scholarly journals A two-parameter strain energy function for brain matter: An extension of the Hencky model to incorporate locking

2021 ◽  
pp. 100036
Author(s):  
Luis Saucedo-Mora ◽  
Olatz García-Bañales ◽  
Francisco Javier Montáns ◽  
José María Benítez
Keyword(s):  
Energy Function ◽  
Strain Energy ◽  
Strain Energy Function ◽  
Two Parameter

Finite Axisymmetric Deformations of Initially Cylindrical Reinforced Membranes

1972 ◽  
Vol 45 (6) ◽  
pp. 1677-1683 ◽  
Author(s):  
A. D. Kydoniefs
Keyword(s):  
Stress Field ◽  
Internal Pressure ◽  
Energy Function ◽  
Strain Energy ◽  
Strain Energy Function ◽  
Incompressible Material ◽  
Parameter System ◽  
Axial Section ◽  
Variable Pitch ◽  
Two Parameter

Abstract We consider the axisymmetrie deformations of an initially cylindrical membrane composed of an elastic, homogeneous, isotropic and incompressible material reinforced with a two-parameter system of perfectly flexible and inextensible helicoidal cords of variable pitch. The undeformed configuration is determined so that the deformed membrane has a given axial section under specified internal pressure. The corresponding stress field and cord tensions are obtained. The solution given is exact and valid for the general form of the strain—energy function.

Mechanical power and hyperelasticity

2017 ◽  
Author(s):  
David J. Steigmann
Keyword(s):  
Energy Function ◽  
Strain Energy ◽  
Strain Energy Function ◽  
Mechanical Power ◽  
Elastic Materials ◽  
Cyclic Motion

This chapter covers the notion of hyperelasticity—the concept that stress is derived from a strain—energy function–by invoking an analogy between elastic materials and springs. Alternatively, it can be derived by invoking a work inequality; the notion that work is required to effect a cyclic motion of the material.

scholarly journals Modelling the Inflation and Elastic Instabilities of Rubber-Like Spherical and Cylindrical Shells Using a New Generalised Neo-Hookean Strain Energy Function

2021 ◽  
Author(s):  
Afshin Anssari-Benam ◽  
Andrea Bucchi ◽  
Giuseppe Saccomandi
Keyword(s):  
Experimental Data ◽  
Energy Function ◽  
Limit Point ◽  
Strain Energy ◽  
Cylindrical Shells ◽  
Strain Energy Function ◽  
Model Parameters ◽  
Wide Range ◽  
Cylindrical Tubes ◽  
Gent Model

AbstractThe application of a newly proposed generalised neo-Hookean strain energy function to the inflation of incompressible rubber-like spherical and cylindrical shells is demonstrated in this paper. The pressure ($P$ P ) – inflation ($\lambda $ λ or $v$ v ) relationships are derived and presented for four shells: thin- and thick-walled spherical balloons, and thin- and thick-walled cylindrical tubes. Characteristics of the inflation curves predicted by the model for the four considered shells are analysed and the critical values of the model parameters for exhibiting the limit-point instability are established. The application of the model to extant experimental datasets procured from studies across 19th to 21st century will be demonstrated, showing favourable agreement between the model and the experimental data. The capability of the model to capture the two characteristic instability phenomena in the inflation of rubber-like materials, namely the limit-point and inflation-jump instabilities, will be made evident from both the theoretical analysis and curve-fitting approaches presented in this study. A comparison with the predictions of the Gent model for the considered data is also demonstrated and is shown that our presented model provides improved fits. Given the simplicity of the model, its ability to fit a wide range of experimental data and capture both limit-point and inflation-jump instabilities, we propose the application of our model to the inflation of rubber-like materials.

Mechanical characterization of a woven multi-layered hyperelastic composite laminate under uniaxial loading

2021 ◽  
pp. 002199832110115
Author(s):  
Shaikbepari Mohmmed Khajamoinuddin ◽  
Aritra Chatterjee ◽  
MR Bhat ◽  
Dineshkumar Harursampath ◽  
Namrata Gundiah
Keyword(s):  
Composite Materials ◽  
Energy Function ◽  
Strain Energy ◽  
Strain Energy Function ◽  
Mechanical Tests ◽  
Stress Strain ◽  
Aerospace Applications ◽  
Envelope Material ◽  
The Individual ◽  
High Dielectric

We characterize the material properties of a woven, multi-layered, hyperelastic composite that is useful as an envelope material for high-altitude stratospheric airships and in the design of other large structures. The composite was fabricated by sandwiching a polyaramid Nomex® core, with good tensile strength, between polyimide Kapton® films with high dielectric constant, and cured with epoxy using a vacuum bagging technique. Uniaxial mechanical tests were used to stretch the individual materials and the composite to failure in the longitudinal and transverse directions respectively. The experimental data for Kapton® were fit to a five-parameter Yeoh form of nonlinear, hyperelastic and isotropic constitutive model. Image analysis of the Nomex® sheets, obtained using scanning electron microscopy, demonstrate two families of symmetrically oriented fibers at 69.3°± 7.4° and 129°± 5.3°. Stress-strain results for Nomex® were fit to a nonlinear and orthotropic Holzapfel-Gasser-Ogden (HGO) hyperelastic model with two fiber families. We used a linear decomposition of the strain energy function for the composite, based on the individual strain energy functions for Kapton® and Nomex®, obtained using experimental results. A rule of mixtures approach, using volume fractions of individual constituents present in the composite during specimen fabrication, was used to formulate the strain energy function for the composite. Model results for the composite were in good agreement with experimental stress-strain data. Constitutive properties for woven composite materials, combining nonlinear elastic properties within a composite materials framework, are required in the design of laminated pretensioned structures for civil engineering and in aerospace applications.

Viscohyperelastic Strain Energy Function

2017 ◽  
pp. 59-78 ◽  
Author(s):  
Arne Vogel ◽  
Lalao Rakotomanana ◽  
Dominique P. Pioletti
Keyword(s):  
Energy Function ◽  
Strain Energy ◽  
Strain Energy Function

scholarly journals Development of Anisotropic Hyper-Elastic Shells Using Polyconvex Strain Energy Function with Application to Clothing Fitness Analysis

2010 ◽  
Vol 76 (763) ◽  
pp. 274-282 ◽  
Author(s):  
Masato TANAKA ◽  
Hirohisa NOGUCHI ◽  
Masaki FUJIKAWA ◽  
Masami SATO ◽  
Shuya OI ◽  
...  
Keyword(s):  
Energy Function ◽  
Strain Energy ◽  
Strain Energy Function ◽  
Elastic Shells ◽  
Hyper Elastic ◽  
Fitness Analysis

A strain-energy function to model low and high strain non-linearities in highly filled elastomers

2019 ◽  
pp. 273-278
Author(s):  
T.W. Hohenberger ◽  
R.J. Windslow ◽  
Nicola Pugno ◽  
J.J.C. Busfield
Keyword(s):  
Energy Function ◽  
Strain Energy ◽  
High Strain ◽  
Strain Energy Function ◽  
Filled Elastomers
Sign in / Sign up

Export Citation Format

Share Document