MARKETS FOR INDUSTRIAL HEAT RECOVERY HEAT PUMPS IN THE UK: MYTHS AND REALITIES

1984 ◽  
pp. 331-336
Author(s):  
S.D. Fawkes ◽  
J.K. Jacques
Keyword(s):  
Heat Recovery ◽  
Heat Pumps ◽  
The Uk

350 Euston Road: Improving building performances and carbon footprint with innovative heating, ventilation and air conditioning solutions – A case study

2017 ◽  
Vol 38 (6) ◽  
pp. 650-662
Author(s):  
Phil Draper
Keyword(s):  
Carbon Footprint ◽  
Heat Recovery ◽  
Electric Energy ◽  
Integrated Approach ◽  
Energy Performance ◽  
Heat Pumps ◽  
Low Carbon ◽  
Heating And Cooling ◽  
The Uk

This case study paper describes the advantages of how heat pumps with heat recovery worked to contribute to improving energy performance and reducing the carbon footprint of buildings, with a short payback, thus showing it is a viable technology for energy cost reduction and for improving the environmental impact of buildings within the UK. All actions were taken based on performance for both the current and the future expected needs of the building and are measured against a baseline. The research and results confirm that heat pumps with heat recovery are a viable solution for London office buildings offering an integrated approach to building heating and cooling. The project resulted in a final reduction of 62% on the base building controlled utilities (total building less occupier power). The added benefits will be around the carbon benefits that the resultant 86% reduction in gas will bring due to the gradual de-carbonisation of the electric energy production in the UK. Practical application: This paper illustrates how to utilise an existing building’s energy use data to determine how relatively simple technology can optimise the provision of simultaneous heating and cooling for comfort. It also details how modelled data can be used to allow the correct sizing of equipment to deliver both good internal comfort and low carbon emissions.

Saving Primary Energy Consumption Through Exergy Analysis of Combine Distillation and Power Plant

2012 ◽  
Vol 9 (2) ◽  
pp. 65
Author(s):  
Alhassan Salami Tijani ◽  
Nazri Mohammed ◽  
Werner Witt
Keyword(s):  
Energy Consumption ◽  
Power Plant ◽  
Heat Pump ◽  
Heat Recovery ◽  
Energy Savings ◽  
Primary Energy ◽  
Heat Pumps ◽  
Saturated Steam ◽  
Distillation Unit ◽  
Primary Energy Consumption

Industrial heat pumps are heat-recovery systems that allow the temperature ofwaste-heat stream to be increased to a higher, more efficient temperature. Consequently, heat pumps can improve energy efficiency in industrial processes as well as energy savings when conventional passive-heat recovery is not possible. In this paper, possible ways of saving energy in the chemical industry are considered, the objective is to reduce the primary energy (such as coal) consumption of power plant. Particularly the thermodynamic analyses ofintegrating backpressure turbine ofa power plant with distillation units have been considered. Some practical examples such as conventional distillation unit and heat pump are used as a means of reducing primary energy consumption with tangible indications of energy savings. The heat pump distillation is operated via electrical power from the power plant. The exergy efficiency ofthe primary fuel is calculated for different operating range ofthe heat pump distillation. This is then compared with a conventional distillation unit that depends on saturated steam from a power plant as the source of energy. The results obtained show that heat pump distillation is an economic way to save energy if the temperaturedifference between the overhead and the bottom is small. Based on the result, the energy saved by the application of a heat pump distillation is improved compared to conventional distillation unit.

scholarly journals Heat Pump Bridge Analysis Using the Modified Energy Transfer Diagram

Energies ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 137
Author(s):  
Florian Schlosser ◽  
Heinrich Wiebe ◽  
Timothy G. Walmsley ◽  
Martin J. Atkins ◽  
Michael R. W. Walmsley ◽  
...  
Keyword(s):  
Energy Transfer ◽  
Heat Pump ◽  
Heat Recovery ◽  
Heat Pumps ◽  
Coefficient Of Performance ◽  
Combined Application ◽  
Recovery Potential ◽  
Composite Curve ◽  
And Performance ◽  
The Individual

Heat pumps are the key technology to decarbonise thermal processes by upgrading industrial surplus heat using renewable electricity. Existing insight-based integration methods refer to the idealised Grand Composite Curve requiring the full exploitation of heat recovery potential but leave the question of how to deal with technical or economic limitations unanswered. In this work, a novel Heat Pump Bridge Analysis (HPBA) is introduced for practically targeting technical and economic heat pump potential by applying Coefficient of Performance curves into the Modified Energy Transfer Diagram (METD). Removing cross-Pinch violations and operating heat exchangers at minimum approach temperatures by combined application of Bridge Analysis increases the heat recovery rate and reduce the temperature lift to be pumped at the same time. The insight-based METD allows the individual matching of heat surpluses and deficits of individual streams with the capabilities and performance of different market-available heat pump concepts. For an illustrative example, the presented modifications based on HPBA increase the economically viable share of the technical heat pump potential from 61% to 79%.

scholarly journals Study of Methods and Development of Technological Scheme for Heat Removal from Rock Waste Dump

2017 ◽  
Vol 25 ◽  
pp. 128-135 ◽  
Author(s):  
Pavlo Saik
Keyword(s):  
Heat Recovery ◽  
Coal Gasification ◽  
Waste Heat ◽  
Renewable Energy Sources ◽  
Heat Removal ◽  
Heat Pumps ◽  
Technological Scheme ◽  
Underground Coal Gasification ◽  
Waste Dump ◽  
Waste Dumps

The aim of this paper is to study the methods and develop technological scheme for thermal energy removal from coal mine rock waste dumps. The prospects of renewable energy sources development in Ukraine are analyzed. A number of available ways for using the sources of waste heat of mining enterprises, namely: outlet ventilation flow, mine water and other rock waste dumps, are investigated. The technological scheme of heat recovery from rock waste dump using heat pumps, which are component segments of the heat pump geosystem on the basis of borehole underground coal gasification, is developed.

scholarly journals Improved measurements for better decision on heat recovery solutions with heat pumps

2012 ◽  
Vol 35 (6) ◽  
pp. 1558-1569 ◽  
Author(s):  
Natasa Djuric ◽  
Vojislav Novakovic ◽  
Frode Frydenlund
Keyword(s):  
Heat Recovery ◽  
Heat Pumps

scholarly journals Opportunities to decarbonize heat in the UK using Urban Wastewater Heat Recovery

2021 ◽  
pp. 014362442110347
Author(s):  
Shazia Farman Ali ◽  
Aaron Gillich
Keyword(s):  
Heat Recovery ◽  
Treatment Plant ◽  
Evidence Base ◽  
Economic Feasibility ◽  
Policy Implications ◽  
Treated Wastewater ◽  
Low Carbon ◽  
Net Zero ◽  
Heat Potential ◽  
The Uk

By 2050, the UK government plans to create ‘Net zero society’. 1 To meet this ambitious target, the deployment of low carbon technologies is an urgent priority. The low carbon heat recovery technologies such as heat recovery from sewage via heat pump can play an important role. It is based on recovering heat from the sewage that is added by the consumer, used and flushed in the sewer. This technology is currently successfully operating in many cities around the world. In the UK, there is also a rising interest to explore this technology after successful sewage heat recovery demonstration project at Borders College, Galashiels, Scotland. 2 However, further experimental research is needed to build the evidence base, replicate, and de-risk the concept elsewhere in the UK. The Home Energy 4 Tomorrow (HE4T) project at London South Bank University was created to address this evidence gap. This is the fourth article in the series of outputs on sewage heat recovery and presents some results using sewage data from the UK’s capital London. These data are scarce and provide useful information on the variation of flows and temperatures encountered in the sewers of the UK’s capital. Lastly, we discuss the recoverable heat potential along with policy implications for the UK heat strategy. Practical application This work focuses and accentuate that in order to meet climate change targets, substantial improvements can come by heat recovery from the raw (influent) and treated wastewater (effluent from wastewater treatment plant) that is still unexploited in the UK. The estimation presented indicates that there is much theoretical potential in the UK with significant opportunity for future energy and revenue retrieval along with GHGs emission reduction in the longer term to fulfil the ‘net zero’ objective. This work aims to raise awareness and seek support to promote pilot scale studies to help demonstrate technical and economic feasibility in the building industry.

Sign in / Sign up

Export Citation Format

Share Document