Thermodynamic analysis and comparison of downdraft gasifiers integrated with gas turbine, spark and compression ignition engines for distributed power generation

2014 ◽  
Vol 66 (1-2) ◽  
pp. 290-297 ◽  
Author(s):  
Andrés Z. Mendiburu ◽  
Justo J. Roberts ◽  
João A. Carvalho ◽  
José L. Silveira
Author(s):  
Brandon J. Blizman ◽  
Darby B. Makel ◽  
J. Hunter Mack ◽  
Robert W. Dibble

A demonstration system has been developed intending to meet the California Energy Commission’s primary goal of improving California’s electric energy cost/value by providing a low-cost, high-efficiency distributed power generation system that operates on landfill gas as fuel. The project team led by Makel Engineering, Inc. includes UC Berkeley, CSU Chico and the Butte County Public Works Department. The team has developed a reliable, multi-cylinder Homogeneous Charge Compression Ignition (HCCI) engine by converting a Caterpillar 3116, 6.6 liter diesel engine to operate in HCCI mode. This engine utilizes a simple and robust thermal control system. Typically, HCCI engines are based on standard diesel engine designs with reduced complexity and cost based on the well known principles of engine dynamics. Coupled to an induction generator, this HCCI genset allows for simplified power grid connection. Testing with this HCCI genset allowed for the development of a control system to maintain optimal the inlet temperature and equivalence ratio. A brake thermal efficiency of 35.0% was achieved while producing less than 10.0 ppm of NOx and 30 kW of electrical power. Less than 5.0 ppm of NOx was recorded with a slightly lower brake thermal efficiency. Tests were conducted with both natural gas and simulated landfill gas as a fuel source. This demonstration system has shown that landfill gas fueled Homogeneous Charge Compression Ignition engine technology is a viable technology for distributed power generation.


2016 ◽  
Vol 66 (8) ◽  
pp. 795-806 ◽  
Author(s):  
Eduardo P. Olaguer ◽  
Eladio Knipping ◽  
Stephanie Shaw ◽  
Satish Ravindran

Author(s):  
Geetha Kamurthy ◽  
Sreenivasappa Bhupasandra Veeranna

The extensive use of fossil fuel is destroying the balance of nature that could lead to many problems in the forthcoming era. Renewable energy resources are a ray of hope to avoid possible destruction. Smart grid and distributed power generation systems are now mainly built with the help of renewable energy resources. The integration of renewable energy production system with the smart grid and distributed power generation is facing many challenges that include addressing the issue of isolation and power quality. This paper presents a new approach to address the aforementioned issues by proposing a hybrid bypass technique concept to improve the overall performance of the grid-tied inverter in solar power generation. The topology with the proposed technique is presented using traditional H5, oH5 and H6 inverter. Comparison of topologies with literature is carried out to check the feasibility of the method proposed. It is found that the leakage current of all the proposed inverters is 9 mA and total harmonic distortion is almost about 2%. The proposed topology has good efficiency, common mode and differential mode characteristics.


Sign in / Sign up

Export Citation Format

Share Document