Combination of Strobilurin and Triazole Chemicals for the Management of Blast Disease in Mushk Budji -Aromatic Rice

Rice blast is considered one of the most important fungal diseases of rice. Although diseases can be managed by using resistant cultivars, the blast pathogen has successfully overcome the single gene resistance in a short period and rendered several varieties susceptible to blast which were otherwise intended to be resistant. As such, chemical control is still the most efficient method of disease control for reducing the losses caused due to diseases. Field experiments were conducted over two successive years, 2018 and 2019, in temperate rice growing areas in northern India. All the fungicides effectively reduced leaf blast incidence and intensity, and neck blast incidence under field conditions. Tricyclazole proved most effective against rice blast and recorded a leaf blast incidence of only 8.41%. Among the combinations of fungicides, azoxystrobin + difenoconazole and azoxystrobin + tebuconazole were highly effective, recording a leaf blast incidence of 9.19 and 10.40%, respectively. The chemical combination mancozeb + carbendazim proved less effective in controlling the blast and it recorded a disease incidence of 27.61%. A similar trend was followed in neck blast incidence with tricyclazole, azoxystrobin + difenoconazole, and azoxystrobin + tebuconazole showing the highest levels of blast reductions. It is evident from the current study that the tested fungicide combinations can be used as alternatives to tricyclazole which is facing the challenges of fungicide resistance development and other environmental concerns and has been banned from use in India and other countries. The manuscript may provide a guideline of fungicide application to farmers cultivating susceptible varieties of rice.

Chemical composition of essential oil by SPME and evaulation antimicrobial, antioxidant activities of medicinal plant of Quercus infectoria galls

Quercus infectoria galls have been utilized to cure widespread illnesses. In line with it, this paper aims to investigate the chemical combination of the volatile oils obtained from galls of Q. infectoria and evaluate their antioxidant and antimicrobial features. The volatiles of Q. infectoria has been isolated by solid-phase microextraction (SPME). The compositions of the volatiles were revealed via gas chromatography coupled with mass spectrometry (GC-MS). Twenty-nine substances have been characterized in the volatile essential oil of Q. infectoria. The major components of the volatile oil were (Z)-Anethol 28.55%, pentadecanolide (26.44%), diethyl phthalate (6.46%), and acetoin (5.66%). Q. infectoria showed good-moderate antimicrobial (Staphylococcus aureus, Streptomyces griseolus, Pseudomonas citronellosis) and antifungal (Candida glabrata, Candida krusei) activities against to test microorganisms with MIC value 250 µg/mL and 125 µg/mL, respectively. Also, total flavonoid and total polyphenol amounts were found for Q. infectoria, and our total polyphenol result (342.87 mg GAE/g) was found higher than the studies in the literature. At the same time Q. infectoria has been observed to have high antioxidant activity according to DPPH, FRAP, and CUPRAC assays. Especially it exhibited excellent DPPH activity for the IC50 rate of 0.002 μg/mL which is higher than the standard Trolox (IC50 = 0.008 μg/mL). This study is important because it is the first one, which reports the determination of essential oil, total polyphenol, flavonoid contents, antioxidant, and antimicrobial activities all together for Q. infectoria.

Effect of montmorillonite on the oxidative stability of polyphenylene sulfide fibers prepared by melt spinning

Masterbatches of polyphenylene sulfide (PPS)/organic montmorillonite (MMT) composites were produced via melt blending. A self-made spinning equipment was then used to produce the PPS/organic MMT composite fibers by melt spinning directly from the masterbatches. X-ray diffractometer and transmission electron microscope were used to examine the dispersibility of organic MMT. The morphology, tensile property, crystallization behavior, and oxidative stability of PPS fibers were investigated. The results indicated that organic MMT could be uniformly distributed in the PPS matrix to form a mixed dispersion of intercalated and exfoliated structure and influence the longitudinal surface morphology of fibers to become rough. The roughness of composite fibers surface was proportional to the content of organic MMT. The organic MMT nanolayers could act as the heterogeneous nucleating agents to improve the crystallization, and the crystallity of composite fibers increased with the increase of organic MMT content. The breaking strength of composite fibers first increased and then decreased by increasing the amount of organic MMT. After the oxidation treatment, the breaking strength of neat PPS fibers and composite fibers declined, but the degree of breaking strength loss for composite fibers is lower than that of neat PPS fibers. The dynamic oxidation induction temperature of composite fibers also showed a significant increase by adding organic MMT. Moreover, the addition of organic MMT could limit the chemical combination of element sulfur and oxygen, retard the generation of sulfoxide groups, and induce the conversion of sulfur atoms from C-S bond to sulfone for improving oxidative stability.

The Antimicrobial Efficacy of four different Intracanal Medication to Microorganisms existing in the Failure of Endodontic Therapy: An in vitro study

Aim.This study aims to identify the efficacy of different intracanal medication formulations existing in end of endodontic therapy’s failure, and related to strains of Enterococcus faecalis, Pseudomonas aeruginosa, and Staphylococcus aureus in Petri plates. Materials and methods. It was used diffusion test in agar where each Petri plate with the inoculated bacteria. Perforations of approximately 4 mm deep by 5 mm in diameter were made to prepare where the intracanal drug (25 µl) to be tested. The diameters of the bacterial inhibition zones were measured and registered to each tested medication at the period of 24 hours, 48 hours, 7 and 14 days respectively. Results. All the medications promoted inhibition halos. The inhibition halos were represented in mm. A higher elimination of micro-organisms can be significantly achieved through the association of different substances in the formulation of an intra canal medication, with emphasis to Ca (OH)2 combined with nitrofurazone and magnesium oxide respectively. Conclusion. Cleaning and shaping of the root canal system associated with the chemical combination of Ca (OH) 2 with antiseptic pastes or solutions considerably reduce the bacterial load.

The Antimicrobial Efficacy of four different Intracanal Medication to Microorganisms existing in the Failure of Endodontic Therapy: An in vitro study

Aim.This study aims to identify the efficacy of different intracanal medication formulations existing in end of endodontic therapy’s failure, and related to strains of Enterococcus faecalis, Pseudomonas aeruginosa, and Staphylococcus aureus in Petri plates. Materials and methods. It was used diffusion test in agar where each Petri plate with the inoculated bacteria. Perforations of approximately 4 mm deep by 5 mm in diameter were made to prepare where the intracanal drug (25 µl) to be tested. The diameters of the bacterial inhibition zones were measured and registered to each tested medication at the period of 24 hours, 48 hours, 7 and 14 days respectively. Results. All the medications promoted inhibition halos. The inhibition halos were represented in mm. A higher elimination of micro-organisms can be significantly achieved through the association of different substances in the formulation of an intra canal medication, with emphasis to Ca (OH)2 combined with nitrofurazone and magnesium oxide respectively. Conclusion. Cleaning and shaping of the root canal system associated with the chemical combination of Ca (OH) 2 with antiseptic pastes or solutions considerably reduce the bacterial load.

The Antimicrobial Efficacy of four different Intracanal Medication to Microorganisms existing in the Failure of Endodontic Therapy: An in vitro study

Aim.This study aims to identify the efficacy of different intracanal medication formulations existing in end of endodontic therapy’s failure, and related to strains of Enterococcus faecalis, Pseudomonas aeruginosa, and Staphylococcus aureus in Petri plates. Materials and methods. It was used diffusion test in agar where each Petri plate with the inoculated bacteria. Perforations of approximately 4 mm deep by 5 mm in diameter were made to prepare where the intracanal drug (25 µl) to be tested. The diameters of the bacterial inhibition zones were measured and registered to each tested medication at the period of 24 hours, 48 hours, 7 and 14 days respectively. Results. All the medications promoted inhibition halos. The inhibition halos were represented in mm. A higher elimination of micro-organisms can be significantly achieved through the association of different substances in the formulation of an intra canal medication, with emphasis to Ca (OH)2 combined with nitrofurazone and magnesium oxide respectively. Conclusion. Cleaning and shaping of the root canal system associated with the chemical combination of Ca (OH) 2 with antiseptic pastes or solutions considerably reduce the bacterial load.

Study on Nanoparticle Stabilized Emulsions for Chemical Flooding Enhanced Oil Recovery

Chemical flooding is one of enhanced oil recovery (EOR) methods. The primary mechanism of EOR of chemical flooding is interfacial tension reduction, mobility ratio improvement and wettability changes. Recent studies showed that enhancing emulsification performance was beneficial to improve oil displacement efficiency. The formation of Pickering emulsion by nanoparticles could greatly improve the emulsifying performance. Using nanoparticles stabilized emulsions for chemical EOR application is a novel method. In this study, six different types of nanoparticles were selected, including hydrophilic nano silica, modified nano silica, carbon nanotubes and bentonite, etc. The nanoparticle combine with petroleum sulfonate could form a stable emulsion. Particle wettability were measured by using contact angle measurement (OCA20). Emulsifying intensity index was measured for different nanoparticle-stabilized emulsions. The mechanisms of nanoparticle-stabilized emulsions and relationship between emulsion stability have been investigated. The influence of dispersant on nanoparticle-stabilized emulsions also has been investigated. Nanoparticles mainly play a role in improving the stability of emulsions while surfactant play a major role in enhancing the emulsifying dispersion. The wettability of solid particles was one of the most important factors that affects the stability of emulsions. Partial hydrophobic nanoparticles were much easier to form stable emulsions than hydrophilic nanoparticles. Nanoparticles could form a three-dimensional network structure, thereby the stability of the emulsion was improved. Use of surfactant to disperse nanoparticles could further improve the emulsion stability. Finally, three nanoparticles stabilized emulsion formulations were developed for chemical flooding EOR. Nanoparticle-stabilized emulsions could improve oil displacement efficiency in chemical combination flooding. This research was used to optimize chemical combination flooding formulation and has a guidance function for application of nanoparticles in chemical flooding EOR.

Silanized Silica-Encapsulated Calcium Carbonate@Natural Rubber Composites Prepared by One-Pot Reaction

This article demonstrates the one-pot reaction, an efficient and environmentally friendly organic synthesis method, utilized to prepare the silanized silica-encapsulated calcium carbonate@natural rubber composites (SSC@NR), following first mixing the calcium carbonate (CaCO3) solution, silica (SiO2) sol solution and a small amount of Si-69 solution, to modify the surface of CaCO3 particles, and then wet mixing with natural rubber latex. The obtained silanized silica-encapsulated calcium carbonate (SSC) particles were tested by TGA, FTIR and XRD, to substantiate the effect of surface modification. Moreover, the effects of the amount of SSC on the Mooney viscosity, curing characteristics, physical and mechanical properties and dynamic mechanical properties of the SSC@NR were investigated. The results show that the surface of modified CaCO3 is effectively coated with SiO2 particles by means of physical and chemical combination, to achieve the effect of surface coating. When the optimum amount of SSC filler is 40 phr, the SSC can form better physical adsorption and chemical combination with the NR molecular chains and can be evenly dispersed in the rubber matrix, resulting in the conspicuous improvement of physical and mechanical properties, such as the tensile strength, tear strength, elongation at break and abrasion resistance. Meanwhile, the compound with SSC has preferable processability and dynamic mechanical properties.

A novel chemical-combination screen in zebrafish identifies epigenetic small molecule candidates for the treatment of Duchenne muscular dystrophy

Background Duchenne muscular dystrophy (DMD) is a severe neuromuscular disorder and is one of the most common muscular dystrophies. There are currently few effective therapies to treat the disease, although many small-molecule approaches are being pursued. Certain histone deacetylase inhibitors (HDACi) have been shown to ameliorate DMD phenotypes in mouse and zebrafish animal models. The HDACi givinostat has shown promise for DMD in clinical trials. However, beyond a small group of HDACi, other classes of epigenetic small molecules have not been broadly and systematically studied for their benefits for DMD. Methods We used an established animal model for DMD, the zebrafish dmd mutant strain sapje. A commercially available library of epigenetic small molecules was used to treat embryonic-larval stages of dmd mutant zebrafish. We used a quantitative muscle birefringence assay in order to assess and compare the effects of small-molecule treatments on dmd mutant zebrafish skeletal muscle structure. Results We performed a novel chemical-combination screen of a library of epigenetic compounds using the zebrafish dmd model. We identified candidate pools of epigenetic compounds that improve skeletal muscle structure in dmd mutant zebrafish. We then identified a specific combination of two HDACi compounds, oxamflatin and salermide, that ameliorated dmd mutant zebrafish skeletal muscle degeneration. We validated the effects of oxamflatin and salermide on dmd mutant zebrafish in an independent laboratory. Furthermore, we showed that the combination of oxamflatin and salermide caused increased levels of histone H4 acetylation in zebrafish larvae. Conclusions Our results provide novel, effective methods for performing a combination of small-molecule screen in zebrafish. Our results also add to the growing evidence that epigenetic small molecules may be promising candidates for treating DMD.