METHOD OF SUCCESSIVE APPROXIMATIONS

1971 ◽  
pp. 26-40
Author(s):  
RAM P. KANWAL
Keyword(s):  
Successive Approximations ◽  
Method Of Successive Approximations

Numerical Methods for Solving Physically Nonlinear Problems for Inhomogeneous Thick-Walled Shells

2017 ◽  
Vol 865 ◽  
pp. 325-330 ◽  
Author(s):  
Vladimir I. Andreev ◽  
Lyudmila S. Polyakova
Keyword(s):  
Numerical Method ◽  
Nonlinear Problems ◽  
Successive Approximations ◽  
Method Of Successive Approximations ◽  
Deformation Diagram ◽  
Method Of Solution ◽  
Properties Of Materials ◽  
Physical Fields ◽  
Cylinders And Spheres ◽  
Numerical Method Of Solution

The paper proposes the numerical method of solution the problems of calculation the stress state in thick-walled cylinders and spheres from physically nonlinear inhomogeneous material. The urgency of solved problem due to the change of mechanical properties of materials under the influence of different physical fields (temperature, humidity, radiation, etc.). The deformation diagram describes the three-parameter formula. The numerical method used the method of successive approximations. The results of numerical calculation are compared with the test analytical solutions obtaining the authors with some restrictions on diagram parameters. The obtained results can be considered quite satisfactory.

On a sphere performing linear and torsional oscillations in a viscous fluid

1988 ◽  
Vol 66 (7) ◽  
pp. 576-579
Author(s):  
G. T. Karahalios ◽  
C. Sfetsos
Keyword(s):  
Boundary Layer ◽  
Viscous Fluid ◽  
Secondary Flow ◽  
Small Amplitude ◽  
Equations Of Motion ◽  
Successive Approximations ◽  
Method Of Successive Approximations ◽  
Time Varying ◽  
Torsional Oscillations

A sphere executes small-amplitude linear and torsional oscillations in a fluid at rest. The equations of motion of the fluid are solved by the method of successive approximations. Outside the boundary layer, a steady secondary flow is induced in addition to the time-varying motion.

scholarly journals Green’s Function In Free Axisymmetric Vibration Analysis Of Annular Thin Plates With Different Boundary Conditions

2015 ◽  
Vol 20 (4) ◽  
pp. 939-951
Author(s):  
K.K. Żur
Keyword(s):  
Power Series ◽  
Vibration Analysis ◽  
Free Vibration Analysis ◽  
Thin Plates ◽  
Successive Approximations ◽  
Method Of Successive Approximations ◽  
Axisymmetric Vibration ◽  
Annular Plates ◽  
The Core ◽  
Analytical Frequency

Abstract Free vibration analysis of homogeneous and isotropic annular thin plates by using Green’s functions is considered. The formula of the influence function for uniform thin circular and annular plates is presented in closed-form. The limited independent solutions of differential Euler equation were expanded in the Neumann power series based on properties of integral equations. The analytical frequency equations as power series were obtained using the method of successive approximations. The natural axisymmetric frequencies for singularities when the core radius approaches zero are calculated. The results are compared with selected results presented in the literature.

scholarly journals A new method of successive approximations when calculating elements of electromechanical machines

2020 ◽  
Vol 5 (2) ◽  
pp. 168-172
Author(s):  
K. Ismayilov ◽  
◽  
S.T. Suleymanov ◽  
S.T. Ruziev ◽  
M.B. Aripjanova ◽  
...  
Keyword(s):  
New Method ◽  
Successive Approximations ◽  
Method Of Successive Approximations

scholarly journals Fuzzy Volterra integral equations with in-finite delay

2009 ◽  
Vol 40 (1) ◽  
pp. 19-29 ◽  
Author(s):  
P. Prakash ◽  
V. Kalaiselvi
Keyword(s):  
Integral Equations ◽  
Existence And Uniqueness ◽  
Infinite Delay ◽  
Volterra Integral Equations ◽  
Successive Approximations ◽  
Method Of Successive Approximations ◽  
Uniqueness Of Solutions ◽  
Finite Delay

In this paper, we study the existence and uniqueness of solutions for a class of fuzzy Volterra integral equations with infinite delay by using the method of successive approximations.

scholarly journals Calculation of radial inhomogeneity cylindrical shell when exposed to high temperatures by numerical-analytical method and fem

2019 ◽  
Vol 135 ◽  
pp. 01037
Author(s):  
Vladimir Andreev ◽  
Lyudmila Polyakova
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Analytical Method ◽  
Software Package ◽  
Successive Approximations ◽  
Method Of Successive Approximations ◽  
Infinite Cylinder ◽  
The Finite Element Method ◽  
Numerical Analytical Method ◽  
Element Method

The purpose of the work is to compare two calculation methods using the example of solving the axisymmetric thermoelasticity problem. The calculation of a thick-walled cylindrical three-layer shell on the temperature effect was carried out by the numerical-analytical method and the finite element method implemented in the LIRA-CAD software package. In the calculation, a piecewise linear inhomogeneity of the shell due to its three-layer structure and continuous inhomogeneity caused by the influence of a stationary temperature field is taken into account. The numerical-analytical method of calculation involves the derivation of a resolving differential equation, which is solved by the sweep method, it is possible to take into account the nonlinear nature of the deformation of the material using the method of successive approximations. To solve this problem by the finite element method, a similar computational model of the shell was constructed in the LIRA-CAD software package. The solution of the problem of thermoelasticity for an infinite cylinder (under conditions of a plane deformed state) and for a cylinder of finite length with free ends is given. Comparison of the calculation results is carried out according to the obtained values of ring stresses.

Sign in / Sign up

Export Citation Format

Share Document