A decomposition of the strain energy release rate associated with the initiation of transverse cracking, longitudinal cracking and delamination in cross-ply laminates

2008 ◽  
Vol 84 (2) ◽  
pp. 186-197 ◽  
Author(s):  
J.-L. Rebière ◽  
D. Gamby
Keyword(s):  
Energy Release Rate ◽  
Energy Release ◽  
Release Rate ◽  
Strain Energy ◽  
Strain Energy Release Rate ◽  
Strain Energy Release ◽  
Transverse Cracking ◽  
Longitudinal Cracking

A new method for determining the strain energy release rate of an interface via force–depth data of nanoindentation tests

2008 ◽  
Vol 20 (2) ◽  
pp. 025701 ◽  
Author(s):  
Pal Jen Wei ◽  
Wen Long Liang ◽  
Chi Fong Ai ◽  
Jen Fin Lin
Keyword(s):  
Energy Release Rate ◽  
Energy Release ◽  
Release Rate ◽  
Strain Energy ◽  
Strain Energy Release Rate ◽  
Strain Energy Release ◽  
New Method ◽  
Depth Data

On the Axial Rigidity of a Perforated Strip and the Strain Energy Release Rate in a Centrally Notched Strip Subjected to Uniaxial Tension

1964 ◽  
Vol 86 (4) ◽  
pp. 693-697 ◽  
Author(s):  
R. G. Forman ◽  
A. S. Kobayashi
Keyword(s):  
Energy Release Rate ◽  
Energy Release ◽  
Uniaxial Tension ◽  
Release Rate ◽  
Strain Energy ◽  
Strain Energy Release Rate ◽  
Strain Energy Release ◽  
Theoretical Studies ◽  
Correction Factors ◽  
Elasticity Solutions

This paper presents theoretical studies on the axial rigidities in strips with circular and elliptical perforations and subjected to uniaxial tension. Greenspan’s original derivations on these axial rigidities [2] were improved by using the elasticity solutions by Howland [6] and Ishida [7] for infinite strips with circular and elliptical perforations, respectively. Finally, the correction factors for centrally notched strips subjected to uniaxial tension were rederived from the above results following the energy approach by Irwin and Kies [3].

Nonlinear Approach for Strain Energy Release Rate in Micro Cantilevers

2010 ◽  
Author(s):  
Arash Kheyraddini Mousavi ◽  
Seyedhamidreza Alaie ◽  
Maheshwar R. Kashamolla ◽  
Zayd Chad Leseman
Keyword(s):  
Surface Roughness ◽  
Crack Propagation ◽  
Energy Release Rate ◽  
Energy Release ◽  
Release Rate ◽  
Strain Energy ◽  
Strain Energy Release Rate ◽  
Strain Energy Release ◽  
Rigid Substrate ◽  
Micro Cantilever

An analytical Mixed Mode I & II crack propagation model is used to analyze the experimental results of stiction failed micro cantilevers on a rigid substrate and to determine the critical strain energy release rate (adhesion energy). Using nonlinear beam deflection theory, the shape of the beam being peeled off of a rigid substrate can be accurately modeled. Results show that the model can fit the experimental data with an average root mean square error of less than 5 ran even at relatively large deflections which happens in some MEMS applications. The effects of surface roughness and/or debris are also explored and contrasted with perfectly (atomically) flat surfaces. Herein it is shown that unlike the macro-scale crack propagation tests, the surface roughness and debris trapped between the micro cantilever and the substrate can drastically effect the energy associated with creating unit new surface areas and also leads to some interesting phenomena. The polysilicon micro cantilever samples used, were fabricated by SUMMIT V™ technology in Sandia National Laboratories and were 1000 μm long, 30 μm wide and 2.6 μm thick.

Influence of Loading History on Delamination in Multilayered Beam with Creep

2021 ◽  
Vol 1046 ◽  
pp. 23-28
Author(s):  
Victor Iliev Rizov
Keyword(s):  
Energy Release Rate ◽  
Energy Release ◽  
Release Rate ◽  
Strain Energy ◽  
Strain Energy Release Rate ◽  
Strain Energy Release ◽  
Time Dependent ◽  
External Loading ◽  
Loading History ◽  
Multilayered Beam

The present paper deals with an analytical study of the time-dependent delamination in a multilayered inhomogeneous cantilever beam with considering of the loading history. The multilayered beam exhibits creep behaviour that is treated by using a non-linear stress-strain-time relationship. The material properties are continuously distributed along the thickness and length of the layers. The external loading is applied in steps in order to describe the loading history. The analysis reveals that during each step of the loading, the strain energy release rate increases with time. The influences of crack length and location on the time-dependent strain energy release rate are also investigated.

scholarly journals Influence of ceramic dental crown coating substrate thickness ratio on strain energy release rate

2017 ◽  
Vol 908 ◽  
pp. 012018
Author(s):  
K Khasnulhadi ◽  
R Daud ◽  
F Mat ◽  
S N F M Noor ◽  
K S Basaruddin ◽  
...  
Keyword(s):  
Energy Release Rate ◽  
Energy Release ◽  
Release Rate ◽  
Strain Energy ◽  
Strain Energy Release Rate ◽  
Strain Energy Release ◽  
Thickness Ratio ◽  
Substrate Thickness ◽  
Dental Crown

Accurate evaluation of strain-energy release rate in unidirectional FRP compact-tension specimen

1997 ◽  
Vol 58 (3) ◽  
pp. 163-172 ◽  
Author(s):  
R. Ramesh Kumar ◽  
M.K. Jana ◽  
G. Venkateswara Rao ◽  
K.S. Anoop Kumar
Keyword(s):  
Energy Release Rate ◽  
Energy Release ◽  
Release Rate ◽  
Strain Energy ◽  
Strain Energy Release Rate ◽  
Strain Energy Release ◽  
Compact Tension ◽  
Compact Tension Specimen ◽  
Tension Specimen ◽  
Accurate Evaluation

Effect of Plastic Deformation on the Strain Energy Release Rate in a Centrally Notched Plate Subjected to Uniaxial Tension

1966 ◽  
Vol 88 (1) ◽  
pp. 82-86 ◽  
Author(s):  
R. G. Forman
Keyword(s):  
Plastic Deformation ◽  
Energy Release Rate ◽  
Energy Release ◽  
Uniaxial Tension ◽  
Correction Factor ◽  
Release Rate ◽  
Strain Energy ◽  
Strain Energy Release Rate ◽  
Strain Energy Release ◽  
Linear Elastic

This paper presents theoretical studies on the effect of plastic deformation on the strain energy release rate, G, of a plate under uniaxial tension with a central propagating crack. The linear elastic fracture mechanics solution for G is improved by using the Dugdale model for the crack and yielded region to obtain the axial rigidity of the plate. The axial rigidity is then used to obtain the solution for the strain energy release rate as the crack propagates. It is found that plastic deformation has a pronounced effect on G. A correction factor is presented for correcting the linear elastic solution for the strain energy release rate. The correction factor is found to depend upon the nominal (gross) stress to material yield stress ratio and the crack length to plate width ratio.

The Edge Delamination Test: Measuring the Critical Adhesion Energy of Thin-Film Coatings, Part II: Mode Mixity & Application

1994 ◽  
Vol 338 ◽  
Author(s):  
Edward O. Shaffer ◽  
Scott A. Sikorski ◽  
Frederick J. McGarry
Keyword(s):  
Thin Film ◽  
Energy Release Rate ◽  
Energy Release ◽  
Release Rate ◽  
Strain Energy ◽  
Strain Energy Release Rate ◽  
Strain Energy Release ◽  
Mode I ◽  
Rigid Substrate ◽  
Edge Delamination

ABSTRACTThe edge delamination test (EDT) is being developed to measure the critical energy required to cause a thin film, under biaxial tensile stress, to debond from a rigid substrate[1]. The test uses circular features etched through biaxially stressed films adhered to a rigid substrate. If the stress is large enough, a stable debond ring grows radially about the feature. We use a finite element analysis to model the test, solving for the applied strain energy release rate as a function of crack length, feature hole radius and other geometrical parameters. The model identifies both mode I and mode II components of the strain energy release rate, and agrees with previous analytical solutions for the total debond energy. However, the model predicts, with a very refined mesh at the crack tip, the fracture process is pure mode I. To explore this result, critical strain energy release rates from the EDT and the island blister test (IBT) are compared. This agreement supports the model prediction that the failure process in the EDT is modeI peeling.

Sign in / Sign up

Export Citation Format

Share Document