SELECTION OF LOCAL PEAK PRESSURE COEFFICIENTS FOR WIND TUNNEL STUDIES OF BUILDINGS

1984 ◽  
pp. 477-488
Author(s):  
J.A. PETERKA
Keyword(s):  
Wind Tunnel ◽  
Peak Pressure ◽  
Pressure Coefficients ◽  
Selection Of

Wind tunnel test on mean wind forces and peak pressure acting on ellipsoidal nacelles of wind turbine

2021 ◽  
pp. 0309524X2110445
Author(s):  
Hiroshi Noda ◽  
Takeshi Ishihara
Keyword(s):  
Wind Tunnel ◽  
Wind Turbine ◽  
Peak Pressure ◽  
Wind Tunnel Test ◽  
Load Case ◽  
Wind Force ◽  
Pressure Coefficients ◽  
Force Coefficients ◽  
Design Load ◽  
Mean Pressure

Mean wind forces and peak pressures acting on ellipsoidal nacelles are investigated by wind tunnel tests. The wind force coefficients of the ellipsoidal nacelles for the wind turbine design and the peak pressure coefficients for the nacelle cover design are proposed based on the experimental data. The wind force coefficients are expressed as functions of yaw angles. The proposed formulas are compared with Eurocode, Germanischer Lloyd and ASCE7-16. It is found that the mean wind force coefficients for the wind turbine nacelles are slightly underestimated in Eurocode. The equivalent maximum and minimum mean pressure coefficients are proposed for use in Design Load Case 6.1 and Design Load Case 6.2 of IEC 61400-1. The peak pressure coefficients are derived using a quasi-steady theory. The proposed equivalent maximum and minimum mean pressure coefficients are much larger than those specified in Germanischer Lloyd.

scholarly journals The Problem of Airflow Around Building Clusters in Different Configurations

2017 ◽  
Vol 64 (3) ◽  
pp. 401-418 ◽  
Author(s):  
Mateusz Jędrzejewski ◽  
Marta Poćwierz ◽  
Katarzyna Zielonko-Jung
Keyword(s):  
Numerical Simulation ◽  
Wind Tunnel ◽  
Pressure Measurement ◽  
Turbulence Models ◽  
Reynolds Stress Model ◽  
Complex Model ◽  
Stress Model ◽  
Qualitative Information ◽  
Pressure Coefficients ◽  
Rsm Model

Abstract In the paper, the authors discuss the construction of a model of an exemplary urban layout. Numerical simulation has been performed by means of a commercial software Fluent using two different turbulence models: the popular k-ε realizable one, and the Reynolds Stress Model (RSM), which is still being developed. The former is a 2-equations model, while the latter – is a RSM model – that consists of 7 equations. The studies have shown that, in this specific case, a more complex model of turbulence is not necessary. The results obtained with this model are not more accurate than the ones obtained using the RKE model. The model, scale 1:400, was tested in a wind tunnel. The pressure measurement near buildings, oil visualization and scour technique were undertaken and described accordingly. Measurements gave the quantitative and qualitative information describing the nature of the flow. Finally, the data were compared with the results of the experiments performed. The pressure coefficients resulting from the experiment were compared with the coefficients obtained from the numerical simulation. At the same time velocity maps and streamlines obtained from the calculations were combined with the results of the oil visualisation and scour technique.

scholarly journals Study of Wind Loads and Wind Speed Amplifications on High-Rise Building with Opening by Numerical Simulation and Wind Tunnel Test

2020 ◽  
Vol 2020 ◽  
pp. 1-24
Author(s):  
Fu-Bin Chen ◽  
Xiao-Lu Wang ◽  
Yun Zhao ◽  
Yuan-Bo Li ◽  
Qiu-Sheng Li ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Wind Speed ◽  
Wind Tunnel ◽  
Wind Pressure ◽  
Wind Loads ◽  
Structural Safety ◽  
Pressure Coefficients ◽  
High Rise ◽  
High Rise Building ◽  
The Mean

High-rise buildings are very sensitive to wind excitations, and wind-induced responses have always been the key factors for structural design. Facade openings have often been used as aerodynamic measures for wind-resistant design of high-rise buildings to meet the requirement of structural safety and comfort. Obvious wind speed amplifications can also be observed inside the openings. Therefore, implementing wind turbines in the openings is of great importance for the utilization of abundant wind energy resources in high-rise buildings and the development of green buildings. Based on numerical simulation and wind tunnel testing, the wind loads and wind speed amplifications on high-rise buildings with openings are investigated in detail. The three-dimensional numerical simulation for wind effects on high-rise building with openings was firstly carried out on FLUENT 15.0 platform by SST k − ε model. The mean wind pressure coefficients and the wind flow characteristics were obtained. The wind speed amplifications at the opening were analyzed, and the distribution law of wind speed in the openings is presented. Meanwhile, a series of wind tunnel tests were conducted to assess the mean and fluctuating wind pressure coefficients in high-rise building models with various opening rates. The variation of wind pressure distribution at typical measuring layers with wind direction was analyzed. Finally, the wind speed amplifications in the openings were studied and verified by the numerical simulation results.

WIND PRESSURE DISTRIBUTION ON LOW-RISE BUILDINGS WITH CYLINDRICAL ROOFS

2015 ◽  
Vol 2 (1) ◽  
Author(s):  
Astha Verma ◽  
Ashok Kumar Ahuja
Keyword(s):  
Boundary Layer ◽  
Experimental Study ◽  
Wind Tunnel ◽  
Pressure Distribution ◽  
Open Circuit ◽  
Wind Pressure ◽  
Wind Loads ◽  
Wind Loading ◽  
Pressure Coefficients ◽  
Available Information

Wind is one of the important loads to be considered while designing the roofs of low-rise buildings. The structural designers refer to relevant code of practices of various countries dealing with wind loads while designing building roofs. However, available information regarding wind pressure coefficients on cylindrical roofs is limited to single span only. Information about wind pressure coefficients on multi-span cylindrical roofs is not available in standards on wind loads. Present paper describes the details of the experimental study carried out on the models of low-rise buildings with multi-span cylindrical roofs in an open circuit boundary layer wind tunnel. Wind pressure values are measured at many pressure points made on roof surface of the rigid models under varying wind incidence angles. Two cases namely, single-span and two-span are considered. The experimental results are presented in the form of contours of mean wind pressure coefficients. Results presented in the paper are of great use for the structural designers while designing buildings with cylindrical roofs. These values can also be used by the experts responsible for revising wind loading codes from time to time.

Wind Pressure Coefficients Determination for Pre-Homogenization Storage in Cement Mill

2011 ◽  
Vol 94-96 ◽  
pp. 1026-1030
Author(s):  
Yue Ming Luo ◽  
Yue Yin ◽  
Xi Liang Liu
Keyword(s):  
Wind Tunnel ◽  
Spherical Shell ◽  
Rapid Development ◽  
Wind Tunnel Test ◽  
Wind Pressure ◽  
Wind Engineering ◽  
Pressure Coefficients ◽  
Continuous Innovation ◽  
Structural Style ◽  
Wind Pressures

Due to the increasing of wind disaster, structural wind engineering arouses more and more attention recently, with rapid development on spatial structure and continuous innovation of structural style. The main purpose of structural wind engineering is to calculate the wind pressure coefficients of structure. In this paper, the numerical wind tunnel method (NWTM), based on the Computational Fluid Dynamics (CFD), is applied to study wind load. The wind pressure coefficients of reticulated spherical shell with the 4.6m high wall were first determined, using the NWTM. The results are then compared with the wind tunnel test (WTT) and good agreement is found. The feasibility and reliability of NWTM were then verified. As the second example, NWTM is carried out to predict wind-induced pressure on reticulated spherical shell without wall. Further the distribution behavior of wind pressures on this kind of structures is discussed which could provide professionals the reference for the design of structure.

Sign in / Sign up

Export Citation Format

Share Document