Size-segregated fine particle measurements by chemical species and their impact on visibility impairment in Denver

1991 ◽  
Vol 25 (5-6) ◽  
pp. 1013-1024 ◽  
Author(s):  
Christine S. Sloane ◽  
John Watson ◽  
Judith Chow ◽  
Lyle Pritchett ◽  
L. Willard Richards
2001 ◽  
Vol 32 ◽  
pp. 31-32
Author(s):  
J. HOKKINEN ◽  
J. LYYRÄNEN ◽  
U. BACKMAN ◽  
J. JOKINIEMI

2014 ◽  
Vol 14 (6) ◽  
pp. 7517-7556 ◽  
Author(s):  
K. Huang ◽  
G. Zhuang ◽  
Q. Wang ◽  
J. S. Fu ◽  
Y. Lin ◽  
...  

Abstract. Severe haze hovered over large areas of China in January 2013 right after the public release of PM2.5 data of major cities in China at the very first time. This historical severe haze emerged over the northern China with monthly average concentrations of PM2.5, SO2, and NO2 exceeding 225, 200, and 80 μg m−3, respectively. Surface aerosol mean concentration of Beijing in January 2013 reached record high (only slightly lower than 2006) compared to historical data from 2003–2012, but with the largest daily fluctuation. Anomalous meteorological conditions in 2013 compared to the mean climatology from 2007–2012 were especially favorable for the formation of haze, such as higher humidity, lower temperature, lower PBL height, lower wind speed, and the high frequency of fog occurrences. The field campaign in Beijing showed an extremely high PM2.5 average concentration of 299.2 ± 79.1μg m−3 with extremely low visibility of 0.92 ± 0.82 km during an episode of high relative humidity with fog events. High AOD (Aerosol Optical Depth) was observed during fog days but with relatively low Angstrom exponent (< 1.0), suggesting the modification of fog processing on the particle size. Major aerosol chemical species, such as SO42−, NO3−, NH4+, Cl−, K+, and C2O42− presented an explicit exponential growth relationship with relative humidity, suggesting the significant impact of aerosol hygroscopicity on the visibility impairment. SO42− increased ∼5 folds while NO3−, NH4+, and C2O42− increased ∼3 folds in the fog days compared to the non-fog days. Aerosol in fog days was much more acidic than that in non-fog days. The in situ aerosol pH ranged from −0.78 to 0.14 in fog days based on the E-AIM model simulation. Bisulfate (HSO42−) accounted for 52% of the total sulfate and free hydrogen ion (H+Aq) accounted for 27% of the total acids in average. Enhanced coal combustion during the winter heating season along with traffic and industrial emissions were recognized to be the major causes for this severe haze. Fog processing was found to be the major pathway of producing extremely high yields of secondary inorganic aerosol and impacting the neutralization process (i.e. aerosol acidity) in this study.


2006 ◽  
Vol 15 (3) ◽  
pp. 394-405 ◽  
Author(s):  
M.C. Visser ◽  
B. Fairchild ◽  
M. Czarick ◽  
M. Lacy ◽  
J. Worley ◽  
...  

2001 ◽  
Vol 35 (4) ◽  
pp. 635-643 ◽  
Author(s):  
Jong Hoon Lee ◽  
Yong Pyo Kim ◽  
Kil-Choo Moon ◽  
Hui-Kang Kim ◽  
Chong Bum Lee

2019 ◽  
Vol 53 (9) ◽  
pp. 1067-1078 ◽  
Author(s):  
Ellen Gute ◽  
Larissa Lacher ◽  
Zamin A. Kanji ◽  
Rebecca Kohl ◽  
Joachim Curtius ◽  
...  

1999 ◽  
Vol 30 ◽  
pp. S153-S154 ◽  
Author(s):  
M. Hermann ◽  
F. Stratmann ◽  
A. Wiedensohler

2004 ◽  
Vol 1 (11) ◽  
pp. 707-715 ◽  
Author(s):  
Jee Young Kim ◽  
Shannon R. Magari ◽  
Robert F. Herrick ◽  
Thomas J. Smith ◽  
David C. Christiani ◽  
...  

Author(s):  
R. H. Duff

A material irradiated with electrons emits x-rays having energies characteristic of the elements present. Chemical combination between elements results in a small shift of the peak energies of these characteristic x-rays because chemical bonds between different elements have different energies. The energy differences of the characteristic x-rays resulting from valence electron transitions can be used to identify the chemical species present and to obtain information about the chemical bond itself. Although these peak-energy shifts have been well known for a number of years, their use for chemical-species identification in small volumes of material was not realized until the development of the electron microprobe.


Author(s):  
J. Barbillat ◽  
M. Delhaye ◽  
P. Dhamelincourt

Raman mapping, with a spatial resolution close to the diffraction limit, can help to reveal the distribution of chemical species at the surface of an heterogeneous sample.As early as 1975,three methods of sample laser illumination and detector configuration have been proposed to perform Raman mapping at the microscopic level (Fig. 1),:- Point illumination:The basic design of the instrument is a classical Raman microprobe equipped with a PM tube or either a linear photodiode array or a two-dimensional CCD detector. A laser beam is focused on a very small area ,close to the diffraction limit.In order to explore the whole surface of the sample,the specimen is moved sequentially beneath the microscope by means of a motorized XY stage. For each point analyzed, a complete spectrum is obtained from which spectral information of interest is extracted for Raman image reconstruction.- Line illuminationA narrow laser line is focused onto the sample either by a cylindrical lens or by a scanning device and is optically conjugated with the entrance slit of the stigmatic spectrograph.


Sign in / Sign up

Export Citation Format

Share Document