Multilayer drainage is one of the important technologies for coalbed methane (CBM) production in China. In this study, a multi-field fully coupled mathematical model for CBM production was established to analyze the multilayer drainage of CBM well group in southern Qinshui basin. Based on the numerical simulation results, the characteristics of CBM well production under different drainage rates and key factors influencing the CBM production were further discussed. The results show that the effect of an increased drainage rate on gas production of CBM wells and CBM recovery of No.3 coal seam is not significant. However, it significantly improved the gas production of CBM wells and CBM recovery of No.15 coal seam. After a long period of production, the CBM content in No.3 coal seam has reduced to a low level and the pressure drop potential of No.3 coal seam is insignificant, which are important reasons for the insignificant increase of CBM production even under a drainage rate of 2 to 7 times. Conversely, No.15 coal seam has larger residual CBM content and increasing the drainage rate can significantly improve the pressure drop and superimposed well interference of No.15 coal seam, which means No.15 coal seam has greater production potential than No.3 coal seam. Therefore, it is recommended to improve the gas production and CBM recovery in No.15 coal seam by increasing the drainage rate, and the average hydraulic pressure drop should be 0.018–0.031 MPa/day. The influence of effective stress is weak in No.3 and No.15 coal seam, and the coal seam permeability is largely influenced by the shrinkage of coal matrix caused by CBM desorption. This indicates the feasibility of increase in gas production from CBM wells by increasing the drainage rate.
Numerical analysis of drainage rate for multilayer drainage coalbed methane well group in Southern Qinshui basin
