent that the data permits.


2016 ◽  
pp. 90-92
Author(s):  
A. G. Obukhov ◽  
R. E. Volkov

It is proved that complex flows of the viscous compressible heat-conducting gas, arising during heating the vertical field, have a pronounced axial symmetry. Therefore, for the numerical solution of the full Navier-Stokes equations for description of such gas flows it are advisable to use a cylindrical coordinate system. This paper describes the transformation of the first projection of the equation of motion of the full Navier-Stokes equations system. The result of the transformation is a record of the first projection of the equation of a continuous medium motion in the cylindrical coordinate system.


2003 ◽  
Vol 125 (2) ◽  
pp. 382-385 ◽  
Author(s):  
S. Tsangaris ◽  
N. W. Vlachakis

The Navier-Stokes equations have been solved in order to obtain an analytical solution of the fully developed laminar flow in a duct having a rectangular cross section with two opposite equally porous walls. We obtained solutions both for the case of steady flow as well as for the case of oscillating pressure gradient flow. The pulsating flow is obtained by the superposition of the steady and oscillating pressure gradient solutions. The solution has applications for blood flow in fiber membranes used for the artificial kidney.


Sign in / Sign up

Export Citation Format

Share Document