scholarly journals Numerical study of an Evacuated Tube Solar Collector incorporating a Nano-PCM as a latent heat storage system

2021 ◽  
Vol 24 ◽  
pp. 100859
Author(s):  
Raja Elarem ◽  
Talal Alqahtani ◽  
Sofiene Mellouli ◽  
Walid Aich ◽  
Nidhal Ben Khedher ◽  
...  
Keyword(s):  
Latent Heat ◽  
Solar Collector ◽  
Heat Storage ◽  
Numerical Study ◽  
Storage System ◽  
Latent Heat Storage ◽  
Evacuated Tube Solar Collector ◽  
Evacuated Tube

Experimental Investigation on a Latent Heat Thermal Storage Unit for Solar Cooling Application

Green ◽  
2011 ◽  
Vol 1 (2) ◽  
Author(s):  
L. Chidambaram ◽  
A. S. Ramana ◽  
G. Kamaraj ◽  
R. Velraj
Keyword(s):  
Solar Energy ◽  
Latent Heat ◽  
Solar Collector ◽  
Heat Storage ◽  
Storage System ◽  
Thermal Storage ◽  
Environmental Crisis ◽  
Storage Unit ◽  
Latent Heat Storage ◽  
Solar Cooling

AbstractConventional cooling technologies that utilize harmful refrigerants consume more energy and cause peak loads leading to negative environmental impacts. As the world grapples with the energy and environmental crisis, there is an urgent need to develop and promote environmentally benign sustainable cooling technologies. Solar cooling is one such promising technology, given the fact that solar energy is the cheapest and most widely available renewable energy that matches the cooling load requirements. However thermal storage systems are essential to overcome the disadvantage of the intermittent nature of solar energy and variations in the cooling demand. The enhanced utilization of solar energy and other consequences of thermal storage integrated systems have gained the attention of researchers in recent years. The concept of combined sensible and latent heat storage system is successfully introduced in several applications and it has many advantages. This paper presents the performance of the solar collector system and the charging characteristics of a PCM based latent heat thermal storage unit, which is designed to provide continuous supply of heat for the operation of 1 kW vapor absorption refrigeration unit. Investigations on PCM integrated thermal storage system have revealed improvement in heat storage capacity, lower heat loss and an increased solar collector efficiency due to better thermal stratification.

Numerical study of a latent heat storage system adapted to concentrated solar power (CSP) plants at medium temperatures

2019 ◽  
Author(s):  
Abderrahim El Youssfi ◽  
Mohamed Asbik ◽  
Hassan Agalit ◽  
Khadija El Alami ◽  
Reda Boualou
Keyword(s):  
Latent Heat ◽  
Solar Power ◽  
Heat Storage ◽  
Numerical Study ◽  
Storage System ◽  
Concentrated Solar Power ◽  
Latent Heat Storage

scholarly journals Effective Separation of a Water in Oil Emulsion from a Direct Contact Latent Heat Storage System

Energies ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 2264 ◽  
Author(s):  
Sebastian Ammann ◽  
Andreas Ammann ◽  
Rebecca Ravotti ◽  
Ludger Fischer ◽  
Anastasia Stamatiou ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Latent Heat ◽  
Direct Contact ◽  
Heat Storage ◽  
Storage System ◽  
Heat Transfer Fluid ◽  
Storage Unit ◽  
Latent Heat Storage ◽  
Oil Emulsion ◽  
Water In Oil Emulsion

The problem of emulsification between Phase Change Material (PCM) and Heat Transfer Fluid (HTF) in direct contact latent heat storage systems has been reported in various studies. This issue causes the PCM to flow out of the storage tank and crystallize at unwanted locations and thus presents a major limitation for the proper operation of such systems. These anomalies become more pronounced when high HTF flow rates are employed with the aim to achieve fast heat transfer rates. The goal of this paper is to find a method which will enable the fast separation of the formed emulsion and thus the uninterrupted operation of the storage unit. In this study, three separation methods were examined and the use of superhydrophobic filters was chosen as the best candidate for the demulsification of the PCM and HTF mixtures. The filter was produced by processing of a melamine sponge with different superhydrophobic adhesives and was tested with emulsions closely resembling the ones formed in a real direct contact setup. The superhydrophobic filter obtained, was able to separate the emulsions effectively while presenting a very high permeability (up to 1,194,980 kg h−1 m−2 bar−1). This is the first time the use of a superhydrophobic sponge has been investigated in the context of demulsification in direct contact latent heat storage.

scholarly journals A Domestic Solar/Heat Pump Heating System Incorporating Latent and Stratified Thermal Storage

2008 ◽  
Author(s):  
Christoph Trinkl ◽  
Wilfried Zo¨rner ◽  
Vic Hanby
Keyword(s):  
Latent Heat ◽  
Heat Pump ◽  
Solar Collector ◽  
Energy Demand ◽  
Heat Storage ◽  
Thermal Storage ◽  
Heating System ◽  
System Control ◽  
Latent Heat Storage ◽  
Solar Heat

Both solar and heat pump heating systems are innovative technologies for sustaining ecological heat generation. They are gaining more and more importance due to the accelerating pace of climate change and the rising cost of limited fossil resources. Against this background, a heating system combining solar thermal collectors, heat pump, stratified thermal storage and water/ice latent heat storage has been investigated. The major advantages of the proposed solar/heat pump heating system are considered to be its flexible application (suitable for new and existing buildings because of acceptable space demand) as well as the improvement of solar fraction (extended solar collector utilisation time, enhanced collector efficiency), i.e. the reduction of electric energy demand for the heat pump. In order to investigate and optimise the heating system, a dynamic system simulation model was developed. On this basis, a fundamental control strategy was derived for the overall coordination of the heating system with particular regard to the performance of the two storage tanks. In a simulation study, a fundamental investigation of the heating system configuration was carried out and optimisation derived for the system control as well as the selection of components and their dimensioning. The influence of different parameters on the system performance was identified, where the collector area and the latent heat storage volume were found to be the predominant parameters for system dimensioning. For a modern one-family house, a solar collector area of 30m2 and a latent heat store volume of 12.5m3 are proposed. In this configuration, the heating system reaches a seasonal performance factor of 4.6, meaning that 78% of the building’s and users’ heat demand are delivered by solar energy. The results show that the solar/heat pump heating system can give an acceptable performance using up-to-date components in a state-of-the-art building.

A novel liquid air energy storage system using a combination of sensible and latent heat storage

2021 ◽  
pp. 117890
Author(s):  
Ju-Yeol Ryu ◽  
Adrian Alford ◽  
Graham Lewis ◽  
Yulong Ding ◽  
Yunren Li ◽  
...  
Keyword(s):  
Energy Storage ◽  
Latent Heat ◽  
Heat Storage ◽  
Storage System ◽  
Energy Storage System ◽  
Latent Heat Storage
Sign in / Sign up

Export Citation Format

Share Document