Characteristic block-centered finite difference method for compressible miscible displacement in porous media

2017 ◽  
Vol 314 ◽  
pp. 391-407
Author(s):  
Xiaoli Li ◽  
Hongxing Rui
2020 ◽  
Vol 61 ◽  
pp. C137-C151
Author(s):  
Jyothi Jose ◽  
Graeme Hocking ◽  
Duncan Farrow

We consider axisymmetric flow towards a point sink from a stratified fluid in a vertically confined aquifer. We present two approaches to solve the equations of flow for the linear density gradient case. Firstly, a series method results in an eigenfunction expansion in Whittaker functions. The second method is a simple finite difference method. Comparison of the two methods verifies the finite difference method is accurate, so that more complicated nonlinear, density stratification can be considered. Such nonlinear profiles cannot be considered with the eigenfunction approach. Interesting results for the case where the density stratification changes from linear to almost two-layer are presented, showing that in the nonlinear case there are certain values of flow rate for which a steady solution does not occur. References Abramowitz, M. and Stegun, I. A., Handbook of Mathematical Functions, 9th ed. National Bureau of Standards, Washington, 1972. Bear, J. and Dagan, G. Some exact solutions of interface problems by means of the hodograph method. J. Geophys. Res. 69(8):1563–1572, 1964. doi:10.1029/JZ069i008p01563 Bear, J. Dynamics of fluids in porous media. Elsevier, New York, 1972. https://store.doverpublications.com/0486656756.html COMSOL Multiphysics. COMSOL Multiphysics Programming Reference Manual, version 5.3. https://doc.comsol.com/5.3/doc/com.comsol.help.comsol/COMSOL_ProgrammingReferenceManual.pdf Farrow, D. E. and Hocking, G. C. A numerical model for withdrawal from a two layer fluid. J. Fluid Mech. 549:141–157, 2006. doi:10.1017/S0022112005007561 Henderson, N., Flores, E., Sampaio, M., Freitas, L. and Platt, G. M. Supercritical fluid flow in porous media: modelling and simulation. Chem. Eng. Sci. 60:1797–1808, 2005. doi:10.1016/j.ces.2004.11.012 Lucas, S. K., Blake, J. R. and Kucera, A. A boundary-integral method applied to water coning in oil reservoirs. ANZIAM J. 32(3):261–283, 1991. doi:10.1017/S0334270000006858 Meyer, H. I. and Garder, A. O. Mechanics of two immiscible fluids in porous media. J. Appl. Phys., 25:1400–1406, 1954. doi:10.1063/1.1721576 Muskat, M. and Wycokoff, R. D. An approximate theory of water coning in oil production. Trans. AIME 114:144–163, 1935. doi:10.2118/935144-G GNU Octave. https://www.gnu.org/software/octave/doc/v4.2.1/ Yih, C. S. On steady stratified flows in porous media. Quart. J. Appl. Maths. 40(2):219–230, 1982. doi:10.1090/qam/666676 Yu, D., Jackson, K. and Harmon, T. C. Disperson and diffusion in porous media under supercritical conditions. Chem. Eng. Sci. 54:357–367, 1999. doi:10.1016/S0009-2509(98)00271-1 Zhang, H. and Hocking, G. C. Axisymmetric flow in an oil reservoir of finite depth caused by a point sink above an oil-water interface. J. Eng. Math. 32:365–376, 1997. doi:10.1023/A:1004227232732 Zhang, H., Hocking, G. C. and Seymour, B. Critical and supercritical withdrawal from a two-layer fluid through a line sink in a bounded aquifer. Adv. Water Res. 32:1703–1710, 2009. doi:10.1016/j.advwatres.2009.09.002 Zill, D. G. and Wright, W. S. Differential Equations with Boundary-value problems, 8th Edition. Brooks Cole, Boston USA, 2013.


2017 ◽  
Vol 22 (4) ◽  
pp. 935-964 ◽  
Author(s):  
Hong Zhang ◽  
Paul Andries Zegeling

AbstractAn adaptive moving mesh finite difference method is presented to solve two types of equations with dynamic capillary pressure effect in porous media. One is the non-equilibrium Richards Equation and the other is the modified Buckley-Leverett equation. The governing equations are discretized with an adaptive moving mesh finite difference method in the space direction and an implicit-explicit method in the time direction. In order to obtain high quality meshes, an adaptive monitor function with directional control is applied to redistribute the mesh grid in every time step, then a diffusive mechanism is used to smooth the monitor function. The behaviors of the central difference flux, the standard local Lax-Friedrich flux and the local Lax-Friedrich flux with reconstruction are investigated by solving a 1D modified Buckley-Leverett equation. With the moving mesh technique, good mesh quality and high numerical accuracy are obtained. A collection of one-dimensional and two-dimensional numerical experiments is presented to demonstrate the accuracy and effectiveness of the proposed method.


Geophysics ◽  
1995 ◽  
Vol 60 (2) ◽  
pp. 327-340 ◽  
Author(s):  
N. Dai ◽  
A. Vafidis ◽  
E. R. Kanasewich

A particle velocity‐stress, finite‐difference method is developed for the simulation of wave propagation in 2-D heterogeneous poroelastic media. Instead of the prevailing second‐order differential equations, we consider a first‐order hyperbolic system that is equivalent to Biot’s equations. The vector of unknowns in this system consists of the solid and fluid particle velocity components, the solid stress components, and the fluid pressure. A MacCormack finite‐difference scheme that is fourth‐order accurate in space and second‐order accurate in time forms the basis of the numerical solutions for Biot’s hyperbolic system. An original analytic solution for a P‐wave line source in a uniform poroelastic medium is derived for the purposes of source implementation and algorithm testing. In simulations with a two‐layer model, additional “slow” compressional incident, transmitted, and reflected phases are recorded when the damping coefficient is small. This “slow” compressional wave is highly attenuated in porous media saturated by a viscous fluid. From the simulation we also verified that the attenuation mechanism introduced in Biot’s theory is of secondary importance for “fast” compressional and rotational waves. The existence of seismically observable differences caused by the presence of pores has been examined through synthetic experiments that indicate that amplitude variation with offset may be observed on receivers and could be diagnostic of the matrix and fluid parameters. This method was applied in simulating seismic wave propagation over an expanded steam‐heated zone in Cold Lake, Alberta in an area of enhanced oil recovery (EOR) processing. The results indicate that a seismic surface survey can be used to monitor thermal fronts.


2013 ◽  
Vol 2013 ◽  
pp. 1-8
Author(s):  
Wei Liu

Considering two-dimensional compressible miscible displacement flow in porous media, finite difference schemes on grids with local refinement in time are constructed and studied. The construction utilizes a modified upwind approximation and linear interpolation at the slave nodes. Error analysis is presented in the maximum norm and numerical examples illustrating the theory are given.


Sign in / Sign up

Export Citation Format

Share Document