scholarly journals Quality assessment of Large-Eddy Simulation of wind flow around a high-rise building: Validation and solution verification

2013 ◽  
Vol 79 ◽  
pp. 120-133 ◽  
Author(s):  
P. Gousseau ◽  
B. Blocken ◽  
G.J.F. van Heijst
Computation ◽  
2020 ◽  
Vol 8 (2) ◽  
pp. 47
Author(s):  
Gokhan Kirkil ◽  
Ching-Long Lin

A high-resolution large eddy simulation (LES) of wind flow over the Oklahoma City downtown area was performed to explain the effect of the building height on wind flow over the city. Wind flow over cities is vital for pedestrian and traffic comfort as well as urban heat effects. The average southerly wind speed of eight meters per second was used in the inflow section. It was found that heights and distribution of the buildings have the greatest impact on the wind flow patterns. The complexity of the flow field mainly depended on the location of buildings relative to each other and their heights. A strong up and downflows in the wake of tall buildings as well as large-scale coherent eddies between the low-rise buildings were observed. It was found out that high-rise buildings had the highest impact on the urban wind patterns. Other characteristics of urban canopy flows, such as wind shadows and channeling effects, are also successfully captured by the LES. The LES solver was shown to be a powerful tool for understanding urban canopy flows; therefore, it can be used in similar studies (e.g., other cities, dispersion studies, etc.) in the future.


2018 ◽  
Vol 22 (4) ◽  
pp. 997-1006 ◽  
Author(s):  
Yin Luo ◽  
Hongjun Liu ◽  
Huili Xue ◽  
Kun Lin

In this study, the multiscale synthetic eddy method, which can establish coherent turbulent structures and satisfy predefined turbulent statistical and spectral properties, is employed to generate the inflow turbulence for large-eddy simulation of a high-rise building. The recycling method of Lund and synthetic eddy method is also applied to assess the suitability of multiscale synthetic eddy method. The wind pressure at each mesh face centre on the surface of the high-rise building model is exported in the simulation to determine the wind-induced aerodynamic loads. Compared with the synthetic eddy method, the multiscale synthetic eddy method result is in higher agreement with that of the recycling method of Lund in terms of the wind pressure distribution, wind load characteristic and external flow field of the high-rise building.


2010 ◽  
Vol 652 ◽  
pp. 5-44 ◽  
Author(s):  
S. DUPONT ◽  
F. GOSSELIN ◽  
C. PY ◽  
E. DE LANGRE ◽  
P. HEMON ◽  
...  

In order to investigate the possibility of modelling plant motion at the landscape scale, an equation for crop plant motion, forced by an instantaneous velocity field, is introduced in a large-eddy simulation (LES) airflow model, previously validated over homogeneous and heterogeneous canopies. The canopy is simply represented as a poroelastic continuous medium, which is similar in its discrete form to an infinite row of identical oscillating stems. Only one linear mode of plant vibration is considered. Two-way coupling between plant motion and the wind flow is insured through the drag force term. The coupled model is validated on the basis of a comparison with measured movements of an alfalfa crop canopy. It is also compared with the outputs of a linear stability analysis. The model is shown to reproduce the well-known phenomenon of ‘honami’ which is typical of wave-like crop motions on windy days. The wavelength of the main coherent waving patches, extracted using a bi-orthogonal decomposition (BOD) of the crop velocity fields, is in agreement with that deduced from video recordings. The main spatial and temporal characteristics of these waving patches exhibit the same variation with mean wind velocity as that observed with the measurements. However they differ from the coherent eddy structures of the wind flow at canopy top, so that coherent waving patches cannot be seen as direct signatures of coherent eddy structures. Finally, it is shown that the impact of crop motion on the wind dynamics is negligible for current wind speed values. No lock-in mechanism of coherent eddy structures on plant motion is observed, in contradiction with the linear stability analysis. This discrepancy may be attributed to the presence of a nonlinear saturation mechanism in LES.


2014 ◽  
Vol 695 ◽  
pp. 562-566
Author(s):  
Afiq Witri Muhammad Yazid ◽  
Nor Azwadi Che Sidik ◽  
Salim Mohamed Salim ◽  
Shuhaimi Mansor

This paper reports on the model sensitivity analysis of a commercial computational fluid dynamics program, ANSYS FLUENT v14. The purpose of the analysis was to determine the appropriate modeling settings for numerical model of the case study. A full scale of a simplified urban street canyon was modelled and the turbulent flow was calculated using Large Eddy Simulation (LES) techniques. The model sensitivity tests involved are mesh sensitivity, statistically steady state and sampling. Adequate numbers of cells, period time to achieve statistically steady state (SST) and sampling time to simulate wind flow and pollutant dispersion in street canyon were determined through systematic tests.


2017 ◽  
Vol 143 (708) ◽  
pp. 2714-2726 ◽  
Author(s):  
Beom-Soon Han ◽  
Seung-Bu Park ◽  
Jong-Jin Baik ◽  
Junho Park ◽  
Kyung-Hwan Kwak

Sign in / Sign up

Export Citation Format

Share Document