scholarly journals Mechanical and durability properties of alkali-activated mortar based on sugarcane bagasse ash and blast furnace slag

2015 ◽  
Vol 41 (10) ◽  
pp. 13012-13024 ◽  
Author(s):  
Adriana Pereira ◽  
Jorge L. Akasaki ◽  
José L.P. Melges ◽  
Mauro M. Tashima ◽  
Lourdes Soriano ◽  
...  
2020 ◽  
Vol 309 ◽  
pp. 93-97
Author(s):  
Lukáš Procházka ◽  
Jana Boháčová

The paper deals with the possibility of using fly ash, including fly ash after denitrification by SNCR method, from the Třebovice power plant as an admixture to mixtures based on alkali-activated blast furnace slag in order to improve selected physical, mechanical and durability properties.


2020 ◽  
Vol 26 (4) ◽  
pp. 477-481
Author(s):  
Parthiban KATHIRVEL ◽  
Murali GUNASEKARAN ◽  
Sreenath SREEKUMARAN ◽  
Arathi KRISHNA

The study on the characteristics of geopolymer concrete (GPC) is of ultimate significance to instill assurance in builders and engineers. Abundant available literatures point towards the utilization of fly ash and ground granulated blast furnace slag (GGBFS) as source material in the production of GPC with little on other materials. India produces nearly 350 MMT of sugarcane for the production of sugar, which lies second only to Brazil in the annual production, the disposal of the bagasse creates an environmental issue needs to be effectively utilized. Hence, this work was intended to investigate the effect of utilizing sugarcane bagasse ash (SCBA) as a source material in the production of geopolymer mixes. The fresh (consistency, setting time, soundness and flow), hardened (density, compressive strength, expansion and pH) and microstructural properties (X-ray diffraction) of the tested mixes were asessed. The results infer that 20 % replacement level of GGBFS with SCBA produces superior compressive strength and all other results were within the permissible limits even at 40 % replacement level.


2021 ◽  
Vol 325 ◽  
pp. 131-136
Author(s):  
Iveta Plšková ◽  
Petr Hrubý ◽  
Libor Topolář ◽  
Michal Matysík

The paper summarizes partial results of a study of degradation of materials based on alkali-activated blast-furnace slag (AAS) and comparative on cement CEM III/A 32.5 R after exposure to aggressive environments. It further specifies the possibilities for utilising destructive and non-destructive techniques to determine the progress of degradation and characterizes the degree of their correlation. After 28 days of ageing in a water environment, the produced test specimens (40×40×160 mm beams) were placed in aggressive media (ammonium nitrate solutions; sodium sulfate, rotating water) and after subsequent 28, 56 and 84 days of degradation were subjected to testing. Testing comprised both a destructive form (determination of compressive strength and flexural strength) and a selected non-destructive technique (Impact-echo method). The partial outputs were supplemented by the results acquired from monitoring weight changes. In addition, the development of Ultrasonic Pulse Velocity in relation to the progress of the degradation processes was also monitored. While the exposure of both test specimens to water and sodium sulfate did not result in any significant changes, the exposure to the ammonium nitrate solution exhibited rapid signs of degradation associated with a significant reduction in functional characteristics.


2013 ◽  
Vol 44 ◽  
pp. 607-614 ◽  
Author(s):  
O. Burciaga-Díaz ◽  
M.R. Díaz-Guillén ◽  
A.F. Fuentes ◽  
J.I. Escalante-Garcia

Sign in / Sign up

Export Citation Format

Share Document