Effects of Ankle-Foot Orthoses on Ankle and Foot Kinematics in Patients With Subtalar Osteoarthritis

2006 ◽  
Vol 87 (8) ◽  
pp. 1131-1136 ◽  
Author(s):  
Yu-Chi Huang ◽  
Kimberly Harbst ◽  
Brian Kotajarvi ◽  
Diana Hansen ◽  
Matthew F. Koff ◽  
...  
2006 ◽  
Vol 87 (5) ◽  
pp. 710-716 ◽  
Author(s):  
Yu-Chi Huang ◽  
Kimberly Harbst ◽  
Brian Kotajarvi ◽  
Diana Hansen ◽  
Matthew F. Koff ◽  
...  

Author(s):  
Hasan Kemal Surmen ◽  
Nazif Ekin Akalan ◽  
Yunus Ziya Arslan

Ankle-foot-orthoses (AFOs) are externally applied assistive devices that are prescribed to the patients with neuromuscular dysfunctions in order to improve abnormal lower limb motor functions. To improve the effectiveness of the AFOs, novel patient-specific designs have been carried out for recent years. According to the level and type of the dysfunctions, there are a variety of designs available in clinics. Different AFO designs, such as solid, dynamic, and hinged can be prescribed for different abnormalities. New designs lead to development of new manufacturing methods. The most conventional manufacturing technique includes a molding process in which the lower part of the leg is casted by producing a positive cast to represent patients' shank, ankle, and foot. However, different manufacturing methods have been improved due to the different design and material requirements. All these developments affect the selection of the AFO. In this chapter, a substantial survey regarding design, manufacture, and selection of AFOs is provided and future trends about these issues are discussed.


Foot & Ankle ◽  
1985 ◽  
Vol 5 (5) ◽  
pp. 238-244 ◽  
Author(s):  
John D. Hsu ◽  
Richard Jackson

Thirteen nonambulatory patients, aged 7 to 15 years and with neuromuscular disease, had residual foot and ankle deformities secondary to persistent and continued muscular imbalance around the ankle and foot. Surgical procedures were done to correct these fixed contractures so that the ankle was neutral and the foot plantigrade at the conclusion of the procedures. Despite successful attainment of the preoperative objectives, surgery should not be performed unless the following indications are present: (1) severe pain, (2) skin breakdown and/or ulceration, and (3) the inability for the foot and ankle to accept reasonably costing and available shoe wear. Recurrence occurs if AFOs (ankle-foot orthoses) are not used after the surgical releases.


Author(s):  
Niels F. J. Waterval ◽  
Merel-Anne Brehm ◽  
Jaap Harlaar ◽  
Frans Nollet

Abstract Background In people with calf muscle weakness, the stiffness of dorsal leaf spring ankle–foot orthoses (DLS-AFO) needs to be individualized to maximize its effect on walking. Orthotic suppliers may recommend a certain stiffness based on body weight and activity level. However, it is unknown whether these recommendations are sufficient to yield the optimal stiffness for the individual. Therefore, we assessed whether the stiffness following the supplier’s recommendation of the Carbon Ankle7 (CA7) dorsal leaf matched the experimentally optimized AFO stiffness. Methods Thirty-four persons with calf muscle weakness were included and provided a new DLS-AFO of which the stiffness could be varied by changing the CA7® (Ottobock, Duderstadt, Germany) dorsal leaf. For five different stiffness levels, including the supplier recommended stiffness, gait biomechanics, walking energy cost and speed were assessed. Based on these measures, the individual experimentally optimal AFO stiffness was selected. Results In only 8 of 34 (23%) participants, the supplier recommended stiffness matched the experimentally optimized AFO stiffness, the latter being on average 1.2 ± 1.3 Nm/degree more flexible. The DLS-AFO with an experimentally optimized stiffness resulted in a significantly lower walking energy cost (− 0.21 ± 0.26 J/kg/m, p < 0.001) and a higher speed (+ 0.02 m/s, p = 0.003). Additionally, a larger ankle range of motion (+ 1.3 ± 0.3 degrees, p < 0.001) and higher ankle power (+ 0.16 ± 0.04 W/kg, p < 0.001) were found with the experimentally optimized stiffness compared to the supplier recommended stiffness. Conclusions In people with calf muscle weakness, current supplier’s recommendations for the CA7 stiffness level result in the provision of DLS-AFOs that are too stiff and only achieve 80% of the reduction in energy cost achieved with an individual optimized stiffness. It is recommended to experimentally optimize the CA7 stiffness in people with calf muscle weakness in order to maximize treatment outcomes. Trial registration Nederlands Trial Register 5170. Registration date: May 7th 2015. http://www.trialregister.nl/trialreg/admin/rctview.asp?TC=5170.


Sensors ◽  
2021 ◽  
Vol 21 (9) ◽  
pp. 3277
Author(s):  
Juan Luis Florenciano Restoy ◽  
Jordi Solé-Casals ◽  
Xantal Borràs-Boix

The objectives of this study were to determine the amplitude of movement differences and asymmetries between feet during the stance phase and to evaluate the effects of foot orthoses (FOs) on foot kinematics in the stance phase during running. In total, 40 males were recruited (age: 43.0 ± 13.8 years, weight: 72.0 ± 5.5 kg, height: 175.5 ± 7.0 cm). Participants ran on a running treadmill at 2.5 m/s using their own footwear, with and without the FOs. Two inertial sensors fixed on the instep of each of the participant’s footwear were used. Amplitude of movement along each axis, contact time and number of steps were considered in the analysis. The results indicate that the movement in the sagittal plane is symmetric, but that it is not in the frontal and transverse planes. The right foot displayed more degrees of movement amplitude than the left foot although these differences are only significant in the abduction case. When FOs are used, a decrease in amplitude of movement in the three axes is observed, except for the dorsi-plantar flexion in the left foot and both feet combined. The contact time and the total step time show a significant increase when FOs are used, but the number of steps is not altered, suggesting that FOs do not interfere in running technique. The reduction in the amplitude of movement would indicate that FOs could be used as a preventive tool. The FOs do not influence the asymmetry of the amplitude of movement observed between feet, and this risk factor is maintained. IMU devices are useful tools to detect risk factors related to running injuries. With its use, even more personalized FOs could be manufactured.


2015 ◽  
Vol 43 (2) ◽  
pp. 427-441 ◽  
Author(s):  
Feng Tian ◽  
Mohamed Samir Hefzy ◽  
Mohammad Elahinia

2014 ◽  
Vol 34 (1) ◽  
pp. 46-52 ◽  
Author(s):  
Patrik Kutilek ◽  
Vladimir Socha ◽  
Slavka Viteckova ◽  
Zdenek Svoboda

2010 ◽  
Vol 34 (3) ◽  
pp. 254-269 ◽  
Author(s):  
Elaine Owen

This paper reviews and summarizes the evidence for important observations of normal and pathological gait and presents an approach to rehabilitation and orthotic management, which is based on the significance of shank and thigh kinematics for standing and gait. It discusses normal gait biomechanics, challenging some traditional beliefs, the interrelationship between segment kinematics, joint kinematics and kinetics and their relationship to orthotic design, alignment and tuning. It proposes a description of four rather than three rockers in gait; a simple categorization of pathological gait based on shank kinematics abnormality; an algorithm for the designing, aligning and tuning of AFO-Footwear Combinations; and an algorithm for determining the sagittal angle of the ankle in an AFO. It reports the results of research on Shank to Vertical Angle alignment of tuned AFO-Footwear Combinations and on the use of ‘point loading’ rocker soles.


Sign in / Sign up

Export Citation Format

Share Document